Jump to content


anyweb

using SCCM 2012 in a LAB - Part 4. Configuring Client Settings and adding roles

Recommended Posts

Thanks to windows noob for making some great resources for sccm for a noob like me!

 

I have a client install question. To my knowledge I followed the client deployment directions exactly. I ran the install wizard, and the two other servers in my test lab (Domain controllers) recieved the client without a problem, just as the tutorial said. I had also previously installed two computers in the test lab, one running Windows xp and another running Windows 7. Neither of these machines recieved the client. I feel like I have exhausted various forums, checking issues such as firewall permissions, etc.

 

What would you suggest I check next?

 

Would this perhaps be a boundary groups issue?

Share this post


Link to post
Share on other sites

check the following:-

 

1. firewall, disabled it as a test on the client.

2. clientinstall account, verify its a member of the Local Administrators group on the client

3. if the above don't help then verify that the boundary group references tab has the site code checked

4. verify the clientinstall password is correctly specified in client push

 

cheers

niall

Share this post


Link to post
Share on other sites

Hello Niall, I have done as you suggested in numbers 1-4 above. I still do not see a Yes in the client column under devices for either of the user machines. After running the client install wizard I also carefully watched the task manager on the client machines for the client install process to run and did not see it. What else should I check? Thank you for your help.

Share this post


Link to post
Share on other sites

verify DNS, on any of the clients do nslookup.

can you ping the fqdn of the Configmgr server ? and vice versa to the clients ?

 

tell me exactly what steps you are taking to deploy the client ?

Share this post


Link to post
Share on other sites

DNS is correct on both machines.

 

I can ping the fqdn back and forth between the client machine and server

 

To deploy the client I am going to assets and compliance- devices- right clicking the device and choosing "install client" -next- check all three boxes verify my site, next and next to close at the summary screen that says "success..."

 

One note of interest...the virtual machines that are not receiving the client are in a different data store.

Share this post


Link to post
Share on other sites

I am having HPPT error 401.1 - Unauthorized - You do not have permission to view this directory or page using this credentials that you supplied.

Other details are as follows:

Module - WindowsAuthenticationModule

Requested URL - http://sccm2012SPAM!...licationcatalog

Physical Path - c:\program files\SMS_CCM\CMapplicationcatalog

Log on Method - Not yet determined

Logon User - Not yet determined

Error Code - 0x8009030e

 

The client push install is working fine. Just want to find out how to resolve http error where, I want to go in and look for successful install (GREEN)

 

I tried administrator and clientinstall account to login to hppt://sccm2012......... - Yet same error.

 

IGNORE ABOVE MESSAGE - A SIMPLE SERVER REBOOT FIXED THE ISSUE.

Share this post


Link to post
Share on other sites

Hello everyone!

@anyweb : Great tutorials :)

 

I have a problem with the application server. I get the message:

Cannot connect to the application server.

The website cannot communicate with the server. This might be a temporary problem. Try again later to see if the problem has been corrected. If this problem continues, contact your help desk.

 

I checked the permissions, I checked the IIS and everything seems to be ok ... any suggestions how to fix this ?

 

Thanks!

Emilian

Share this post


Link to post
Share on other sites

Hello,

I have a problem when installing client. See logs on all machine:

 

 

MP 'SCCM.aqua.test' didn't return DP locations for client package with the expected version. Retrying in 30 minutes. ccmsetup 08/03/2012 15:43:56 1052 (0x041C)

 

Extended AD schema Ok

Package on endpoint

 

I don't understand where is my mistake.

 

Thanks

David

Share this post


Link to post
Share on other sites

New to SCCM, only just started with CM2012 RC (Build 7700)

 

I too have the same issue with the Software Center/Application Catalog.

 

I enabled WCF Activation as per an earlier post, plus rebooted the server, update the agents, etc and now the webpage just repeately scrolls between website found and redirecting, then eventually fails with an IIS error.

 

I have tried removing both Application Catalog site roles and running the cmd line for .net 4 - this does nothing.

 

Any help would be great appreciated.

