Jump to content


  • 0
anyweb

how can I deploy Windows Server 2008 using SCCM 2007 - 3 Part Guide

Question

The following Step by Step 3 part guide to Deploying Windows Server 2008 using SCCM 2007 covers all the steps necessary to get you up and running in no time at all, screenshots and helpful text show you how to do IT including preconfiguring roles such as Active Directory (ADDS) and DNS.

 

 

 

This 3 part guide is aimed at those of you who can succesfully deploy applications (such as Microsoft Office or Firefox) and Operating Systems (such as Windows Vista SP1 and Windows XP sp3. You'll need to be familiar with Microsoft SMS or SCCM and understand what packages, advertisements and collections mean, the guide will however link you to other guides to bring you every step of the way down the entire path.

 

 

Part 1.

 

 

* Add new Operating System Install Package

* Import new Task Sequence

 

 

Part 2.

 

* Create and then Update distribution points for the MDT Server packages

* Editing the Task Sequence

* Adding Server Roles and Features

 

Part 3.

 

* Create a new collection

* Advertise the Task sequence to a collection

* Add server to collection

* Set the IP address as a variable

* The Deployment

* Troubleshooting PXE errors

 

The guide above has taken a lot of time to document and I'm quite sure that you will find it helpful (lots of screenshots of every step..)

good luck,

 

cheers

anyweb

Share this post


Link to post
Share on other sites

Recommended Posts

  • 0

ATTENTION

this is a try on STEP3 to deploy (the image not to capture which is still failing...")

 

Hello,

 

Could it something due tio the Client Unassigned?

if so why is it unassigned as it is showing with a Cleint and site code on the SCCM Site Server?

 

Action: Discovery Data Collection Cycle smscliui 6/2/2009 12:09:14 PM 3528 (0x0DC8)

Action: MSI Product Source Update Cycle smscliui 6/2/2009 12:09:14 PM 3528 (0x0DC8)

Action: Standard File Collection Cycle smscliui 6/2/2009 12:09:14 PM 3528 (0x0DC8)

WARNING - Client is currently unassigned or an error occurred retrieving the assigned site. GetAssignedSite() returned : 0X0 smscliui 6/2/2009 12:09:14 PM 3528 (0x0DC8)

CP Site Assignment Options set to smscliui 6/2/2009 12:09:14 PM 3528 (0x0DC8)

CP Cache Options set to smscliui 6/2/2009 12:09:16 PM 3528 (0x0DC8)

wszMonikerName Elevation:Administrator!new:{7DBDD3CA-11BD-406C-9EE4-B0AAE170EE2E}, error: 0x0 smscliui 6/2/2009 12:09:16 PM 3528 (0x0DC8)

CP Site Assignment Options set to smscliui 6/2/2009 12:09:17 PM 3528 (0x0DC8)

wszMonikerName Elevation:Administrator!new:{9967A433-A640-4A56-8C3D-D8E8F95FF8F3}, error: 0x0 smscliui 6/2/2009 12:09:17 PM 3528 (0x0DC8)

WARNING - Client is currently unassigned or an error occurred retrieving the assigned site. GetAssignedSite() returned : 0X80040002 smscliui 6/2/2009 12:09:17 PM 3528 (0x0DC8)

CP Site Assignment Options set to smscliui 6/2/2009 12:09:17 PM 3528 (0x0DC8)

CP Cache Options set to smscliui 6/2/2009 12:09:17 PM 3528 (0x0DC8)

Attempt to auto discover site has failed. Error: 0X40002 smscliui 6/2/2009 12:09:21 PM 3528 (0x0DC8)

Received CCliCfgPropSheet::OnDestroy notification smscliui 6/2/2009 12:09:23 PM 3528 (0x0DC8)

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/2/2009 12:09:23 PM 3528 (0x0DC8)

CCliCfgControlPanel::OnExit smscliui 6/2/2009 12:09:23 PM 3528 (0x0DC8)

