Jump to content


  • 0
Anakin

Installing clients SCCM 2012

Question

Hello friends, I have a problem for several days, I installed a secondary site, all is well, has instaldo over 10 clients in the same place, but I have several that are not installed, and is not validé firewall is disabled, I also ping from the primary site to the computer name is not a problem domain, not permission because the account is domain administrator, here I leave the log to give me an idea, thanks

 

 

 

 

log ccm.

 

======>Begin Processing request: "2097152137", machine name: "PCCLIENTE" 05/10/2012 15:18:55 6556 (0x199C)

Execute query exec [sp_IsMPAvailable] N'ARG' 05/10/2012 15:18:55 6556 (0x199C)

---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) 05/10/2012 15:18:55 6556 (0x199C)

---> Attempting to connect to administrative share '\\PCCLIENTE.Midominio.com\admin$' using account Midominio\Count Domain Admin' 05/10/2012 15:18:55 6556 (0x199C)

---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account MIDOMINIO\Count Domain Admin (00000035) 05/10/2012 15:18:56 6556 (0x199C)

---> The device PCCLIENTE.Midominio.com does not exist on the network. Giving up 05/10/2012 15:18:56 6556 (0x199C)

---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0) 05/10/2012 15:18:56 6556 (0x199C)

---> Attempting to connect to administrative share '\\PCCLIENTE\admin$' using account Midominio\Count Domain Admin' 05/10/2012 15:18:56 6556 (0x199C)

---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account MIDOMINIO\Count Domain Admin (00000035) 05/10/2012 15:19:04 6556 (0x199C)

---> The device PCCLIENTE does not exist on the network. Giving up 05/10/2012 15:19:04 6556 (0x199C)

---> ERROR: Unable to access target machine for request: "2097152137", machine name: "PCCLIENTE", access denied or invalid network path. 05/10/2012 15:19:04 6556 (0x199C)

Execute query exec [sp_CP_SetLastErrorCode] 2097152137, 53 05/10/2012 15:19:04 6556 (0x199C)

Stored request "2097152137", machine name "PCCLIENTE", in queue "Retry". 05/10/2012 15:19:04 6556 (0x199C)

Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152137, 2 05/10/2012 15:19:04 6556 (0x199C)

Execute query exec [sp_CP_SetLatest] 2097152137, N'10/05/2012 18:19:04', 34 05/10/2012 15:19:04 6556 (0x199C)

<======End request: "2097152137", machine name: "PCCLIENTE". 05/10/2012 15:19:04 6556 (0x199C)

Thread has been inactive too long. Closing thread 05/10/2012 15:29:04 6556 (0x199C)

Share this post


Link to post
Share on other sites

Recommended Posts

  • 0

What method are you installing the client by....Push..update..or manual?

Is there any sign that the machines are even getting the client advertisement...check this is Task manager...services there chould be a ccmsetup.exe service running...

 

Where these machines alrady existing on your network/AD/DNS infratstructure prior to implementing SCCM......if so I have came across this problem umpteen times before and my solution is simply to delete the DNS records of these problematic PCs from the DNS console...reboot the PCs so they get a new DNS entry and try again...this has worked for me as I said many..many times..

Share this post


Link to post
Share on other sites

  • 0

Thank you very much for responding, I do both automatic and manual way and in the console tells me what I put up, log in, and is remotely within the realm, in another place, and the error is the same, what happens is that I can not see the client because I'm far from the place, in another country, but I installed in the same place more than 20 teams, but they give me the problem;

Share this post


Link to post
Share on other sites

  • 0

You say you can ping these computers from Primary site but can you browse to the admin shares on the problematic computers i:e \\PCName\admin$

if not then you may have a WMI issue.

 

Also try wbemtest.exe from Primary Site to try and get into the namespace of the problematic PCs....again if this not work either then you definitely have a WMI issue with these PCs..

Where these machines alrady existing on your network/AD/DNS infratstructure prior to implementing SCCM......if so I have came across this problem umpteen times before and my solution is simply to delete the DNS records of these problematic PCs from the DNS console...reboot the PCs so they get a new DNS entry and try again...this has worked for me as I said many..many times..

 

Have you tried this?

Share this post


Link to post
Share on other sites

  • 0

Hi,

 

Please help me. I have problem with Client Push Install. WS2012R2 is my onyl sccm server. I guess I have some cert problem that I cannot setup properly. If I check under Servers and Site System Roles -> Distribution Point properties, it says HTTPS is the protocol that clients use to communicate and HTTP is inactive! If I check Management Point here, it is the same: HTTPS is active and cannot change to HTTP because it is grayed out.

 

I checked the log file on client machine (ccmsetup.log), and has the following:

 

Begin to select client certificate ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'. ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
There are no certificates in the 'MY' store. ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
GetSSLCertificateContext failed with error 0x87d00280 ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Sending Fallback Status Point message to 'SCCM.NET.LOCAL', STATEID='315'. ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Params to send FSP message '5.0.7958.1000 Deployment Error 0x87d00280' ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Request failed: 404 Not Found
GetHttpRequestObjects failed for verb: 'CCM_POST', url: 'HTTPS://SCCM.net.local/ccm_system/request' ccmsetup 2015.01.13.8:40:33 2008 (0x07D8)
GetDPLocations failed with error 0x87d00280 ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Failed to get DP locations as the expected version from MP 'HTTPS://SCCM.net.local'.Error 0x87d00280 ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)

Sending Fallback Status Point message to 'SCCM.NET.LOCAL', STATEID='101'. ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Params to send FSP message '5.0.7958.1000 Deployment ' ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)
Request failed: 404 Not Found
Next retry in 10 minute(s)... ccmsetup 2015.01.13. 8:40:33 2008 (0x07D8)

 

I didn't find any step-by-step tutorial of making the right cert on my cert aut. server (in this case, this one is my DC).

 

I created an AD user for client push install that can access for example \\clientmachine\admin$

So this is OK.

 

Can you please help me what to do exactly?

 

Many thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.