Jump to content


Sohanpal

SCCM 2012 Install Client has two Actions only

Recommended Posts

Hello Guys,

 

I am very new to sccm 2012 and it seems I have hit a stow stopper when installing Client

 

In my test lab i have one machine Server 2008 R2 hosting SCCM, SQL Server and DC. I only have one machine (no separate machine for client) so I need to learn using this only. Machine has 4 processors and 16 GB RAM. So H/W is not that bad.

 

Installed all the above three components and when tried to install the client on this machine I have only TWO actions listed. This client has not sent its H/W and S/W inventory too.

 

Client machine in my case is also the domain controller. :(

 

My Server Time was 3:23 PM when the installation was started. You might want to ignore the logfiles prior to this timestamp

 

I am attaching the ccmsetup.log, Loccationservices.log, Clientlocation.log, Datatransferservice.log and ContentTransfermanager.log and ccm.log

 

I have tried to install it from Command prompt using CCMSETUP.EXE and from the GUI using Client installation.

 

Rebooted machine several times. Still no luck.

 

Help me Guys.

 

Thanks for reading !!

Cheers

DP

 

 

Forum Files.zip

Share this post


Link to post
Share on other sites

GarthMJ : I have added new boundary with IPv prefix in the existing boundary group. Uninstalled existing client and installed client once again without any success.

 

If there any way I can confirm that it boundary issue or something else ?

 

Thanks

DP

Share this post


Link to post
Share on other sites

In a single boundary group i HAD three boundaries,


1) IP RANGE FROM 192.168.203.0 TO 192.168.203.255

2) AD site and Service. This site has affected PC

3) IPv6 Prefix for this affected PC.


Link-local IPv6 Address . . . . . : fe80::f8c4:f50:9059:5a47%14

IPv4 Address. . . . . . . . . . . : 192.168.203.141

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.203.1


I have now one boundary with AD site and services. And when the client is installed. I am able to see the Site from Client applet.


Thanks

Share this post


Link to post
Share on other sites

Try this, i had a similar problem solved by this.

 

Go into Boundary Groups > Select relevant group > Properties > References > "Use this boundary group for site assignment"

 

Make sure that's ticked and it's showing assigned site as your primary site code in the drop down below.

 

Also, be useful to see ClientIDManagerStartup.log - may be that your clients isn't registering correctly

Share this post


Link to post
Share on other sites

It seems the client is not registering, log files below. In my case the machine is Server 2008 R2. This is from ClientIDManagerStartup.log.

 

I don't have an option to have another machine, its just one machine with (DC, SQL Server and SCCM) and the same machine i am trying to install the client

 

No SMBIOS Changed ClientIDManagerStartup 9/30/2014 10:51:22 AM 7148 (0x1BEC)
SMBIOS unchanged ClientIDManagerStartup 9/30/2014 10:51:22 AM 7148 (0x1BEC)
SID unchanged ClientIDManagerStartup 9/30/2014 10:51:22 AM 7148 (0x1BEC)
HWID unchanged ClientIDManagerStartup 9/30/2014 10:51:22 AM 7148 (0x1BEC)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 9/30/2014 10:51:23 AM 7148 (0x1BEC)
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE ClientIDManagerStartup 9/30/2014 10:51:23 AM 7148 (0x1BEC)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 9/30/2014 10:51:23 AM 7148 (0x1BEC)
Computed HardwareID=2:CD682909A0B1AE86D98CFB7095E49771D509888D
Win32_SystemEnclosure.SerialNumber=<empty>
Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
Win32_BaseBoard.SerialNumber=None
Win32_BIOS.SerialNumber=VMware-42 06 bc 5f 6a ed 6b 47-d0 2c cb e7 17 c2 69 87
Win32_NetworkAdapterConfiguration.MACAddress=00:50:56:01:00:42 ClientIDManagerStartup 9/30/2014 10:51:23 AM 7148 (0x1BEC)
[RegTask] - Client is not registered. Sending registration request for GUID:3DBEFAF9-0E2D-4392-8F90-F109B0EDD047 ... ClientIDManagerStartup 9/30/2014 10:51:23 AM 7148 (0x1BEC)
[RegTask] - Client registration is pending. Server assigned ClientID is GUID:3DBEFAF9-0E2D-4392-8F90-F109B0EDD047 ClientIDManagerStartup 9/30/2014 10:51:24 AM 7148 (0x1BEC)
[RegTask] - Sleeping for 60 seconds ... ClientIDManagerStartup 9/30/2014 10:51:24 AM 7148 (0x1BEC)
[RegTask] - Client registration is pending. Sending confirmation request for GUID:3DBEFAF9-0E2D-4392-8F90-F109B0EDD047 ... ClientIDManagerStartup 9/30/2014 10:52:24 AM 7148 (0x1BEC)
[RegTask] - Client is registered. Server assigned ClientID is GUID:3DBEFAF9-0E2D-4392-8F90-F109B0EDD047. Approval status 0 ClientIDManagerStartup 9/30/2014 10:52:24 AM 7148 (0x1BEC)
Raising event:
[sMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_RemoteClient_Reassigned
{
ClientID = "GUID:3DBEFAF9-0E2D-4392-8F90-F109B0EDD047";
DateTime = "20140930095224.515000+000";
LastAssignedSite = "";
MachineName = "DILPREETSVR-001";
NewAssignedSite = "TST";
ProcessID = 4592;
SiteCode = "TST";
ThreadID = 7148;
};
ClientIDManagerStartup 9/30/2014 10:52:24 AM 7148 (0x1BEC)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.