Jump to content


anyweb

using Offline Mode in Windows PE using USMT 4 via a task sequence in SCCM 2007 SP2

Recommended Posts

Hello,

 

Just wondering if anyone had an other suggestions to my issue:

 

"look for the loadstate.log file in this location, it's listed clearly in your smsts-.... log file (did you look at the contents of that log file?)

 

C:\Windows\SysWOW64\CCM\Logs\SMSTSLog\loadstate.log

 

post that loadstate.log file here and we'll help you."

 

 

When I go to C:\Windows\SysWOW64\CCM\Logs there is not another folder called SMSTSLog.

 

I even ran a search on the entire C: drive for loadstate.log and it didn't find it.

 

 

Just incase i messed up on the Task Sequence I have attached a copy of it.

Attached Files

Share this post


Link to post
Share on other sites

I saw this up before, thanks for the tip. Can this be used offline in PE though? I thought the Request, Capture, Release had to be done online

 

I have the same question...

Is it possible to do an Offline - In-place upgrade using SMP?

All i get are errors saying it cant find hte SMP..

 

Alternatively if i do it live on the machine...with 2012 you need to copy all packages refering to teh TS locally...essentially doubling the storage requirements.

 

Any help would be great. Cheers

Share this post


Link to post
Share on other sites

I actually have a strange issue going on. I am using the XP to W7 Demo TS as my template for hardlink USMT however during the process the XCOPY command seems to be trying to copy the entire contents of my distribution point to the client. The command I am executing is as follows:

 

xcopy * %systemdrive%\USMTbits\X86 /herciy

 

I am also including a package that includes the x86 folder of the USMT folder in the "Run Command Line". What I was expecting to happen was that the contents of the package should be copied to the %systemdrive%\USMTbits\X86 folder, not the entire contents of my DP. The result is that the TS takes a huge amount of time and fills the drive of the client workstation. I am going to poke around and see if I can use a batch file to copy the USMT files and the runscanstate batchfile. If anyone has any ideas on how to fix my xcopy problem and to limit what xcopy is copying I would appreciate it.

Share this post


Link to post
Share on other sites

I am getting a slight problem when i run the offline hardlink TS. When it runs my runscanstate.bat file, it comes up with a "Settings store argument specified is invalid 0x00000091. I have been at it for a while and i need a second, third, and maybe even fourth eye on this. I have included the TS (xml) and the runscanstate syntax (txt). Please tell me what i am missing. Im starting to see double.

runscanstate.txt

USMT-HARDLINK-TEST(Offline).xml

Share this post


Link to post
Share on other sites

I would say this is very impressive solution! Before I adopt it for my deployment, I'd like to know if I am able to achieve similar result by just adding an additional "Restart Computer" as the very first task in with my traditional MDT Task Sequence? I have no offend but seeking a simpler and safer solution.

 

Thanks a lot.

Share this post


Link to post
Share on other sites

Hello


I am new in SCCM, so sorry about possible silly questions. I have
build up a base image (wim file) that has all the apps and basic
configurations. For the final deploy for my users i have a TS that apply
that base wim with a few other step, namely driver packages and a
registry change that redirects the folder “users” for the D: drive.
Everything works fine, Now what i need to do is to build a new TS for
refresh scenarios, following the above explanation everything seems to
work fines, except for the fact the my profiles are located on d:\users,
and when the TS finishes one of the two scenarios happens:


a) if i use the step to redirect the users profile do drive D:, when i
logon to the machine it creates a second profile in the D: drive. For
example if the user is John, a have a john profile (the old one
containing the real data) and a new one DOMAIN\john, which of course is
empty without the migrated data.


B) if i simply just disable this redirection step, when i logon it
creates a new profile named john in drive c:\users and it just ignores
the old profile in D:\users\john


I need to maintain the D:\users\john profile and that after the
refresh when the user logon it assumes the old profile. Can anyone help
me in this situation? what on hell am i doing wrong ….


