Jump to content


anyweb

using SCCM 2012 RC in a LAB - Part 10. Using Prestart and Extrafiles to get more out of UDA

Recommended Posts

i didnt see any reference to UDA in your smsts.log file, check again, verify it's being set in your task sequence like i've specified in the guide ok ?

Share this post


Link to post
Share on other sites

In Part 9, I deployed the PXE on the second VM. Was stuck on the PXE not progressing to the F12 button. I went back thru all the steps in Part 9 and it finally worked.

Readin Part 10, I went and deleted that VM from SCCM, redid the import to that Deploy Group, but am still getting just the PXE not progressing to the point that I can press F12.

 

Any ideas?

Share this post


Link to post
Share on other sites

This is what repeats in the SMSPXE.log:

 

Set media certificate in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

PXE::CBootImageManager::FindMatchingArchitectureBootImage SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set media certificate in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777239" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>

SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Client Identity: {38B78A4C-E32A-4DA9-A26B-E317B43F895D} SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

 

Seems like the Client ID is missing.

 

DISREGARD THIS.

Share this post


Link to post
Share on other sites

After being able to redo the PXE I ran into a few issues. I was unable to press the F8 key to copy the CMTrace program over during the installation. Upon completed and going to the My Devices section, the message I received stated: This setting cannot be configured because of a network communications or a configuration problem.

Once the system completed the installation and I logged in, I copied the CMTrace program to the root of the C:\ drive. Browsing to the C:\Windows\CCM\Logs directory, there is no log titled AppEnforce.log. The first log is titled CAS.log Firefox is not installed either.

 

Share this post


Link to post
Share on other sites

Hello,

 

Just after enter the username, I get this message:

120405113847789180.jpg

I press "OK" the message disappears, then I can't do nothing!

When I press "NEXT" on the "Welcome to the task sequence wizard" nothing happens.

I don't why, do you've an idea?

 

Thank's in advance.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.