JLD Posted September 2, 2010 Report post Posted September 2, 2010 I have been trying to get a test system to boot with a PXE setup. Basics on the install: Windows 2008 R2 SCCM 2007 SP2 I have followed all of the instructions, and installed WDS without setting it up. Then installed the ConfigMgr PXE service point. I then opened the Operating System Deployment entry, went to Boot Images and updated the Distribution Points for both Boot image (x64) and Boot image (x86) to point to the SCCM 2007 server for both standard distribution and SMSPXEIMAGES$. At that point I verified that the folders were populated with the proper files. They are C:\RemoteInstall\SMSBoot\x64 abortpxe.com bootmgfw.efi bootmgr.exe pxeboot.com pxeboot.n12 wdsnbp.com C:\RemoteInstall\SMSBoot\x86 abortpxe.com bootmgr.exe pxeboot.com pxeboot.n12 wdsnbp.com The network helpers are present: pointing ot the server testserver.test.local and correct file for booting SMSBoot\x64\pxeboot.com The test computer boots ot the PXE loader, it checks out an IP address and starts the boot process. Looking at the log file: C:\Program Files (x86)\SMS_CCM\Logs\smspxe.log I see that it receives a connection and sends requested information. [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 15d3970 smspxe 9/2/2010 2:58:04 PM 2884 (0x0B44) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 14639b0 smspxe 9/2/2010 2:58:05 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 17ce570 smspxe 9/2/2010 2:58:07 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 120e8b0 smspxe 9/2/2010 2:58:09 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 17cd1f0 smspxe 9/2/2010 2:58:11 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 1365330 smspxe 9/2/2010 2:58:13 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 120d3b0 smspxe 9/2/2010 2:58:15 PM 2888 (0x0B48) [010.001.100.051:4011] Recv From:[159.087.125.004:68] Len:1024 1173d30 smspxe 9/2/2010 2:58:17 PM 2888 (0x0B48) Then on the PXE booting workstation, an ERROR is displayed Windows Boot MAnager (Server IP: 010.001.100.051) Windows Failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance File: \Boot\BCD Status: 0xc000000f Info: An error occurred while attempting to read the boot configuration data. ENTER=Continue ESC=Exit Quote Share this post Link to post Share on other sites More sharing options...
DizzleSizzle Posted September 2, 2010 Report post Posted September 2, 2010 i would first try changing your ip helper. you should use \SMSBoot\x86\wdsnbp.com rather than SMSBoot\x64\pxeboot.com. even if you are using x64 images you still need to use the x86. Quote Share this post Link to post Share on other sites More sharing options...
JLD Posted September 3, 2010 Report post Posted September 3, 2010 Gah, that seems to have solved part of the issue. Thanks very much! Quote Share this post Link to post Share on other sites More sharing options...
MotoRazr Posted May 23, 2011 Report post Posted May 23, 2011 Hi, I need your help. I'm having the following error when you deploy the OS via SCCM 2007. File: \ Boot \ BCD Status: 0xc000000f Info: An error occurred while Attempting to read the boot configuration date. smspxe.log (print screen) I need for help Tnks Quote Share this post Link to post Share on other sites More sharing options...
DMobley232 Posted March 22, 2013 Report post Posted March 22, 2013 What fixed it? Using IP Helper or \SMSBoot\x86\wdsnbp.com rather than SMSBoot\x64\pxeboot.com? Gah, that seems to have solved part of the issue.Thanks very much! Quote Share this post Link to post Share on other sites More sharing options...