Thanks on advanced :)

Share this post


Link to post
Share on other sites

Dear Sir
i followed you as described which is amazing by the way god bless you .. but i got error in the task sequence step Create USMToffline Folder Code 0x80040154, taking into consideration i am using SCCM 2012 R2 .. And i am booting from PXE by the way ..

Thank you so much for your efforts and helpful topics

Share this post


Link to post
Share on other sites

does the folder already exist ? is your command line correct ? are you trying to create the folder on a drive letter that doesn't exist or has changed ?

Share this post


Link to post
Share on other sites

What do you mean by the folder exist ?? if you mean the x86 yes it is .. in the path you mentioned .. but the question i wanted to ask since i read it where i shall copy it as you mentioned ??

 

Yes the command line correct "cmd.exe/c md %systemdrive%\USMToffline"

 

No the drive is exist and already windows installed on it and running

Share this post


Link to post
Share on other sites

post your logs here so we can see the real error.

if it doesn't know what the %systemdrive% variable is it will fail.

Share this post


Link to post
Share on other sites

Regards, folks!

 

I need help.

I try to create offline scenario to migrate WinXP PCs with two drives - c: system and d: data (user profiles and another folders, which mast to migrate) to Win7 with two drives - hidden BOOT and c:

 

I create this scenario. All works fine exept migrating not user profiles folders from D: drive.

 

 

Scanstate runing by

 

set USMT_WORKING_DIR=C:\WINDOWS\Temp\usmt
set MIG_OFFLINE_PLATFORM_ARCH=32
set errorlevel=
scanstate.exe z:\ /o /localonly /c /efs:copyraw /v:5 /l:scanstate.log /progress:scanstateprogress.log /i:singleuser.xml /i:MigApp.xml /i:MigUser.xml /i:CustomData.xml /encrypt /key:"888" /offline:offline_c-d.xml /ui:*
exit %errorlevel%

 

 

offline_c-d.xml :

<offline>
<winDir>
<path>C:\Windows</path>
</winDir>
<mappings>
<path>%PROFILESFOLDER%,D:\Documents and settings</path>
</mappings>
<failOnMultipleWinDir>1</failOnMultipleWinDir>
</offline>

 

CustomData.xml:

<migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/test">
<component type="Documents" context="System">
<displayName>cstm data</displayName>
<role role="Data">
<rules>
<include>
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns("* [*]", "Fixed")</script>
</objectSet>
</include>

<locationModify script="MigXmlHelper.Move('%SYSTEMDRIVE%\m_data')">
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns("* [*]", "Fixed")</script>
</objectSet>
</locationModify>

<unconditionalExclude>
<objectSet>
<pattern type="File">*\Local Settings\Temp\* [*]</pattern>
<pattern type="File">*\Local Settings\Temporary Internet Files\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\* [*]</pattern>
<pattern type="File">%CSIDL_PROGRAM_FILES%\* [*]</pattern>
<pattern type="File">*\MSOCache\* [*]</pattern>
<pattern type="File">*\SwSetup\* [*]</pattern>
<pattern type="File">*\ccmcache\* [*]</pattern>
<pattern type="File">*\install\* [*]</pattern>
<pattern type="File">*\inst\* [*]</pattern>
<pattern type="File">*\instal\* [*]</pattern>
<pattern type="File">*\pack\* [*]</pattern>
<pattern type="File">*\temp\* [*]</pattern>
<pattern type="File">*\tmp\* [*]</pattern>
<pattern type="File">*\ [pagefile.sys]</pattern>
<pattern type="File">*\ [hyberfil.sys]</pattern>
<pattern type="File">c:\ [*.sys]</pattern>
<pattern type="File">c:\ [*.com]</pattern>
<pattern type="File">*\ [*.tmp]</pattern>
<pattern type="File">c:\ [*.bat]</pattern>
<pattern type="File">c:\ [*.ini]</pattern>
<pattern type="File">c:\ [*.bin]</pattern>
<pattern type="File">c:\ [ntldr]</pattern>
</objectSet>
</unconditionalExclude>

</rules>
</role>
</component>
</migration>

 

I trying to link d: drive by mklink /j c:\drive_d d:\ . Link created but data from d: drive not saved :(

 

In scanstate.log in the drives list - drive d: is absent :

...........................

