Jump to content


Recommended Posts

When i try to pxe boot a client, i only get PXE-E53 "No boot filename received"

 

I have tried to reinstall wds/pxe several times.. searched trough a lot of post with similar problems..tried lot of solutions.. but still stuck..

I really dont know where to begin to troubleshoot this..

 

SMSPXE:

 

reply has no message header marker SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

PXE::DB_LookupDevice failed; 0x80004005 SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Set enterpirse certificate in transport SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Set media certificate in transport SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Set authenticator in transport SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

In SSL, but with no client cert SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Set authenticator in transport SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

In SSL, but with no client cert SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

reply has no message header marker SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Failed to send status message (80004005) SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

Failed to send the status message SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

PXE::DB_ReportStatus failed; 0x80004005 SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

PXE Provider failed to process message.

Unspecified error (Error: 80004005; Source: Windows) SMSPXE 27.04.2012 12:36:19 3936 (0x0F60)

 

 

 

Edit: also tried to add option 66/67 in dhcp.. i get past the pxe boot.. but recieve a \boot\bcd error

And the same lines of errors in SMSPXE

post-11792-0-27642300-1335436344_thumb.jpg

Share this post


Link to post
Share on other sites

I have the same issue. SCCM 2007 works great. I installed SCCM 2012 and a new server R2. Did a site by site migration and got everything moved over.

 

SCCM 2012 Site is the DP, MP, State Migration. I want to be able to pxe boot my images. I get the same error.

 

If I configure WDS I get the \boot\bcd error.

 

So what i have done is uninstall WDS and deleted the DP

couple reboots later

I install WDS and do nothing to it.

I add the DP back to the site server.

I then added PXE to it.

I can see that my server under WDS is not configured.

the REMIST folder is showing up

The WDS service is running.

 

I also have images in the right folder

 

E:\RemoteInstall\SMSImages\MID00003\boot.MID00003.wim

Share this post


Link to post
Share on other sites

My WDS seems to have gotten configured by CM atleast.. But i dont have a folder called "REMINST".. to me its "RemoteInstall"

 

I also have a working CM 2007 system with pxe boot.

 

If i dont configure dhcp with option 66 (CM ip) and 67 with \Boot\x64\wdsnbp.. i get a PXE-E53 "No boot filename received

Share this post


Link to post
Share on other sites

I have it on my primary and was going to put it on a remote. i ended up shutting down my 2012 box and started the 2007 back up. Had a boundry issue and had to delete the all the old sms stuff from the system management in ad and let it all come back and then it worked... so i thought I would turn off my 2007, delete all the AD items in system management and turn on my 2012. Still nothing.

 

Change the boundaries to AD instead of IP range and nothing.\

WDS service is running and not configured.

 

I do notice when I uncheck the pxe on my DP and hit apply and ok, I can open it back up and it's still checked.

Share this post


Link to post
Share on other sites

This was the same error I was getting but not sure everyone is having the exact same issue...

 

Have you tried this to manually force the boot image to deploy - http://www.windows-noob.com/forums/index.php?/topic/4716-fail-to-test-the-pxe-on-sccm2012/#entry19437 I was getting absolutely nowhere until I did this now it works as expected.

Share this post


Link to post
Share on other sites

Fixed my issue.

 

All i wanted to see was the pxe come up and then I would continue and after it didn't work I made a trigger disk and could boot into PE, but it said I had no TS, so I made one. Advertised it to all computer and all unknown and then the pxe started working.

 

guess i should have made the ad before trying to see if pxe was going to work.

 

The old site site was turned back on and it had a new boot image on it, so i thought it was the 2012 sccm. Once powered off, no PXE boot found again.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.