Share this post


Link to post
Share on other sites

Here entire log :

<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="16:17:25.866-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="lsad.cpp:601">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="16:17:25.867-60" date="03-08-2012" component="LocationServices" context="" type="0" thread="1052" file="lsad.cpp:556">
<![LOG[Current AD forest name is aqua.test, domain name is aqua.test]LOG]!><time="16:17:25.867-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="lsad.cpp:668">
<![LOG[DHCP entry points already initialized.]LOG]!><time="16:17:25.867-60" date="03-08-2012" component="LocationServices" context="" type="0" thread="1052" file="ccmiputil.cpp:75">
<![LOG[begin checking Alternate Network Configuration]LOG]!><time="16:17:25.867-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="ccmiputil.cpp:1069">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="16:17:25.877-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="ccmiputil.cpp:1146">
<![LOG[sending message body '<ContentLocationRequest SchemaVersion="1.00">
 <ClientPackage/>
 <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="aqua.test"/>
<Domain Name="aqua.test"/>
<IPAddresses>
<IPAddress SubnetAddress="192.168.1.0" Address="192.168.1.2"/>
</IPAddresses>
 </ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="16:17:25.881-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2205">
<![LOG[sending message header '<Msg SchemaVersion="1.1"><ID>{9B0DFDF4-AE92-4C30-AF83-E89B431ED645}</ID><SourceHost>SCCM</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SCCM:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.aqua.test</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2012-03-08T15:17:25Z</SentTime><Body Type="ByteRange" Offset="0" Length="1044"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:17:25.882-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2286">
<![LOG[CCM_POST 'HTTP://SCCM.aqua.test/ccm_system/request']LOG]!><time="16:17:25.882-60" date="03-08-2012" component="ccmsetup" context="" type="1" thread="1052" file="httphelper.cpp:802">
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="16:17:25.919-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="httphelper.cpp:1959">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{B27CF1E3-1A27-48A5-ABA7-DA6A2D599114}</ID>
<SourceID>GUID:E071FE6A-A14C-4706-9165-578D8FF08138</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:SCCM:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>SCCM</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2012-03-08T15:17:25Z</SentTime><Body Type="ByteRange" Offset="0" Length="862"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">SCCM;SCCM.aqua.test;</Property><Property Name="MPSiteCode">00A</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:17:25.919-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="httphelper.cpp:1719">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""/><Sites><Site><MPSite SiteCode="00A" MasterSiteCode="00A" SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="00A00001" FullPackageVersion="4" FullPackageHash="69BA54C174912C4E8BA7714749C90CA2919CD537DAE5AAAC0ECAF22503E1A72C" MinimumClientVersion="5.0.7703.0"/></ContentLocationReply>']LOG]!><time="16:17:25.920-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2327">
<![LOG[MP 'SCCM.aqua.test' didn't return DP locations for client package with the expected version. Retrying in 30 minutes.]LOG]!><time="16:17:25.920-60" date="03-08-2012" component="ccmsetup" context="" type="2" thread="1052" file="ccmsetup.cpp:9604">
<![LOG[Next retry in 30 minute(s)...]LOG]!><time="16:17:25.920-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="ccmsetup.cpp:7554">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="16:44:58.399-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="lsad.cpp:601">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="16:44:58.399-60" date="03-08-2012" component="LocationServices" context="" type="0" thread="1052" file="lsad.cpp:556">
