Jump to content


  • 0
Sarah

PXE Boot Problems

Question

I have been building machines using PXE boot and OSD then today it seems to have stopped working.

 

When I boot a machine, it PXE boots, assigns an IP address...

 

Then there is a message ... Details below show information relating to PXE boot requests. Please provide details to your WDS Administrator so that the request can be approved.

 

Request ID 3

Contacting Server x.x.x.x .................................................

 

... and the dots just carry on.

 

Any ideas what may have gone wrong here as it was working fine. I have tried 2 machines with the same result.

 

Also, are there any considerations when building an AMD machine over an Intel machine?

 

Thanks.

Share this post


Link to post
Share on other sites

Recommended Posts

  • 0

Tried the above and removed the duplicate.

 

Now back to original problem

 

Architecture x64

 

Then there is a message ... Details below show information relating to PXE boot requests. Please provide details to your WDS Administrator so that the request can be approved.

 

Request ID 3

Contacting Server x.x.x.x .................................................

 

... and the dots just carry on.

 

Is the computer is unknknown computer ? if so ,can you check if unknown computer collection has aatleast one Task sequences on it or not ?

 

Here are the some basic things to look into for PXE boot:

 

1.Unknown support should be enabled in SCCM PXe point Role

2.Unknown computer support in WDS server should be checked and check the DHCP authrisation in Advanced tab.

3.If WDS and DHCP server are not in same server then port 60,67 should be configured in DHCP

4.Boot images(X86 and X64) should be distributed to Standard DP and PXE DP

5.Atleast one Task Sequence should be advertised to All Unknown computers.

Share this post


Link to post
Share on other sites

  • 0

This is a known computer as I have imported it using the mac address.

 

Just looked in the smspxe.log and have the following errrors:

 

================= PXE Provider loaded. ===================== smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Init Policy Provider settings smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Machine is running Windows Longhorn. (NTVersion=0X600, ServicePack=2) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Reloading PXE Provider Settings. cached=0 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Loaded PXE settings from reg key HKLM\Software\Microsoft\SMS\Identification:

SMS Site Settings:

Server: SCCM01

SiteCode: MCC

Parent SiteCode: <empty>

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Cannot read the registry value of MACIgnoreListFile (80070002) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Loaded PXE settings from reg key HKLM\Software\Microsoft\SMS\PXE:

PXE Settings:

IsActive: Yes

SupportUnknownMachines: No

MACIgnoreListFile: <empty>

ResponseDelay: 0

CacheExpire: 3600

HTTP Port: 80

HTTPS Port: 443

IISSSLState: 0x0

BindPolicy: Exclude <empty>

TRK: <non empty>

SiteSignCert: <empty>

Root CA Certs: <empty>

PXE GUID: 5ad01018-84b5-44be-bd55-31ffea5f425c

PXEPassword: <empty>

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Loaded TFTP settings from reg key HKLM\System\CurrentControlSet\Services\WDSSERVER\Providers\WDSTFTP:

TFTP Settings:

Directory: z:\RemoteInstall

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

MAC Ignore List Filename in registry is empty smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Loaded Database settings from reg key HKLM\Software\Microsoft\SMS\PXE:

Database Settings:

Server: SCCM01

Database: SMS_MCC

User: <empty>

Password: <empty>

Use Integrated Security: No

Impersonation Required: No

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

PXE Provider Settings Changed smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Querying Database for Cert with GUID: 5ad01018-84b5-44be-bd55-31ffea5f425c smspxe 27/09/2010 11:41:38 6124 (0x17EC)

inside GetPxeCert SmsPXE 27/09/2010 11:41:38 6124 (0x17EC)

Executing PxeGetCert(5ad01018-84b5-44be-bd55-31ffea5f425c) SmsPXE 27/09/2010 11:41:38 6124 (0x17EC)

CDatabaseProxy :: GetPxeCert succeeded: 5ad01018-84b5-44be-bd55-31ffea5f425c \\SCCM01 <non empty> SmsPXE 27/09/2010 11:41:38 6124 (0x17EC)

