JBudd 0 Posted July 15, 2020 Report post Posted July 15, 2020 I am running into an extremely odd issue. I have several task sequences that are failing to apply image during OSD. When I check the smstslog I see the following error "Failed to run the action: Apply Operating System. Error 255" I can find no mention of error 255 anywhere on the internet. When I check the status messages for the deployment ID I see the following: "The task sequence execution engine failed executing the action (Apply Operating System) in the group (Install Operating System) with the error code 255 Action output: ... Downloading file /SMS_DP_SMSPKG$/P0100051/sccm?/Windows%2010%202019%20LTSC_REF2020.wim range 6442450941-7214257158 Downloaded file from http://SVD-SCCM.WCPS.K12.VA.US:80/SMS_DP_SMSPKG$/P0100051/sccm?/Windows%2010%202019%20LTSC_REF2020.wim to C:\_SMSTaskSequence\Packages\P0100051\Windows 10 2019 LTSC_REF2020.wim VerifyContentHash: Hash algorithm is 32780 Content successfully downloaded at C:\_SMSTaskSequence\Packages\P0100051. Opening image file C:\_SMSTaskSequence\Packages\P0100051\Windows 10 2019 LTSC_REF2020.wim Image file P0100051 version "" will be applied Starting to apply image 1 from Windows 10 2019 LTSC_REF2020.wim to C:Wiping C:Set "C:\_SMSTaskSequence" to not be wiped Set "%OSDStateStorePath%" to not be wiped Set "%_SMSTSClientCache%" to not be wiped Set "%_SMSTSNewClientCachePathToCleanup%" to not be wiped Skipping C:\_SMSTaskSequence for wipe Calculating expected free space. Reporting deletion progress. Successfully wiped C:Applying image to C:Applying image 1. The operating system reported error 255: The extended attributes are inconsistent. I have tried redistributing the image and I still get the same issue. I was able to successfully deploy the image to a VM bu when I try on a physical PC I get the failure. I have tested on two different pieces of hardware. Thanks for the help! smsts.log Quote Share this post Link to post Share on other sites
JBudd 0 Posted July 15, 2020 Report post Posted July 15, 2020 It seems to be an issue with my boot image. I recently upgraded my boot images they were version 10.0.17763.1 I upgraded them to version 10.0.19041.1. If I replace the new boot image with the old one the task sequence runs fine. I'm guessing my new boot images must be missing a driver?? Quote Share this post Link to post Share on other sites