Jump to content


AndyCompanyZ

Image not deploying to task sequence

Recommended Posts

Hello All

 

Been a many time reader of these great forums but first time asking for help.

I have an issue with trying to run a task sequence. I have created a new wim through CM and originally I put down one of our servers as the save point for it.

When I built the TS I selected this file as the windows image but when I ran the TS it failed at this point saying it couldn't find the file "a package referenced by the task sequence could not be found". I moved the wim to the SCCM local server as the distmgr.log said it couldn't find the file/or didn't have access rights to it. Again I got the same failure (I know it is this wim that's the problem because I swapped it for another wim in the same TS and it started loading fine).

I have had a look at distmgr.log and these are, I think, the salient points:

 

Taking package snapshot for package WS100166 from source \\whitgift-nas6\Software\SCCM 2012\Images\BaseImage.wim $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.966+00><thread=8292 (0x2064)>
Failed to find space for 15325096512 bytes. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.990+00><thread=8292 (0x2064)>
CFileLibrary::FindAvailableLibraryPath failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.991+00><thread=8292 (0x2064)>
CFileLibrary::AddFile failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.991+00><thread=8292 (0x2064)>
CContentDefinition::AddFile failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.992+00><thread=8292 (0x2064)>
Failed to add the file. Please check if this file exists. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.992+00><thread=8292 (0x2064)>
SnapshotPackage() failed. Error = 0x8007050F $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.995+00><thread=8292 (0x2064)>
STATMSG: ID=2361 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Whitgift-SCCM1.Whitgift.co.uk SITE=WS1 PID=8220 TID=8292 GMTDATE=Thu Nov 13 11:00:18.996 2014 ISTR0="\\whitgift-nas6\Software\SCCM 2012\Images\BaseImage.wim" ISTR1="Base Image" ISTR2="WS100166" ISTR3="30" ISTR4="98" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="WS100166" $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.996+00><thread=8292 (0x2064)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=WS100166, Version=2, Status=2302 $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:18.998+00><thread=8292 (0x2064)>
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Whitgift-SCCM1.Whitgift.co.uk SITE=WS1 PID=8220 TID=8292 GMTDATE=Thu Nov 13 11:00:19.022 2014 ISTR0="Base Image" ISTR1="WS100166" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="WS100166" $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:19.022+00><thread=8292 (0x2064)>
~Failed to process package WS100166 after 2 retries, will retry 98 more times $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:19.025+00><thread=8292 (0x2064)>
~Exiting package processing thread. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:19.028+00><thread=8292 (0x2064)>
~Used 0 out of 3 allowed processing threads. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:24.053+00><thread=8596 (0x2194)>
~Sleep 537 seconds... $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:00:24.055+00><thread=8596 (0x2194)>
~Used 0 out of 3 allowed processing threads. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.098+00><thread=8596 (0x2194)>
~Starting package processing thread, thread ID = 0x1228 (4648) $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.598+00><thread=8596 (0x2194)>
~Sleep 1283 seconds... $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.603+00><thread=8596 (0x2194)>
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Whitgift-SCCM1.Whitgift.co.uk SITE=WS1 PID=8220 TID=4648 GMTDATE=Thu Nov 13 11:09:26.613 2014 ISTR0="WS10019F" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="WS10019F" $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.613+00><thread=4648 (0x1228)>
~Retrying package WS10019F $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.614+00><thread=4648 (0x1228)>
Start adding package WS10019F... $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.615+00><thread=4648 (0x1228)>
~The Package Action is 2, the Update Mask is 268435456 and UpdateMaskEx is 0. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.615+00><thread=4648 (0x1228)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=WS10019F, Version=1, Status=2300 $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.615+00><thread=4648 (0x1228)>
Taking package snapshot for package WS10019F from source \\whitgift-sccm1\SMS_WS1\wim\NewImage71e.wim $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.638+00><thread=4648 (0x1228)>
Failed to find space for 26334815828 bytes. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.661+00><thread=4648 (0x1228)>
CFileLibrary::FindAvailableLibraryPath failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.662+00><thread=4648 (0x1228)>
CFileLibrary::AddFile failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.663+00><thread=4648 (0x1228)>
CContentDefinition::AddFile failed; 0x8007050f $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.664+00><thread=4648 (0x1228)>
Failed to add the file. Please check if this file exists. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.665+00><thread=4648 (0x1228)>
SnapshotPackage() failed. Error = 0x8007050F $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.669+00><thread=4648 (0x1228)>
STATMSG: ID=2361 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Whitgift-SCCM1.Whitgift.co.uk SITE=WS1 PID=8220 TID=4648 GMTDATE=Thu Nov 13 11:09:26.670 2014 ISTR0="\\whitgift-sccm1\SMS_WS1\wim\NewImage71e.wim" ISTR1="NewImage71e" ISTR2="WS10019F" ISTR3="30" ISTR4="96" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="WS10019F" $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.670+00><thread=4648 (0x1228)>
~Failed to take snapshot of package WS10019F $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.674+00><thread=4648 (0x1228)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=WS10019F, Version=1, Status=2302 $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.675+00><thread=4648 (0x1228)>
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Whitgift-SCCM1.Whitgift.co.uk SITE=WS1 PID=8220 TID=4648 GMTDATE=Thu Nov 13 11:09:26.693 2014 ISTR0="NewImage71e" ISTR1="WS10019F" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="WS10019F" $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.693+00><thread=4648 (0x1228)>
~Failed to process package WS10019F after 4 retries, will retry 96 more times $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.696+00><thread=4648 (0x1228)>
~Exiting package processing thread. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:26.697+00><thread=4648 (0x1228)>
~Used 0 out of 3 allowed processing threads. $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:31.730+00><thread=8596 (0x2194)>
~Sleep 1278 seconds... $$<SMS_DISTRIBUTION_MANAGER><11-13-2014 11:09:31.733+00><thread=8596 (0x2194)>

 

I have been on this for 2 days now and it is a real mystery as I have done lots of TS and wims recently and never had this problem before.

 

Any help would be appreciated

Share this post


Link to post
Share on other sites

the error translates to:

 

The requested file operation failed because the storage quota was exceeded.
To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.

Source: Windows
-----

 

 

so is there some quota configured ?

Share this post


Link to post
Share on other sites

Remote Differential Compression IS enabled on the DPs so it isn't that. There is also no quota set on the server. I have discovered what the issue probably is in that the server has run out of space (Again!!) and that SCCM basically just eats up disc space for no apparent reason, we started on 250GB at Easter and now we are at 500GB and all we have are a few images and some programs. I did notice though in the ContentLib folder that there are lots of folders

that seem to contain more folders with the names of everything on our servers and within these are .dlls. Is this replication the reason why SCCM keeps

filling up with data and what would happen if I deleted them (would they be created again?)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.