Loaded PXE settings from DB: PXE Cert: <non empty>

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Site Code: (null), Parent Site Code: MCC smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Executing PXE_GetSiteTypeAndDefaultMP(MCC) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

GetSiteTypeAndDefaultMP: SiteType=2 DefaultMP=SCCM01.MONMOUTHSHIRE.GOV.UK smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Site Type: 2 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

GetUnknownMachineResource (MCC,x86): smspxe 27/09/2010 11:41:38 6124 (0x17EC)

GetUnknownMachineResource: a4b75342-263c-4466-9f38-caded0e5f671, 4112 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

GetUnknownMachineResource (MCC,x64): smspxe 27/09/2010 11:41:38 6124 (0x17EC)

GetUnknownMachineResource: 66f35160-07d5-4259-9c69-57a9822c08a1, 4113 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Loaded PXE settings from DB: Unknown machine GUIDs: (x86) a4b75342-263c-4466-9f38-caded0e5f671, (x64) 66f35160-07d5-4259-9c69-57a9822c08a1 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Initializing PXEPerfObject. smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Executing LookupDevice(, 00:00:00:00:00:00) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

CDatabaseProxy :: LookupDevice succeeded: 0 0 0 0 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Failed to read PXE settings.

The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Failed to read PXE settings.

The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Found new image SMSPKG\MCC00001 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Unable to open the image file (0x8007000D) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Unable to open image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim.

The data is invalid. (Error: 8007000D; Source: Windows) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

The data is invalid. (Error: 8007000D; Source: Windows) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Found new image SMSPKG\MCC00002 smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00002\boot.MCC00002.wim smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Failed to read PXE settings.

The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Found Image file: z:\RemoteInstall\SMSImages\SMSPKG\MCC00002\boot.MCC00002.wim

PackageID: SMSPKG\MCC00002

ProductName: Microsoft® Windows® Operating System

Architecture: 9

Description: Microsoft Windows PE (x64)

Version:

Creator:

SystemDir: WINDOWS

smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00002\boot.MCC00002.wim smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Mutex was not owned. Now have ownership. smspxe 27/09/2010 11:41:38 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00002\boot.MCC00002.wim smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Applying image 1 to volume C:\Windows\TEMP\PXEBootFiles smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00002\boot.MCC00002.wim smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Found new image SMSPKG\Restore smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001 (old).wim smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Failed to read PXE settings.

The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Found Image file: z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001 (old).wim

PackageID: SMSPKG\Restore

ProductName: Microsoft® Windows® Operating System

Architecture: 0

Description: Microsoft Windows PE (x86)

Version:

Creator:

SystemDir: WINDOWS

smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001 (old).wim smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Mutex was not owned. Now have ownership. smspxe 27/09/2010 11:41:40 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001 (old).wim smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Applying image 1 to volume C:\Windows\TEMP\PXEBootFiles smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001 (old).wim smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Boot image SMSPKG\Restore has changed since added smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001.wim smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Failed to read PXE settings.

The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Found Image file: z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001.wim

PackageID: SMSPKG\Restore

ProductName: Microsoft® Windows® Operating System

Architecture: 0

Description: Microsoft Windows PE (x86)

Version:

Creator:

SystemDir: WINDOWS

smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001.wim smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Mutex was not owned. Now have ownership. smspxe 27/09/2010 11:41:41 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001.wim smspxe 27/09/2010 11:41:42 6124 (0x17EC)

Applying image 1 to volume C:\Windows\TEMP\PXEBootFiles smspxe 27/09/2010 11:41:42 6124 (0x17EC)

Closing image file z:\RemoteInstall\SMSImages\SMSPKG\Restore\winpe.MCC00001.wim smspxe 27/09/2010 11:41:43 6124 (0x17EC)

PXE Provider finished loading. smspxe 27/09/2010 11:41:43 6124 (0x17EC)

Opening image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim smspxe 27/09/2010 11:43:42 5032 (0x13A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e63054 smspxe 27/09/2010 11:44:45 4776 (0x12A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6406c smspxe 27/09/2010 11:44:49 4776 (0x12A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e65084 smspxe 27/09/2010 11:44:53 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:44:53 3980 (0x0F8C)