SMS_Authority not configured LocationServices 6/2/2009 12:26:31 PM 2120 (0x0848)

LSGetSiteCodeFromWMI : Site code returned from WMI is <> LocationServices 6/2/2009 12:26:31 PM 2120 (0x0848)

LSRefreshSiteCode LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetGPSiteCode LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetGPSiteCode: Failed to Get Site Code from Group Policy Reg key [software\Microsoft\SMS\Mobile Client] (80070002) LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

ProcessPendingSiteAssignment LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetAutoAssignFlagFromWMI LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSRefreshManagementPoint LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetSiteCodeFromWMI LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

SMS_Authority not configured LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetSiteCodeFromWMI : Site code returned from WMI is <> LocationServices 6/2/2009 12:36:31 PM 2120 (0x0848)

LSGetSiteCodeFromWMI LocationServices 6/2/2009 12:36:36 PM 3016 (0x0BC8)

SMS_Authority not configured LocationServices 6/2/2009 12:36:36 PM 3016 (0x0BC8)

LSGetSiteCodeFromWMI : Site code returned from WMI is <> LocationServices 6/2/2009 12:36:36 PM 3016 (0x0BC8)

LSGetSiteCodeFromWMI LocationServices 6/2/2009 12:36:58 PM 2436 (0x0984)

SMS_Authority not configured LocationServices 6/2/2009 12:36:58 PM 2436 (0x0984)

LSGetSiteCodeFromWMI : Site code returned from WMI is <> LocationServices 6/2/2009 12:36:58 PM 2436 (0x0984)

LSGetSiteCodeFromWMI LocationServices 6/2/2009 12:36:59 PM 3180 (0x0C6C)

SMS_Authority not configured LocationServices 6/2/2009 12:36:59 PM 3180 (0x0C6C)

 

Thanks,

Dom

Share this post


Link to post
Share on other sites

  • 0

has it run the task sequence already ? if so it will ignore the advertisement if it is set to Never rerun..

 

you could use right-click tools or Roger Zanders SCCM client center to rerun the advertisement (very useful in a testing environment)

 

cheers

anyweb

Share this post


Link to post
Share on other sites

  • 0
has it run the task sequence already ? if so it will ignore the advertisement if it is set to Never rerun..

 

you could use right-click tools or Roger Zanders SCCM client center to rerun the advertisement (very useful in a testing environment)

 

cheers

anyweb

 

it is a new TS so it should not have run already the TS...

Share this post


Link to post
Share on other sites

  • 0
it is a new TS so it should not have run already the TS...

 

it seems there was a firewall issue along the path at least . Now I turned off the firewall before processing ... but still not working the Client did not catch the TS!!!

Share this post


Link to post
Share on other sites

  • 0
from your log

 

 

 

and

 

 

 

and

 

Yes I had this but as I am able to resolved the firewall (and DNS) now I can do a NSLookup both ways, ping both ways everything is fine... so why the Netbios name could be unknown?

 

The machine is known from the SCCM Console, I added with the Discovery Active Directory System then Computer Association (OSD) by the Mac Address and everything came up supposedly fine as have the HW Inventory done, the Client installed. I noticed the Client has Configuration manager but so far I see only Machine Policy and Evaluation Cycle and User Policy and Evaluation Cycle under the Actions tab of the Client!!! should I wait for the others to appear and try to process later...

 

As the machine was previously used on another site server I did:

- Delete the Client on the machine: ccmsetup /uninstall

- Delete the machine from the previous server

- Add the boundaries to the new server

 

What did I miss?

If a boundary is set like this:

10.2.231.0 (Full IP Subnet)

10.2.231.0 - 10.2.231.23 (IP Range)

which one overwrite the other??? I might have to remove the full subnet, isn't it?

 

any ideas?

 

Thanks,

- Dom

-

Thanks,

Dominique

Share this post


Link to post
Share on other sites

  • 0
Yes I had this but as I am able to resolved the firewall (and DNS) now I can do a NSLookup both ways, ping both ways everything is fine... so why the Netbios name could be unknown?

