Jump to content


  • 0
marcinw

Problem with Broadcom Netxtreme drivers in WinPE 10 x64 on HP XW4600

Question

Dear Forum,

 

I have problem deploying HP XW4600 workstation with SCCM. I'm using WinPE 10 x64 from MDT2013.

I was following this procedure to find out card driver (I also tried driver from running WIndows 7x64):

https://www.niallbrady.com/2011/08/31/missing-nic-driver-in-winpe-boot-image-no-problem/

 

So my card is definitely:

Broadcom NetXtreme Gigabit Ethernet

PCI\VEN_14E4&DEV_167B&SUBSYS_1308103C

 

I took driver for x64 Desktop/Mobile/Server (x64) version 17.2.0.2 from:

https://www.broadcom.com/support/ethernet-nic-netxtreme-i-desktop-mobile

 

When I load the driver with drvload b57nd60a.inf

it says that driver was loaded fine, then I do the:

wpeutil initializeNetwork
followed by
ipconfig

 

but cannot get IP address from the server.

 

I've also tried: HP Client Windows PE 10 x64 Driver Pack

from: http://ftp.hp.com/pub/caps-softpaq/cmit/softpaq/WinPE10.html

without success...

In the past I've been using 32bit WinPE and these XP workstations were installing fine.

 

Could You please help me to detect and insert correct driver ?

 

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Dear Forum,

 

I have problem deploying HP XW4600 workstation with SCCM. I'm using WinPE 10 x64 from MDT2013.

I was following this procedure to find out card driver (I also tried driver from running WIndows 7x64):

https://www.niallbrady.com/2011/08/31/missing-nic-driver-in-winpe-boot-image-no-problem/

 

So my card is definitely:

Broadcom NetXtreme Gigabit Ethernet

PCI\VEN_14E4&DEV_167B&SUBSYS_1308103C

 

I took driver for x64 Desktop/Mobile/Server (x64) version 17.2.0.2 from:

https://www.broadcom.com/support/ethernet-nic-netxtreme-i-desktop-mobile

 

When I load the driver with drvload b57nd60a.inf

it says that driver was loaded fine, then I do the:

wpeutil initializeNetwork
followed by
ipconfig

 

but cannot get IP address from the server.

 

I've also tried: HP Client Windows PE 10 x64 Driver Pack

from: http://ftp.hp.com/pub/caps-softpaq/cmit/softpaq/WinPE10.html

without success...

In the past I've been using 32bit WinPE and these XP workstations were installing fine.

 

Could You please help me to detect and insert correct driver ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.