Architecture: 32-bit

Drives:
c: Type: Fixed, Bus type: Unknown, Hotplug: No

Users:

.............................

 

What i need to migrate not user profile folders from d: drive?

 

Share this post


Link to post
Share on other sites

Thanks for all your helpful SCCM 2007 guides they have been great (understatement) references. I was nearly there and about to celebrate until I noticed that the migrated files have not inherited permissions of their user and that there are padlocks on all of the files that migrate across. For example username JB had a document called letter.txt on their desktop which is migrated across. The document is there but when checking the permissions of the file only myself, administrators and system have full control on it and there are no other permissions meaning it is useless for JB. On checking the parent folder Desktop this has the correct permissions and allows user JB full control.

 

I know I can simply inherit the permissions but that won't be handy when doing this on 1000's of PCs. Is this anything that has been experienced before I couldn't see it on the previous 14 pages.

 

Thanks.

 

Edit : I tested this on Windows 7 to Windows 7 migration, is this specifically XP to Win 7?

Share this post


Link to post
Share on other sites

So how will I be able to use your xml files and other associated items if I'm going from windows xp 32 bit to windows 7 64 bit as far as files and folders within the task sequence?

 

Paul

Share this post


Link to post
Share on other sites

Thanks for all your helpful SCCM 2007 guides they have been great (understatement) references. I was nearly there and about to celebrate until I noticed that the migrated files have not inherited permissions of their user and that there are padlocks on all of the files that migrate across. For example username JB had a document called letter.txt on their desktop which is migrated across. The document is there but when checking the permissions of the file only myself, administrators and system have full control on it and there are no other permissions meaning it is useless for JB. On checking the parent folder Desktop this has the correct permissions and allows user JB full control.

 

I know I can simply inherit the permissions but that won't be handy when doing this on 1000's of PCs. Is this anything that has been experienced before I couldn't see it on the previous 14 pages.

 

Thanks.

 

Edit : I tested this on Windows 7 to Windows 7 migration, is this specifically XP to Win 7?

 

interesting i havn't seen this behaviour, right now i'm using the bitlocker frontend HTA (which incorporates this functionality), and i've not noticed any padlocks, can you show me a screenshot and are you using Configuration Manager 2012 or 2007 for this ?

Share this post


Link to post
Share on other sites

So how will I be able to use your xml files and other associated items if I'm going from windows xp 32 bit to windows 7 64 bit as far as files and folders within the task sequence?

 

Paul

 

easy, use x86 to capture (scanstate) and x64 to restore (loadstate) in terms of USMT.

Share this post


Link to post
Share on other sites

This is really helpful post.

 

i followed the process but it is failed in Runscanstate(do X86 Scanstate) with below mentioned error . can you please help me on this

 

Failed to run the action: do X86 Scanstate.