======================================= smspxe 27/09/2010 11:44:53 3980 (0x0F8C)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:44:53 3980 (0x0F8C)

=======================================

smspxe 27/09/2010 11:44:53 3980 (0x0F8C)

Mp RaiseDBFailureStatusMessage: could not raise status message. smspxe 27/09/2010 11:44:53 3980 (0x0F8C)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:44:54 3980 (0x0F8C)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6609c smspxe 27/09/2010 11:44:57 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:44:57 3980 (0x0F8C)

======================================= smspxe 27/09/2010 11:44:57 3980 (0x0F8C)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:44:57 3980 (0x0F8C)

=======================================

smspxe 27/09/2010 11:44:57 3980 (0x0F8C)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:44:57 3980 (0x0F8C)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x80004005 smspxe 27/09/2010 11:44:58 5768 (0x1688)

======================================= smspxe 27/09/2010 11:44:58 5768 (0x1688)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x80004005

Error Description : null

OLEDB IID : {0C733A8B-2A1C-11CE-ADE5-00AA0044773D}

ProgID : Microsoft OLE DB Provider for SQL Server

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:44:58 5768 (0x1688)

=======================================

smspxe 27/09/2010 11:44:58 5768 (0x1688)

PXE Provider failed to process message.

Unspecified error (Error: 80004005; Source: Windows) smspxe 27/09/2010 11:44:58 5768 (0x1688)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e670b4 smspxe 27/09/2010 11:45:01 4776 (0x12A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e680cc smspxe 27/09/2010 11:45:05 4776 (0x12A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e690e4 smspxe 27/09/2010 11:45:09 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x80004005 smspxe 27/09/2010 11:45:09 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:09 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x80004005

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:09 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:09 1896 (0x0768)

PXE Provider failed to process message.

Unspecified error (Error: 80004005; Source: Windows) smspxe 27/09/2010 11:45:09 1896 (0x0768)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6a0fc smspxe 27/09/2010 11:45:13 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:13 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:13 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:13 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:13 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:13 1896 (0x0768)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6b114 smspxe 27/09/2010 11:45:17 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:17 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:17 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:17 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:17 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:17 1896 (0x0768)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6c12c smspxe 27/09/2010 11:45:21 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:21 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:21 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:21 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:21 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:21 1896 (0x0768)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6d144 smspxe 27/09/2010 11:45:25 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:25 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:25 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:25 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:25 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:25 1896 (0x0768)

Unable to open the image file (0x8007000D) smspxe 27/09/2010 11:45:27 5032 (0x13A8)

Unable to open image file z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim.

The data is invalid. (Error: 8007000D; Source: Windows) smspxe 27/09/2010 11:45:27 5032 (0x13A8)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

The data is invalid. (Error: 8007000D; Source: Windows) smspxe 27/09/2010 11:45:27 5032 (0x13A8)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6e15c smspxe 27/09/2010 11:45:29 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:29 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:29 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:29 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:29 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:29 1896 (0x0768)

[010.003.001.048:67] Recv From:[000.000.000.000:68] Len:548 1e6f174 smspxe 27/09/2010 11:45:33 4776 (0x12A8)

CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x8007000E smspxe 27/09/2010 11:45:33 1896 (0x0768)

======================================= smspxe 27/09/2010 11:45:33 1896 (0x0768)

 

MPDB ERROR - CONNECTION PARAMETERS

SQL Server Name : SCCM01

SQL Database Name : SMS_MCC

Integrated Auth : True

 

MPDB ERROR - EXTENDED INFORMATION

MPDB Method : Init()

MPDB Method HRESULT : 0x8007000E

Error Description : null

OLEDB IID : null

ProgID : null

 

MPDB ERROR - INFORMATION FROM DRIVER

null smspxe 27/09/2010 11:45:33 1896 (0x0768)

=======================================

smspxe 27/09/2010 11:45:33 1896 (0x0768)

PXE Provider failed to process message.

