Jump to content


Jeff K

Warning: Failed to copy the needed boot binaries from the boot image

By Jeff K, in Configuration Manager 2012

Recommended Posts

Jeff K Newbie

Jeff K

Posted
Posted

  • i am trying to get PXE working and not having much luck. in the lab we have 2 machines a CAS and a primary. i went and add the pxe to the DP and waited, then made sure the checkbox was checked for boot images being deployed to pxe DP. i have removed it and re add the PXE point. with no luck. i have added new Boot Images and push them out too. no luck. there is no AV in the lab and in prod there is with exclusions. there are fonts in the fonts folder and tried the same error that is here,

     

    http://www.niallbrady.com/2013/03/20/pxe-boot-failure-after-upgrading-to-system-center-2012-configuration-manager-service-pack-1/

     

     

    here is a glimpse of what is in the log.

    ================= PXE Provider loaded. ===================== 4/29/2013 2:24:11 PM

    Machine is running Windows Longhorn. (NTVersion=0X601, ServicePack=0) 4/29/2013 2:24:11 PM

    Cannot read the registry value of MACIgnoreListFile (00000000) 4/29/2013 2:24:11 PM

    MAC Ignore List Filename in registry is empty 4/29/2013 2:24:11 PM

    Begin validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/29/2013 2:24:11 PM

    Completed validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/29/2013 2:24:11 PM

    Initializing PXEPerfObject. 4/29/2013 2:24:11 PM

    Could not load logging configuration for component ccmperf. Using default values. 4/29/2013 2:24:11 PM

    Client is set to use HTTPS when available. The current state is 224. 4/29/2013 2:24:11 PM

    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>

    4/29/2013 2:24:12 PM

    PXE::CBootImageInfo::CBootImageInfo: key= 4/29/2013 2:24:12 PM

    PXE::CBootImageInfo::CBootImageInfo: key= 4/29/2013 2:24:12 PM

    Adding NCS0001F.2 4/29/2013 2:24:12 PM

    Found new image NCS0001F 4/29/2013 2:24:13 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:13 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:24:13 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:13 PM

    Begin validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/29/2013 2:24:13 PM

    Completed validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/29/2013 2:24:13 PM

    PXE Provider finished loading. 4/29/2013 2:24:13 PM

    Error opening file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Win32=32 4/29/2013 2:24:50 PM

    Retrying D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:50 PM

    Boot image NCS0001F has changed since added 4/29/2013 2:24:53 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:53 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:24:53 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:53 PM

    Boot image NCS0001F has changed since added 4/29/2013 2:24:54 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:54 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:24:54 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:24:54 PM

    Error opening file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Win32=32 4/29/2013 2:27:08 PM

    Retrying D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:08 PM

    Error opening file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Win32=32 4/29/2013 2:27:11 PM

    Retrying D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:11 PM

    Boot image NCS0001F has changed since added 4/29/2013 2:27:14 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:14 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:27:14 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:14 PM

    failed to copy D:\RemoteInstall\SMSTempBootFiles\NCS0001F\WINDOWS\Boot\Fonts\segmono_boot.ttf to D:\RemoteInstall\Boot\Fonts\segmono_boot.ttf 4/29/2013 2:27:14 PM

    InstallBootFilesForImage failed. 0x80070003 4/29/2013 2:27:14 PM

    Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.

    The operation completed successfully. (Error: 00000000; Source: Windows) 4/29/2013 2:27:14 PM

    Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..

    The system cannot find the path specified. (Error: 80070003; Source: Windows) 4/29/2013 2:27:14 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.27.14.04.{C5889639-A09D-48CC-8C50-FAD7D839FA2E}.boot.bcd deleted. 4/29/2013 2:27:14 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.27.14.04.{C5889639-A09D-48CC-8C50-FAD7D839FA2E}.boot.bcd.log deleted. 4/29/2013 2:27:14 PM

    Found new image NCS0001F 4/29/2013 2:27:18 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:18 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:27:18 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:27:18 PM

    failed to copy D:\RemoteInstall\SMSTempBootFiles\NCS0001F\WINDOWS\Boot\Fonts\segmono_boot.ttf to D:\RemoteInstall\Boot\Fonts\segmono_boot.ttf 4/29/2013 2:27:18 PM

    InstallBootFilesForImage failed. 0x80070003 4/29/2013 2:27:18 PM

    Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.

