The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 hi folks to be honest im trying the best to avoid this problem but with no luck i worked based on anyweb topics in installing SCCM 2007 , i did all the configurations based on the 3 parts he explained in the section setup sccm 2007 , now im in a process of installing the sccm client on an xp computer using push installation but its not installing i tried to check if there are any icons created in contol panel on the client side but nothing is there , ichecked if there is any folder to fetch the logs on the client side under C:\WINDOWS\system32\ccmsetup but there isnt any folder created !!! i checked C:\Program Files\Microsoft Configuration Manager\Logs\ccm.log on the sccm server and this is what i found : ( attached ) how can i successfully push to all my clients the sccm agent as we have here over 2000 clients and ofcourse i cant do that manually any help would be highly appreciated thanks in advance ccm.log Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 update : i can install it manually butits not showing from sccm server side that the client has the installation ( does it take alot of time t reflect the update ??? ) and of course i cant install it using push installation im using enterprise admin account for all the permissions needed to be specified as im using sccm in a test environment so far before i go to the deployment network thanks PS : anyweb your tutorials are just awesome edit: is that why YOU and your friends ripped them all off and placed them on certcollection.org?? Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 update : the client appeared in the config console after doing a manual restart for the client ( is that necessary ? how can i fasten the issue ) but even if installed the client manually its showing not approved why ? how to auto approve it although i configured that in the site settings so i have 2 probs now : 1) how to make the push installation work smoothly 2) how to auto approve those clients ! thanks Quote Share this post Link to post Share on other sites More sharing options...
Tobie Posted April 18, 2009 Report post Posted April 18, 2009 Look here... http://technet.microsoft.com/sv-se/library...607(en-us).aspx /Tobias Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 thanks tobie but i already checked that link with no help Quote Share this post Link to post Share on other sites More sharing options...
Tobie Posted April 18, 2009 Report post Posted April 18, 2009 Hmm, well that is strange. Have you updated the collection you're looking in? I suspect that you not fallowed anywebs instructions properly, you might have missed something, please go through the instructions again to verify that everything is correct cuz it should work with anywebs instruktions. Or else, i still suspect connection problems. Are you using any firewall on the client side? If we should be able to help you, we need some more information about your environment. /Tobias Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted April 18, 2009 Report post Posted April 18, 2009 if the clients are XP then they'll need BITS installed first and most likely a reboot before the client can get installed... that might explain what you are seeing... what version of XP is it ? you could try pushing the client out using Software Update Point see here for details of that Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 tell me what info u want and i can provide it for u firewall is disabled , im currently not at the office but once im there i can pull u moe info if u like just to avoid this prob as all the other features are working smoothly but the push installation itself cant be done in an automated way so far Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 anyweb , i think bits isnt installed on the client , im using xp pro sp3 , does it come by default with bits installed ? Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted April 18, 2009 Report post Posted April 18, 2009 tell me how you are instlaling the client, is it from the All Systems colleciton ? or some other method Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 from all system collection , right click on any client then install client Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted April 18, 2009 Report post Posted April 18, 2009 when troubleshooting this i normally open task manager on the client i'm installing on... then watch the processes and as soon as i initiate the install you should see ccmsetup.exe start up on the client (nearly sure thats the file name but not on the server/client now so can't verify) can you verify that you are seeing this please ? is the client in the boundary you defined in ConfigMgr Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 18, 2009 Report post Posted April 18, 2009 for the 1st question 1) i checked the process and nth appears at all as i didnt even initiate the instalation of the client 2) yes its included in the boundry that i create based on IP , do you want me to create it based on sites ? donno i gave up Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted April 19, 2009 Report post Posted April 19, 2009 for the 1st question 1) i checked the process and nth appears at all as i didnt even initiate the instalation of the client 2) yes its included in the boundry that i create based on IP , do you want me to create it based on sites ? donno i gave up try setting the boundary the same way as I have done in the guides, point it to your AD does that help ? Quote Share this post Link to post Share on other sites More sharing options...
The Last Remnant Posted April 19, 2009 Report post Posted April 19, 2009 ill give a try in a couple of days as i have a plane to catch ill update the situation soon thanks for your help in advance PS : this site is awesome !! keep the great job dude Quote Share this post Link to post Share on other sites More sharing options...
Rash007 Posted June 25, 2009 Report post Posted June 25, 2009 ill give a try in a couple of days as i have a plane to catch ill update the situation soon thanks for your help in advance PS : this site is awesome !! keep the great job dude Dear Friends, Am also facing same Problem but these all steps i followed still i unable to push my issue is i can able to push server shows its assigned YES but Client NO Please Help Me' RAS F1 Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted June 25, 2009 Report post Posted June 25, 2009 kick off a Data Discovery cycle and see what happens Quote Share this post Link to post Share on other sites More sharing options...
Jovin Posted July 7, 2009 Report post Posted July 7, 2009 I'm kind of on the same boat except that a quarter of the desktops on "All Windows Workstations or Professional Systems" (note: staff workstations are a mixture of WinXP SP3, and Vista SP1) have the client installed. But for the most part it doesn't. I also noticed that those staff workstations are not "Approved". What I don't get is that they're are on the same boundaries, setup via IP subnet because we're on an OU. I've tried to install the client via ConfigMgr Console to a Vista workstation and checked the task manager to see if the CCMSETUP launches - no-go. Help please... Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted July 7, 2009 Report post Posted July 7, 2009 firewall enabled or disabled ? Quote Share this post Link to post Share on other sites More sharing options...