 

The machine is known from the SCCM Console, I added with the Discovery Active Directory System then Computer Association (OSD) by the Mac Address and everything came up supposedly fine as have the HW Inventory done, the Client installed. I noticed the Client has Configuration manager but so far I see only Machine Policy and Evaluation Cycle and User Policy and Evaluation Cycle under the Actions tab of the Client!!! should I wait for the others to appear and try to process later...

 

As the machine was previously used on another site server I did:

- Delete the Client on the machine: ccmsetup /uninstall

- Delete the machine from the previous server

- Add the boundaries to the new server

 

What did I miss?

If a boundary is set like this:

10.2.231.0 (Full IP Subnet)

10.2.231.0 - 10.2.231.23 (IP Range)

which one overwrite the other??? I might have to remove the full subnet, isn't it?

 

any ideas?

 

Thanks,

- Dom

-

Thanks,

Dominique

Hello,

 

NSLOOKUP works fine both ways(SCCM Server to Client & Client to SCCM Server)

C:\WINDOWS\system32\CCM\Cache is empty is it normal?

Control Panel > Configuration Manager > Actions contains only

Machine Policy Retrieval & Evaluation Cycle

User Policy Retrieval & Evaluation Cycle

 

Hardware Inventory is correct

Software Inventory remains empty and Last Scan is blank

 

....

Should I delete the machine again from the console and do a discover + install client + computer association etc...

 

the site is correct with SRV where should I look for the issue...Netbios name: unkown...

 

from the smscliui...

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/2/2009 5:28:06 PM 2224 (0x08B0)

Common Client Agent Settings for the client are missing from WMI. smscliui 6/2/2009 5:28:08 PM 2256 (0x08D0)

Software Distribution Site Settings for the client are missing from WMI. smscliui 6/2/2009 5:28:08 PM 2256 (0x08D0)

Software Distribution Site Settings for the client are missing from WMI. smscliui 6/2/2009 5:28:09 PM 2256 (0x08D0)

Advertising 0 scripts in RAP smscliui 6/2/2009 5:28:09 PM 2256 (0x08D0)

Common Client Agent Settings for the client are missing from WMI. smscliui 6/2/2009 5:28:09 PM 2256 (0x08D0)

Site is in mixed mode. Internet tab will not be displayed. smscliui 6/3/2009 10:41:05 AM 1956 (0x07A4)

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/3/2009 10:41:18 AM 1956 (0x07A4)

Site is in mixed mode. Internet tab will not be displayed. smscliui 6/3/2009 10:44:49 AM 3644 (0x0E3C)

Current Assigned Site: SRV smscliui 6/3/2009 10:51:26 AM 3644 (0x0E3C)

wszMonikerName Elevation:Administrator!new:{7DBDD3CA-11BD-406C-9EE4-B0AAE170EE2E}, error: 0x0 smscliui 6/3/2009 10:51:27 AM 3644 (0x0E3C)

wszMonikerName Elevation:Administrator!new:{9967A433-A640-4A56-8C3D-D8E8F95FF8F3}, error: 0x0 smscliui 6/3/2009 10:51:28 AM 3644 (0x0E3C)

Current Assigned Site: SRV smscliui 6/3/2009 10:51:28 AM 3644 (0x0E3C)

SMS Site code has not been changed. smscliui 6/3/2009 10:51:36 AM 3644 (0x0E3C)

The schedule remains disabled smscliui 6/3/2009 10:51:36 AM 3644 (0x0E3C)

SMS Site code has not been changed. smscliui 6/3/2009 10:51:38 AM 3644 (0x0E3C)

The schedule remains disabled smscliui 6/3/2009 10:51:38 AM 3644 (0x0E3C)

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/3/2009 10:51:38 AM 3644 (0x0E3C)

Site is in mixed mode. Internet tab will not be displayed. smscliui 6/3/2009 10:51:44 AM 1248 (0x04E0)