    The operation completed successfully. (Error: 00000000; Source: Windows) 4/29/2013 2:27:18 PM

    Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..

    The system cannot find the path specified. (Error: 80070003; Source: Windows) 4/29/2013 2:27:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.27.18.05.{59074806-9AC8-4B10-92D7-EB855823D34F}.boot.bcd deleted. 4/29/2013 2:27:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.27.18.05.{59074806-9AC8-4B10-92D7-EB855823D34F}.boot.bcd.log deleted. 4/29/2013 2:27:18 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:29:18 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:29:18 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:29:18 PM

    failed to copy D:\RemoteInstall\SMSTempBootFiles\NCS0001F\WINDOWS\Boot\Fonts\segmono_boot.ttf to D:\RemoteInstall\Boot\Fonts\segmono_boot.ttf 4/29/2013 2:29:18 PM

    InstallBootFilesForImage failed. 0x80070003 4/29/2013 2:29:18 PM

    Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.

    The operation completed successfully. (Error: 00000000; Source: Windows) 4/29/2013 2:29:18 PM

    Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..

    The system cannot find the path specified. (Error: 80070003; Source: Windows) 4/29/2013 2:29:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.29.18.06.{C2D1C85A-BCE1-4E7A-AFC7-72016A2CFBAE}.boot.bcd deleted. 4/29/2013 2:29:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.29.18.06.{C2D1C85A-BCE1-4E7A-AFC7-72016A2CFBAE}.boot.bcd.log deleted. 4/29/2013 2:29:18 PM

    Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:31:18 PM

    Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim

    PackageID: NCS0001F

    ProductName: Microsoft® Windows® Operating System

    Architecture: 0

    Description: Microsoft Windows PE (x86)

    Version:

    Creator:

    SystemDir: WINDOWS

    4/29/2013 2:31:18 PM

    Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/29/2013 2:31:18 PM

    failed to copy D:\RemoteInstall\SMSTempBootFiles\NCS0001F\WINDOWS\Boot\Fonts\segmono_boot.ttf to D:\RemoteInstall\Boot\Fonts\segmono_boot.ttf 4/29/2013 2:31:18 PM

    InstallBootFilesForImage failed. 0x80070003 4/29/2013 2:31:18 PM

    Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.

    The operation completed successfully. (Error: 00000000; Source: Windows) 4/29/2013 2:31:18 PM

    Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..

    The system cannot find the path specified. (Error: 80070003; Source: Windows) 4/29/2013 2:31:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.31.18.07.{CB6B0A6C-34D5-49CA-B9D3-B5FAEF0FE63F}.boot.bcd deleted. 4/29/2013 2:31:18 PM

    File D:\RemoteInstall\SMSTemp\2013.04.29.14.31.18.07.{CB6B0A6C-34D5-49CA-B9D3-B5FAEF0FE63F}.boot.bcd.log deleted. 4/29/2013 2:31:18 PM

     

    THe boot images versions # are 6.2.9200.16384, so i know its not related to ADK.

    I have tried using Dism and no luck. i like to get this into production soon. but dont want to risk the same issue, it's SP1 no CU1 on it. it's a fresh install of ConfigMGR 2-12 SP1. Any help be great. I am learning still so go easy on me with the technical stuff ;)

Share this post

Link to post
Share on other sites
anyweb Proficient

anyweb

Posted
Posted

are you sure you've checked everything in the blogpost linked above ? it seems you have the same problem that I blogged about

Share this post

Link to post
Share on other sites
Jeff K Newbie

Jeff K

Posted
Posted

I believe i am, i removed the role cleaned the regisrty using ccleaner and tried again. here is the log:

 