Not enough storage is available to complete this operation. (Error: 8007000E; Source: Windows) smspxe 27/09/2010 11:45:33 1896 (0x0768)

Executing LookupDevice(25E865FB-15F8-11E0-9406-8A017F195894, 1C:C1:DE:9B:41:FF) smspxe 27/09/2010 11:45:37 3980 (0x0F8C)

Executing LookupDevice(25E865FB-15F8-11E0-9406-8A017F195894, 1C:C1:DE:9B:41:FF) smspxe 27/09/2010 11:45:37 5768 (0x1688)

CDatabaseProxy :: LookupDevice succeeded: 0 0 4150 1 smspxe 27/09/2010 11:45:37 3980 (0x0F8C)

MAC=1C:C1:DE:9B:41:FF SMBIOS GUID=25E865FB-15F8-11E0-9406-8A017F195894 > Device found in the database. MacCount=1 GuidCount=0 smspxe 27/09/2010 11:45:37 3980 (0x0F8C)

CDatabaseProxy :: LookupDevice succeeded: 0 0 4150 1 smspxe 27/09/2010 11:45:37 5768 (0x1688)

MAC=1C:C1:DE:9B:41:FF SMBIOS GUID=25E865FB-15F8-11E0-9406-8A017F195894 > Device found in the database. MacCount=1 GuidCount=0 smspxe 27/09/2010 11:45:37 5768 (0x1688)

Executing LookupDevice(25E865FB-15F8-11E0-9406-8A017F195894, 1C:C1:DE:9B:41:FF) smspxe 27/09/2010 11:45:37 6084 (0x17C4)

CDatabaseProxy :: LookupDevice succeeded: 0 0 4150 1 smspxe 27/09/2010 11:45:37 6084 (0x17C4)

MAC=1C:C1:DE:9B:41:FF SMBIOS GUID=25E865FB-15F8-11E0-9406-8A017F195894 > Device found in the database. MacCount=1 GuidCount=0 smspxe 27/09/2010 11:45:37 6084 (0x17C4)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 209ffe4 smspxe 27/09/2010 11:45:47 2592 (0x0A20)

Executing LookupDevice(46746E94-D140-497A-8C46-5463A8F006FD, FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF) smspxe 27/09/2010 11:45:47 6084 (0x17C4)

CDatabaseProxy :: LookupDevice succeeded: 0 0 0 0 smspxe 27/09/2010 11:45:47 6084 (0x17C4)

MAC=FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF SMBIOS GUID=46746E94-D140-497A-8C46-5463A8F006FD > Device not found in the database. smspxe 27/09/2010 11:45:47 6084 (0x17C4)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:47:27 3156 (0x0C54)

WimFile preload failed smspxe 27/09/2010 11:47:27 3156 (0x0C54)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:47:27 3156 (0x0C54)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:49:27 4780 (0x12AC)

WimFile preload failed smspxe 27/09/2010 11:49:27 4780 (0x12AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:49:27 4780 (0x12AC)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 20a10ec smspxe 27/09/2010 11:50:46 2592 (0x0A20)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:51:26 6028 (0x178C)

WimFile preload failed smspxe 27/09/2010 11:51:26 6028 (0x178C)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:51:26 6028 (0x178C)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:53:26 4596 (0x11F4)

WimFile preload failed smspxe 27/09/2010 11:53:26 4596 (0x11F4)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:53:26 4596 (0x11F4)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:55:26 4016 (0x0FB0)

WimFile preload failed smspxe 27/09/2010 11:55:26 4016 (0x0FB0)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:55:26 4016 (0x0FB0)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 20a21f4 smspxe 27/09/2010 11:55:46 2592 (0x0A20)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:57:26 1944 (0x0798)

WimFile preload failed smspxe 27/09/2010 11:57:26 1944 (0x0798)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:57:26 1944 (0x0798)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:59:26 4980 (0x1374)

WimFile preload failed smspxe 27/09/2010 11:59:26 4980 (0x1374)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:59:26 4980 (0x1374)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 20a32fc smspxe 27/09/2010 12:00:46 2592 (0x0A20)

Share this post


Link to post
Share on other sites

  • 0

Did you check the storage space also verify that,the MAC you have imported is correct or not and TS is advertised to the collection in which the new computer (MAC ID) added?