The specified disk or diskette cannot be accessed. (Error: 0000001A; Source: Windows)]LOG]!
***********************************
![LOG[Expand a string: WinPEandFullOS]LOG]!><time="12:42:40.185-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="executionenv.cxx:782">
<![LOG[Executing command line: smsswd.exe /run:M010010D cmd /c runscanstate-offlinewindir.bat %OSDStateStorePath% %systemdrive%]LOG]!><time="12:42:40.185-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="commandline.cpp:827">
<![LOG[[ smsswd.exe ]]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="main.cpp:289">
<![LOG[PackageID = 'M010010D']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="main.cpp:318">
<![LOG[baseVar = '', ContinueOnError='']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="main.cpp:319">
<![LOG[ProgramName = 'cmd /c runscanstate-offlinewindir.bat c:\USMToffline c:']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="main.cpp:320">
<![LOG[swdAction = '0001']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="main.cpp:321">
<![LOG[ResolveSource flags: 0x00000000]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3265">
<![LOG[sMSTSPersistContent: . The content for package M010010D will be persisted]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3274">
<![LOG[The package M010010D is found locally in the cache E:\_SMSTaskSequence\Packages\M010010D]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3301">
<![LOG[Resolved source to 'E:\_SMSTaskSequence\Packages\M010010D']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:449">
<![LOG[set command line: Run command line]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="0" thread="1192" file="commandline.cpp:731">
<![LOG[Working dir 'c:\USMTbits\']LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:542">
<![LOG[Executing command line: Run command line]LOG]!><time="12:42:40.216-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="commandline.cpp:827">
<![LOG[]LOG]!><time="12:42:40.466-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[c:\USMTbits>"c:\USMTbits\x86\scanstate.exe" "c:\USMToffline" /c /o /hardlink /efs:hardlink /nocompress /offlinewindir:c:\windows /v:5 /l:c:\windows\TEMP\SMSTSLog\scanstate.log /progress:c:\windows\TEMP\SMSTSLog\scanstateprogress.log /i:c:\USMTbits\x86\miguser.xml /i:c:\USMTbits\x86\migapp.xml ]LOG]!><time="12:42:40.466-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[]LOG]!><time="12:42:40.466-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[Process completed with exit code 26]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="commandline.cpp:1123">
<![LOG[]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[canState return code: 26]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:34">
<![LOG[Command line returned 26]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="runcommandline.cpp:565">
<![LOG[Entering ReleaseSource() for E:\_SMSTaskSequence\Packages\M010010D]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3616">
<![LOG[reference count 1 for the source E:\_SMSTaskSequence\Packages\M010010D before releasing]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3623">
<![LOG[Released the resolved source E:\_SMSTaskSequence\Packages\M010010D]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="InstallSoftware" context="" type="1" thread="1192" file="resolvesource.cpp:3656">
<![LOG[Process completed with exit code 26]LOG]!><time="12:42:40.513-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="12:42:40.529-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="instruction.cxx:3012">
<![LOG[Failed to run the action: do X86 Scanstate.
The specified disk or diskette cannot be accessed. (Error: 0000001A; Source: Windows)]LOG]!><time="12:42:40.529-240" date="06-08-2014" component="TSManager" context="" type="3" thread="1924" file="instruction.cxx:3103">
<![LOG[MP server http://primsccmsrv.newtonXXX.corp.network. Ports 80,443. CRL=false.]LOG]!><time="12:42:40.529-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="utils.cpp:5300">
<![LOG[setting authenticator]LOG]!><time="12:42:40.560-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="utils.cpp:5322">
<![LOG[set authenticator in transport]LOG]!><time="12:42:40.576-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:7751">
<![LOG[sending StatusMessage]LOG]!><time="12:42:40.591-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="libsmsmessaging.cpp:4025">
<![LOG[setting message signatures.]LOG]!><time="12:42:40.607-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:1297">
<![LOG[setting the authenticator.]LOG]!><time="12:42:40.607-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:1327">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: primsccmsrv.newtonXXX.corp.network:80 CCM_POST /ccm_system/request]LOG]!><time="12:42:40.607-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="libsmsmessaging.cpp:8621">
<![LOG[Request was succesful.]LOG]!><time="12:42:40.951-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:8956">
<![LOG[set a global environment variable _SMSTSLastActionRetCode=26]LOG]!><time="12:42:40.951-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="executionenv.cxx:668">