Jovin Posted July 7, 2009 Report post Posted July 7, 2009 firewall enabled or disabled ? It's enabled. Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted July 7, 2009 Report post Posted July 7, 2009 try disabling it, does it work then Quote Share this post Link to post Share on other sites More sharing options...
Torpedo Posted July 8, 2009 Report post Posted July 8, 2009 Hi, I am having the same client push installation issue. I did not see any CCM icons on client. Here is how I added the WindowsXP Pro.Version2002SP3 client. 1. Complete the SCCM 2007 SP1 Server Setup as per guides 2. Login to client and changed Domain name to same as AD Domain Controller on SCCM 2007 SP1 Server which was successful. 3. Client was rebooted because of the above change. 4. Login to client as "Domain\Administrator" and verified for any new CCM icons in Control Panel. But I did not see any new icons or I did not see any ccmsetup dir. 5. Both the systems are pingable each other 6. Firewall is disabled on both the systems. Could someone let me know what I am missing? Here is the log from SCCM server: Submitted request successfully $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:09.964 2009 Pacific Daylight Time><thread=3204 (0xC84)> Getting a new request from queue "Incoming" after 100 millisecond delay. $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:09.964 2009 Pacific Daylight Time><thread=3204 (0xC84)> Found CCR "v82d31n4.CCR" in queue "Incoming". $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:09.964 2009 Pacific Daylight Time><thread=3204 (0xC84)> Received request: "V82D31N4" for machine name: "CLIENTHOST" on queue: "Incoming". $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.064 2009 Pacific Daylight Time><thread=3204 (0xC84)> Stored request "V82D31N4", machine name "CLIENTHOST", in queue "Processing". $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.065 2009 Pacific Daylight Time><thread=3204 (0xC84)> ======>Begin Processing request: "V82D31N4", machine name: "CLIENTHOST" $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.065 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Trying each entry in the SMS Client Remote Installation account list~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.065 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\client.xvmzag.sfbay.corp.com\admin$' using account 'XVMZAG\SMSadmin'~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.066 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account XVMZAG\SMSadmin (00000005) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.112 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account XVMZAG\SMSadmin (00000569) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.135 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\client.xvmzag.sfbay.corp.com\admin$' using machine account.~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.136 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Failed to connect to \\client.xvmzag.sfbay.corp.com\admin$ using machine account (5) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.155 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> ERROR: Failed to connect to the \\client.xvmzag.sfbay.corp.com\admin$ share using account 'Machine Account' $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.155 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Trying each entry in the SMS Client Remote Installation account list~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.155 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\CLIENTHOST\admin$' using account 'XVMZAG\SMSadmin'~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.155 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account XVMZAG\SMSadmin (00000005) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.220 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account XVMZAG\SMSadmin (00000569) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.242 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\CLIENTHOST\admin$' using machine account.~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.242 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Failed to connect to \\CLIENTHOST\admin$ using machine account (5) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.262 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> ERROR: Failed to connect to the \\CLIENTHOST\admin$ share using account 'Machine Account' $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.262 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Trying each entry in the SMS Client Remote Installation account list~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.263 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\<IPADDRESS>\admin$' using account 'XVMZAG\SMSadmin'~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.263 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account XVMZAG\SMSadmin (00000005) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.307 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account XVMZAG\SMSadmin (00000569) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.330 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Attempting to connect to administrative share '\\<IPADDRESS>\admin$' using machine account.~ $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.330 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> Failed to connect to \\<IPADDRESS>\admin$ using machine account (5) $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.349 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> ERROR: Failed to connect to the \\<IPADDRESS>\admin$ share using account 'Machine Account' $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.350 2009 Pacific Daylight Time><thread=3308 (0xCEC)> ---> ERROR: Unable to access target machine for request: "V82D31N4", machine name: "CLIENTHOST", access denied or invalid network path. $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.350 2009 Pacific Daylight Time><thread=3308 (0xCEC)> Retry request id for "V82D31N4" set to "client_xvmzag_sfbay_corp_com.XVMZAG" $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.350 2009 Pacific Daylight Time><thread=3308 (0xCEC)> Stored request "raplix_xvmzag_sfbay_corp_com.XVMZAG", machine name "CLIENTHOST", in queue "Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Tue Jul 07 19:04:10.351 2009 Pacific Daylight Time><thread=3308 (0xCEC)> <======End request: "raplix_xvmzag_sfbay_corp_com.XVMZAG", machine name: "CLIENTHOST". $$<SMS_CLIENT_CONFIG_MANAGER><Tue Ju Thanks Quote Share this post Link to post Share on other sites More sharing options...
anyweb Posted July 8, 2009 Report post Posted July 8, 2009 on the SCCM server, you have to check if the client appears in the All Systems Collection does it ? Quote Share this post Link to post Share on other sites More sharing options...
Torpedo Posted July 8, 2009 Report post Posted July 8, 2009 Yes the client is appeared there. But how do I make sure that client is installed as CCM client? I did not see anything about CCM on my client. Thanks Quote Share this post Link to post Share on other sites More sharing options...
Jovin Posted July 9, 2009 Report post Posted July 9, 2009 try disabling it, does it work then Nope, tried it and just tried it again just to make sure. Quote Share this post Link to post Share on other sites More sharing options...