Perform Action: Request & Evaluate Machine Policy - {8EF4D77C-8A23-45c8-BEC3-630827704F51}. Message sent, id={C871449B-E04D-4560-9A9C-938F88A6B4D6} smscliui 6/3/2009 10:51:48 AM 988 (0x03DC)

The schedule remains disabled smscliui 6/3/2009 10:51:50 AM 1248 (0x04E0)

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/3/2009 10:51:50 AM 1248 (0x04E0)

Site is in mixed mode. Internet tab will not be displayed. smscliui 6/3/2009 10:57:01 AM 3184 (0x0C70)

Perform Action: Request & Evaluate Machine Policy - {8EF4D77C-8A23-45c8-BEC3-630827704F51}. Message sent, id={D51C1A09-EF83-4E76-A3C9-2FB9B845A717} smscliui 6/3/2009 10:57:05 AM 2728 (0x0AA8)

Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={38A5C6FF-539C-48B1-93FE-21AB38B40FDD} smscliui 6/3/2009 10:57:07 AM 2728 (0x0AA8)

The schedule remains disabled smscliui 6/3/2009 10:57:09 AM 3184 (0x0C70)

CCliCfgDcmPage::FreeCallback - Detection Job is null. smscliui 6/3/2009 10:57:09 AM 3184 (0x0C70)

 

HKLM > Software > Microsoft > SMS > Mobile Client > AssignedSiteCode contains SRV the correct site

 

it seems my error is:

sending with winhttp failed; 80072ee7 TSMBootstrap 6/3/2009 12:46:08 PM 1952 (0x07A0)

it is received on

CLibSMSMessageWinHttpTransport::Send: URL: CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU:80 CCM_POST /ccm_system/request TSMBootstrap 6/3/2009 12:46:08 PM 1952 (0x07A0)

 

what is this?

 

Thanks

Share this post


Link to post
Share on other sites

  • 0

II tried the same TS on three machines:

- XP picked the TS but failed later with 0x80004005 (smsts.log per attachment) --> incorrect site code???

- Vista did not picked the TS --> I am reimaging this machine

- W2K08 did not picked the TS --> incorrect site code...??? DTS instead of SRV

all machines have been moved from the old site DTS to the new site SRV but did not get the new site code why?

 

The three machines except their OS are supposdely the same...

- Same hardware

- Same Subnet

- Same NIC

 

Any idea is welcome...

Thanks,

- Dom

smsts.zip

Share this post


Link to post
Share on other sites

  • 0
I tried the same TS on three machines:

- XP picked the TS but failed later with 0x80004005 (smsts.log per attachment) --> incorrect site code???

- Vista did not picked the TS --> I am reimaging this machine

- W2K08 did not picked the TS --> incorrect site code...??? DTS instead of SRV

all machines have been moved from the old site DTS to the new site SRV but did not get the new site code why?

 

The three machines except their OS are supposdely the same...

- Same hardware

- Same Subnet

- Same NIC

 

Any idea is welcome...

 

Thanks,

- Dom

 

As I have nothing working anymore I will start with a basic question:

- How many boot image I need for:

. Hardwares: DC7700, DC7800, DL580

. Operating Systems: XP, Vista, Windows Server 2003. Windows Server 2008

. Network cards: HP NC380T PCIeDP Multifunc Gig Adapter, NC370iMultifunction Gigabit Server Adapter, Intel 82566DM, Intel® PRO/1000 PT Dual Port Connection, etc...

 

- NIC Drivers: What is the best practices to add NIC Drivers:

1. Computer Management > OSD > Drivers

2. Add the driver to Computer Management > OSD > Boot Images > Properties > WinPE Tab

3. Update Distribution Point for the Boot Image

4. Should I recreate a new CD?

4. Should I run from the Old CD create by Computer Management > OSD > Task Sequence > Create Task Sequence Media > Bootable Media?

 

Thanks,

- Dom

OPPMCCSTRN5_LOGS.zip

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.