<![LOG[set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="12:42:40.951-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="12:42:40.951-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="executionenv.cxx:807">
<![LOG[Let the parent group (Run) decides whether to continue execution]LOG]!><time="12:42:40.998-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="instruction.cxx:3212">
<![LOG[Let the parent group (XCopy) decide whether to continue execution]LOG]!><time="12:42:40.998-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="instruction.cxx:2462">
<![LOG[Let the parent group (Offline Scanstate in WinPE) decide whether to continue execution]LOG]!><time="12:42:40.998-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="instruction.cxx:2462">
<![LOG[The execution of the group (Offline Scanstate in WinPE) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="12:42:40.998-240" date="06-08-2014" component="TSManager" context="" type="3" thread="1924" file="instruction.cxx:2425">
<![LOG[Failed to run the last action: do X86 Scanstate. Execution of task sequence failed.
The specified disk or diskette cannot be accessed. (Error: 0000001A; Source: Windows)]LOG]!><time="12:42:40.998-240" date="06-08-2014" component="TSManager" context="" type="3" thread="1924" file="engine.cxx:214">
<![LOG[MP server http://primsccmsrv.newtonXXX.corp.network. Ports 80,443. CRL=false.]LOG]!><time="12:42:41.013-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="utils.cpp:5300">
<![LOG[setting authenticator]LOG]!><time="12:42:41.044-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="utils.cpp:5322">
<![LOG[set authenticator in transport]LOG]!><time="12:42:41.044-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:7751">
<![LOG[sending StatusMessage]LOG]!><time="12:42:41.076-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="libsmsmessaging.cpp:4025">
<![LOG[setting message signatures.]LOG]!><time="12:42:41.091-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:1297">
<![LOG[setting the authenticator.]LOG]!><time="12:42:41.091-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:1327">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: primsccmsrv.newtonXXX.corp.network:80 CCM_POST /ccm_system/request]LOG]!><time="12:42:41.091-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="libsmsmessaging.cpp:8621">
<![LOG[Request was succesful.]LOG]!><time="12:42:41.326-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="libsmsmessaging.cpp:8956">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="12:45:40.098-240" date="06-08-2014" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:857">
<![LOG[The command completed successfully.]LOG]!><time="12:45:40.098-240" date="06-08-2014" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:939">
<![LOG[successfully launched command shell.]LOG]!><time="12:45:40.098-240" date="06-08-2014" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:430">
<![LOG[Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)]LOG]!><time="12:57:41.799-240" date="06-08-2014" component="TSManager" context="" type="0" thread="1924" file="tsmanager.cpp:866">
<![LOG[Task Sequence Engine failed! Code: enExecutionFail]LOG]!><time="12:57:41.799-240" date="06-08-2014" component="TSManager" context="" type="3" thread="1924" file="tsmanager.cpp:866">
<![LOG[****************************************************************************]LOG]!><time="12:57:41.799-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="tsmanager.cpp:889">
<![LOG[Task sequence execution failed with error code 80004005]LOG]!><time="12:57:41.799-240" date="06-08-2014" component="TSManager" context="" type="3" thread="1924" file="tsmanager.cpp:890">
<![LOG[Cleaning Up.]LOG]!><time="12:57:41.799-240" date="06-08-2014" component="TSManager" context="" type="1" thread="1924" file="tsmanager.cpp:637">
***********************
*****************************************************************************
scanstate log:-
2014-06-08 12:42:40, Info [0x000000] Command line: c:\USMTbits\x86\scanstate.exe c:\USMToffline /c /o /hardlink /efs:hardlink /nocompress /offlinewindir:c:\windows /v:5 /l:c:\windows\TEMP\SMSTSLog\scanstate.log /progress:c:\windows\TEMP\SMSTSLog\scanstateprogress.log /i:c:\USMTbits\x86\miguser.xml /i:c:\USMTbits\x86\migapp.xml
2014-06-08 12:42:40, Status [0x000000] Activity: 'MIGACTIVITY_COMMAND_LINE_PROCESSING'
2014-06-08 12:42:40, Error [0x000000] Invalid Windows folder for offline gather to start - c:\windows[gle=0x00000003]
2014-06-08 12:42:40, Error [0x000000] Invalid Windows folder for offline gather to start - c:\windows[gle=0x00000003]
2014-06-08 12:42:40, Info [0x000000] Failed.[gle=0x00000006]
2014-06-08 12:42:40, Info [0x000000] Unable to find a valid Windows directory to proceed with requested offline operation;
Check if offline input file is present and has valid entries[gle=0x00000006]
2014-06-08 12:42:40, Info [0x000000] USMT Completed at 2014/06/08:12:42:40.357[gle=0x00000006]
2014-06-08 12:42:40, Info [0x000000] Entering MigShutdown method
2014-06-08 12:42:40, Info [0x000000] Leaving MigShutdown method

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...