<![LOG[Current AD forest name is aqua.test, domain name is aqua.test]LOG]!><time="16:44:58.399-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="lsad.cpp:668">
<![LOG[DHCP entry points already initialized.]LOG]!><time="16:44:58.399-60" date="03-08-2012" component="LocationServices" context="" type="0" thread="1052" file="ccmiputil.cpp:75">
<![LOG[begin checking Alternate Network Configuration]LOG]!><time="16:44:58.399-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="ccmiputil.cpp:1069">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="16:44:58.408-60" date="03-08-2012" component="LocationServices" context="" type="1" thread="1052" file="ccmiputil.cpp:1146">
<![LOG[sending message body '<ContentLocationRequest SchemaVersion="1.00">
 <ClientPackage/>
 <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="aqua.test"/>
<Domain Name="aqua.test"/>
<IPAddresses>
<IPAddress SubnetAddress="192.168.1.0" Address="192.168.1.2"/>
</IPAddresses>
 </ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="16:44:58.413-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2205">
<![LOG[sending message header '<Msg SchemaVersion="1.1"><ID>{A7770976-D133-4179-8461-77FF87E0810C}</ID><SourceHost>SCCM</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SCCM:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.aqua.test</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2012-03-08T15:44:58Z</SentTime><Body Type="ByteRange" Offset="0" Length="1044"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:44:58.413-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2286">
<![LOG[CCM_POST 'HTTP://SCCM.aqua.test/ccm_system/request']LOG]!><time="16:44:58.414-60" date="03-08-2012" component="ccmsetup" context="" type="1" thread="1052" file="httphelper.cpp:802">
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="16:44:58.513-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="httphelper.cpp:1959">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{1FFCACCD-ACB9-40A2-BB6D-B3ED06BA1F1A}</ID>
<SourceID>GUID:E071FE6A-A14C-4706-9165-578D8FF08138</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:SCCM:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>SCCM</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2012-03-08T15:44:58Z</SentTime><Body Type="ByteRange" Offset="0" Length="862"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082018C06092A864886F70D010702A082017D30820179020101310B300906052B0E03021A0500300B06092A864886F70D01070131820158308201540201013031301D310D300B060355040313045343434D310C300A06035504031303534D5302107A738F5EE7EEC9894EA6617C859C25D2300906052B0E03021A0500300D06092A864886F70D01010105000482010082C2030F1BA14EC549C6D7356BE991C2C374F3854AA7369B58B937543B5EE29571B3F9801AF58652E6FE74A0957F3556DCB93413C83B9B610514DE8D25C2EEDB09371AE54E5D04A84960EFB34A5A705C1A544986981A4D2E03E74C60E6A29D27A71CE7B572FA6054E23D68EBE64575F57757285D6619EB75A6D5A3BFDA852A445F771620C817F4E52FF24032C5333F8498888E0A8D868A7F7C0CC54EB92B5B8266EF789B7C05A8B2ACA3C09DF2401E6E9BDD88CC6B51D170C084F7EC01B094B2665662255D96E64A9011D7214F9E3E6FF3E98521C8BAD565A54B7E8AD9780AAA76BEC9C46E0C3AA66C4F1D2F0D51A32EB8EF010560E0509B0C3B0CD11632AFE6</Property><Property Name="AuthSenderMachine">SCCM;SCCM.aqua.test;</Property><Property Name="MPSiteCode">00A</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:44:58.515-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="httphelper.cpp:1719">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""/><Sites><Site><MPSite SiteCode="00A" MasterSiteCode="00A" SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="00A00001" FullPackageVersion="4" FullPackageHash="69BA54C174912C4E8BA7714749C90CA2919CD537DAE5AAAC0ECAF22503E1A72C" MinimumClientVersion="5.0.7703.0"/></ContentLocationReply>']LOG]!><time="16:44:58.517-60" date="03-08-2012" component="ccmsetup" context="" type="0" thread="1052" file="util.cpp:2327">
<![LOG[MP 'SCCM.aqua.test' didn't return DP locations for client package with the expected version. Retrying in 30 minutes.]LOG]!><time="16:44:58.517-60" date="03-08-2012" component="ccmsetup" context="" type="2" thread="1052" file="ccmsetup.cpp:9604">