================= PXE Provider loaded. ===================== 4/30/2013 8:21:51 AM
Machine is running Windows Longhorn. (NTVersion=0X601, ServicePack=0) 4/30/2013 8:21:51 AM
Cannot read the registry value of MACIgnoreListFile (00000000) 4/30/2013 8:21:51 AM
MAC Ignore List Filename in registry is empty 4/30/2013 8:21:51 AM
Begin validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/30/2013 8:21:51 AM
Completed validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/30/2013 8:21:51 AM
Initializing PXEPerfObject. 4/30/2013 8:21:51 AM
Could not load logging configuration for component ccmperf. Using default values. 4/30/2013 8:21:51 AM
Client is set to use HTTPS when available. The current state is 224. 4/30/2013 8:21:51 AM
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
4/30/2013 8:21:52 AM
PXE::CBootImageInfo::CBootImageInfo: key= 4/30/2013 8:21:52 AM
PXE::CBootImageInfo::CBootImageInfo: key= 4/30/2013 8:21:52 AM
Adding NCS0001F.2 4/30/2013 8:21:52 AM
Found new image NCS0001F 4/30/2013 8:21:57 AM
Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:57 AM
Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim
PackageID: NCS0001F
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
4/30/2013 8:21:57 AM
Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:57 AM
InstallBootFilesForImage failed. 0x80004005 4/30/2013 8:21:57 AM
Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.
The operation completed successfully. (Error: 00000000; Source: Windows) 4/30/2013 8:21:57 AM
Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows) 4/30/2013 8:21:57 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.57.01.{84CEDC6B-ACDD-4D6B-8832-9BA6A880F915}.boot.bcd deleted. 4/30/2013 8:21:57 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.57.01.{84CEDC6B-ACDD-4D6B-8832-9BA6A880F915}.boot.bcd.log deleted. 4/30/2013 8:21:57 AM
Found new image NCS0001F 4/30/2013 8:21:57 AM
Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:57 AM
Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim
PackageID: NCS0001F
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
4/30/2013 8:21:57 AM
Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:57 AM
Begin validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/30/2013 8:21:57 AM
Completed validation of Certificate [Thumbprint B125A64AB8506115428D81787F56D7A12E4CEC15] issued to 'NWPRI01.nwtraders.msft' 4/30/2013 8:21:57 AM
PXE Provider finished loading. 4/30/2013 8:21:57 AM
InstallBootFilesForImage failed. 0x80004005 4/30/2013 8:21:57 AM
Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.
The operation completed successfully. (Error: 00000000; Source: Windows) 4/30/2013 8:21:57 AM
Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows) 4/30/2013 8:21:57 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.57.02.{6F4286FD-6853-45CF-8747-992311C41E65}.boot.bcd deleted. 4/30/2013 8:21:57 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.57.02.{6F4286FD-6853-45CF-8747-992311C41E65}.boot.bcd.log deleted. 4/30/2013 8:21:57 AM
Found new image NCS0001F 4/30/2013 8:21:58 AM
Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:58 AM
Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim
PackageID: NCS0001F
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
4/30/2013 8:21:58 AM
Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:21:58 AM
InstallBootFilesForImage failed. 0x80004005 4/30/2013 8:21:59 AM
Warning: Failed to copy the needed boot binaries from the boot image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim.
The operation completed successfully. (Error: 00000000; Source: Windows) 4/30/2013 8:21:59 AM
Failed adding image D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows) 4/30/2013 8:21:59 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.58.03.{E87B0E84-D47E-4310-934E-3B4BEF5166AF}.boot.bcd deleted. 4/30/2013 8:21:59 AM
File D:\RemoteInstall\SMSTemp\2013.04.30.08.21.58.03.{E87B0E84-D47E-4310-934E-3B4BEF5166AF}.boot.bcd.log deleted. 4/30/2013 8:21:59 AM
Cannot read the registry value of MACIgnoreListFile (800703e5) 4/30/2013 8:22:01 AM
MAC Ignore List Filename in registry is empty 4/30/2013 8:22:01 AM
Found new image NCS0001F 4/30/2013 8:22:01 AM
Opening image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:22:01 AM
Found Image file: D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim
PackageID: NCS0001F
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
4/30/2013 8:22:01 AM
Closing image file D:\RemoteInstall\SMSImages\NCS0001F\boot.NCS0001F.wim 4/30/2013 8:22:01 AM
Cannot read the registry value of MACIgnoreListFile (00000000) 4/30/2013 8:22:13 AM
MAC Ignore List Filename in registry is empty 4/30/2013 8:22:13 AM

looked int he fonts folder and they are there. i thought 0x80004005 was an Access Denied. but to where???? the PXEBootFiles folder in C:\windows\temp isnt present either.

if it is trying to inject boot binaries it have to mount it with DISM, but no DISM log either in c:\windows\logs\dism

post-5927-0-40090800-1367327242_thumb.png

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.