BTW ,if you have R2 Installed,Are you not using the built in method to deploy OS to unknown computers ?

 

Are you using Vmware or Physical ? if VMware,Try to remove the netcard from your vmware machine and then add it again[

 

 

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 27/09/2010 11:57:26 1944 (0x0798)


Share this post


Link to post
Share on other sites

  • 0

Physical hardware.

 

Storage space is fine, MAC is fine and task sequence is advertised to collection OK. This has all previously been tested so not sure why this hiccup at the moment.

 

The storage is using ISCSI on a NetApp though.

 

Was not aware of R2 feature for unknown computers. Not sure we want to enable this as it could cause us problems if workstations were built accidentally.

Share this post


Link to post
Share on other sites

  • 0

Having these errors in smspxe.log

 

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:29:16 5036 (0x13AC)

WimFile preload failed smspxe 28/09/2010 09:29:16 5036 (0x13AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:29:16 5036 (0x13AC)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:31:16 5036 (0x13AC)

WimFile preload failed smspxe 28/09/2010 09:31:16 5036 (0x13AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:31:16 5036 (0x13AC)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:33:16 5036 (0x13AC)

WimFile preload failed smspxe 28/09/2010 09:33:16 5036 (0x13AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:33:16 5036 (0x13AC)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 282769c smspxe 28/09/2010 09:33:28 3220 (0x0C94)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:35:16 5036 (0x13AC)

WimFile preload failed smspxe 28/09/2010 09:35:16 5036 (0x13AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:35:16 5036 (0x13AC)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:37:15 5036 (0x13AC)

WimFile preload failed smspxe 28/09/2010 09:37:15 5036 (0x13AC)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:37:15 5036 (0x13AC)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 28287a4 smspxe 28/09/2010 09:38:28 3220 (0x0C94)

Executing LookupDevice(46746E94-D140-497A-8C46-5463A8F006FD, FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF) smspxe 28/09/2010 09:38:28 4536 (0x11B8)

CDatabaseProxy :: LookupDevice succeeded: 0 0 0 0 smspxe 28/09/2010 09:38:28 4536 (0x11B8)

MAC=FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF SMBIOS GUID=46746E94-D140-497A-8C46-5463A8F006FD > Device not found in the database. smspxe 28/09/2010 09:38:28 4536 (0x11B8)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:39:15 4884 (0x1314)

WimFile preload failed smspxe 28/09/2010 09:39:15 4884 (0x1314)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:39:15 4884 (0x1314)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:41:15 4884 (0x1314)

WimFile preload failed smspxe 28/09/2010 09:41:15 4884 (0x1314)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:41:15 4884 (0x1314)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:43:15 4884 (0x1314)

WimFile preload failed smspxe 28/09/2010 09:43:15 4884 (0x1314)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:43:15 4884 (0x1314)

[010.003.001.048:4011] Recv From:[010.003.001.048:9000] Len:274 28298ac smspxe 28/09/2010 09:43:28 3220 (0x0C94)

Unable to load C:\Windows\system32\msi.dll.

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:45:15 4884 (0x1314)

WimFile preload failed smspxe 28/09/2010 09:45:15 4884 (0x1314)

Failed query WIM at z:\RemoteInstall\SMSImages\SMSPKG\MCC00001\winpe.MCC00001.wim for information..

Not enough storage is available to process this command. (Error: 80070008; Source: Windows) smspxe 28/09/2010 09:45:15 4884 (0x1314)

 

 

 

Any ideas? Can I delete the Distribution Point and readd? Is there a preferred way to do this?

Share this post


Link to post
Share on other sites

  • 0

OK. Have removed from Distribution Point and readded it but with no resolution.

 

Any further ideas?

 

 

The Issue is not with Distribution Point. There should be something behind the WDS and PXE service point Role.You can remove PXE role and re add it again and see if that works.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.