No "TCPIP configuration", On PXE After loading WinPE reboot

[pascal 0]

Hello,

 

 

The Task Sequence that was deploying W7 with SCCM 2012 SP1 has stopped to deploying the Lenovo X240 laptop.

 

The Laptop must load WinPE on Workgroup & PXE

 

When I get on F8 to get an ipconfig, nothing but the message "configuration IP" is dysplayed, then WinPE reboot.

 

I don't know if the laptop has joined the workgroup

 

The smsts.log show 2 mains errors :

 

Failed to download pxe variable file. Code(0x00000001) TSPxe 24/07/2015 16:09:06 1176 (0x0498)

PxeGetPxeData failed with 0x80004005 TSPxe 24/07/2015 16:09:06 1176 (0x0498)

RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence TSBootShell 24/07/2015 16:09:06 784 (0x0310)

GetTsRegValue() failed. 0x80070002. TSBootShell 24/07/2015 16:09:06 784 (0x0310)

The driver are the following : http://support.lenovo.com/us/en/downloads/ds038819

Please, Help me.

[Ibtechie 0]

If it helps any at all, we had this issue with our X250 after upgrading to 2012R2 SP1. Our smsts logs showed in Red not Yellow PxeGetPxeData failed with 0x80004005: also could not do ipconfig/renew which lead us to our boot.wim drivers

We tried several different drivers and even ones from Intel. Our working solution was to get the WinPE 5.0 drivers from Lenovo and update our boot wim with these. http://support.lenovo.com/us/en/downloads/ds102312

However, I did see a few posting on the Lenovo forums with the x240 having some issues such as these.

Our enterprise image is win7x64. I did add the win8.1 x64 driver to our boot wim and we are happy campers once again.

 

Good Luck!

[pascal 0]

Thanks for you reply

[pascal 0]

I use SCCM 2012 SP1 that work with the Boot Image 4.0.

I don't know if a Boot Image 4.0 support a WinPE 5.0.

 

Otherwise, my Boot Image & OS are both on x86 types.

I will search to know if that type of drivers exists for Windows PE x86 & Lenovo X240.

 

 

Best regards

[pascal 0]

It seems to be a driver issue because when I try a ipconfig /renew, I get the following message :

 

The operation failed as no adapter is in the state permissible for this operation.

With the following preconization :

WinPE 3 = Drivers Windows 7
WinPE 4 = Drivers Windows 8
WinPE 5 = Drivers Windows 8.1

I have test the following configuration without succeed :

- SCCM 2012 SP1,

- Boot Image x64 4.0 / WinPE 6.2.9200.16384 / Driver SCCM Lenovo X240 for Windows 8 x64,

- TS W7 x86 / drivers SCCM Lenovo X240 for Windows 7 x86.

Any more advice, please ?

[Peter van der Woude 143]

It really sounds like you're using the wrong driver, please double check that you're using the right driver for the NIC. Double check stuff like the model and version.