Share this post


Link to post
Share on other sites

Well i am having the same issue with client not installing. But before i start installing .net 4 and installclient to the local admin and if that does not work disable wire.....I would like to know what logs do you guys look at? CCMSetup.Log has to be on the client, or the server. I cant find anything related to sccm on the client.

 

Thank you,

Share this post


Link to post
Share on other sites

did you follow the guide exactly as it is ? if so you won't have issues.

verify that the installation account for the clientinstall is a member of the local administrators group

try disabling the firewall to see if that helps

the ccmsetup.log will be present on the computer you are installing the client on

Share this post


Link to post
Share on other sites

I was only able to came back to my lab today. Everything is fine and my windows 7 does have a client installed.

I do have question, say i missed adding clientinstall account to the local admin "this is doen via GPO" and server is not able to start the push of the client.

Will it still generate ccmsetup.log on the client?

 

Thank you for your work.

Share this post


Link to post
Share on other sites

when going through the deployment i was wondering about the CAS. now if i have a CAS and 2 primary, would i install the sccm client from one of the primaries? or just leave it without a client. i am trying to figure this out before we hit production soon.

Share this post


Link to post
Share on other sites

where are you planning on installing the client ? i'm not following your train of thought exactly... you can't install the client from the CAS because it doesn't manage clients, you can only install it from your primary sites.

Share this post


Link to post
Share on other sites

I am not able to install the client to DC.

and getting the following in the ccmsetup.log:

GetDPLocations failed with error 0x80072ee7 ccmsetup

Failed to get DP locations as the expected version from MP 'SCCM-RC.server2008r2.lab.local'. Error 0x80072ee7 ccmsetup (0x0FC8)

ClientInstall is a local admin.

firewall is off.

Not sure what i need to check?>

Thank you,

Share this post


Link to post
Share on other sites

I appear to be having a similar issue!

 

 

Windows 2008 R2 SP1 + +SQL 2008 R2 SP1 U4 + SCCM 2012 RC (v 5.0.7703.0)

Problem install client on some Windows XP SP3:

Some computers can not install the client with error:

<![LOG[Failed to get DP locations as the expected version from MP 'sccm2012.domain.ru'. Error 0x0]LOG]!><time="15:56:40.114-420" date="03-21-2012" component="ccmsetup" context="" type="2" thread="2824" file="ccmsetup.cpp:9542">

 

DP is included in the boundary group "General".

The foolowing boundaries are members of General boundary group: Default-First-Site-Name and domain.ru/Default-First-Site-Name/192.168.3.0/24

Clients also are included in these boundaries: Default-First-Site-Name and domain.ru/Default-First-Site-Name/192.168.3.0/24

 

On most clients established client SCCM. Only SOME are not established. They have the same domain, the same ip network, the same server SCCM. Hence the problem on the client. The question is how to troubleshoot it?

How to resolve?

 

It my post on Microsoft: http://innovation.co...x?ThreadId=6027

Share this post


Link to post
Share on other sites

Hi

 

having the 404 issues as well with my SCCM install

 

now it appears that the CMApplicationCatalog folder for IIS is not being created hence the 404 reference

 

soai60.png

 

I have reinstalled the Application services and also tried the ASP. Net 4 enable command and still hasnt fixed it, im now out of ideas as i have followed all parts of the tutorial to this point

 

Here is the IIS Structure

 

1zn8uqa.png

 

 

It appears that even though i have the components installed i have no trace of logs or components in the system itself

 

 

Troubleshooting your Application Catalog

If your test is not successful, check the status messages for the following components - (does not exist in Administration > Monitoring > Component Status)

  • SMS_PORTALWEB_CONTROL_MANAGER
  • SMS_AWEBSVC_CONTROL_MANAGER

You can also check the following logs - (does not exist anywhere on the machine)

  • SMSAWEBSVCSetup.log
  • SMSPORTALWEBSetup.log
  • awebsvcMSI.log
  • portlwebMSI.log

 

 

 

EDIT: sorted it out had to run the commands in the log files manually after the services were removed so i could readd them

Share this post


Link to post
Share on other sites

I'm getting a 404 error too for the CMApplicationCatalog too. What did you do to fix this? I've uninstalled both Application roles and reinstalled them. Can someone help me out?

 

Solved my own problem, had to reactivate .NET framework http://blogg.alltomdeployment.se/2011/11/404-error-server-error-on-cmapplicationcatalog-sccm-2012/

Share this post


Link to post
Share on other sites

I got the clients installed via client push but 3/4 of the systems don't have a site code when you open configuration manager icon in control panel. Using "configure Settings" under the "site" tab, then "find site"- fails with "Configuration Manager did not find a site to manage this client"

 

Schema is extended on the test environment. Clients show the correct site code in the sccm console but "NO" for "client"

 

Please advise

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...