Jump to content


  • 0
Dom

Could not find the image captured...

Question

Hello,

 

I have run (apparently sucessfully) the Build and Capture process through a Task Sequence for Windows Server 2008 but I could not find the image captured files anywhere???

per attachment the smsts.log files and ccm.log...

 

Thanks,

- Dom

smsts.log

smsts_20090504_163719.log

ccm.log

ccm.zip

Share this post


Link to post
Share on other sites

5 answers to this question

Recommended Posts

  • 0

from within the Capture section of the smsts_20090504_163719.log file

 

<![LOG[Error. Received 0x80072ee7 from WinHttpSendRequest.]LOG]!><time="15:51:30.125+000" date="05-04-2009" component="TSManager" context="" type="1" thread="1468" file="libsmsmessaging.cpp:7665">

<![LOG[unknown host (gethostbyname failed)]LOG]!><time="15:51:30.140+000" date="05-04-2009" component="TSManager" context="" type="3" thread="1468" file="libsmsmessaging.cpp:624">

<![LOG[hr, HRESULT=80072ee7 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,7714)]LOG]!><time="15:51:30.140+000" date="05-04-2009" component="TSManager" context="" type="0" thread="1468" file="libsmsmessaging.cpp:7714">

<![LOG[sending with winhttp failed; 80072ee7]LOG]!><time="15:51:30.140+000" date="05-04-2009" component="TSManager" context="" type="3" thread="1468" file="libsmsmessaging.cpp:7714">

<![LOG[Will retry in 5 second(s)]LOG]!><time="15:51:30.140+000" date="05-04-2009" component="TSManager" context="" type="2" thread="1468" file="libsmsmessaging.cpp:1937">

<![LOG[Retrying...]LOG]!><time="15:51:35.171+000" date="05-04-2009" component="TSManager" context="" type="2" thread="1468" file="libsmsmessaging.cpp:1941">

<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU:80 CCM_POST /ccm_system/request]LOG]!><time="15:51:35.171+000" date="05-04-2009" component="TSManager" context="" type="1" thread="1468" file="libsmsmessaging.cpp:7446">

<![LOG[Error. Received 0x80072ee7 from WinHttpSendRequest.]LOG]!><time="15:51:35.171+000" date="05-04-2009" component="TSManager" context="" type="1" thread="1468" file="libsmsmessaging.cpp:7665">

<![LOG[unknown host (gethostbyname failed)]LOG]!><time="15:51:35.171+000" date="05-04-2009" component="TSManager" context="" type="3" thread="1468" file="libsmsmessaging.cpp:624">

<![LOG[hr, HRESULT=80072ee7 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,7714)]LOG]!><time="15:51:35.171+000" date="05-04-2009" component="TSManager" context="" type="0" thread="1468" file="libsmsmessaging.cpp:7714">

<![LOG[sending with winhttp failed; 80072ee7]LOG]!>

 

looks like DNS issues or network issues, which might explain why it's failing to capture the WIM file to the network

Share this post


Link to post
Share on other sites

  • 0
from within the Capture section of the smsts_20090504_163719.log file

 

 

 

looks like DNS issues or network issues, which might explain why it's failing to capture the WIM file to the network

Hi Any,

 

The machines are still in a WORKGROUP and effectiveley could not be reached through a simple ping... let me see what is going on...

Does the Captures is done from the server (so no ping...) to the machine (pull) or from the machine to the server (push!!)

ping to the machine does not work...

ping from the machine to the SCCM server works...

IPCONFIG /ALL is okay with DNS values...WINS values...

TELNET CONFIGMGRSRV 80 works fine from both machine (Vista or Windows Server 2008)

 

Do I need to join the domain to capture the image created on the workstations?

 

Could it Security more than DNS?

 

Still looking

 

I re-run the process now and still issues...

Failed to connect to "\\CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU\SMSPKGD$\SRV00053". Invalid username or password. PrepareOS 5/5/2009 5:04:17 PM 2664 (0x0A68)

 

CLibSMSMessageWinHttpTransport::Send: URL: CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU:80 CCM_POST /ccm_system/request TSManager 5/5/2009 5:07:29 PM 1468 (0x05BC)

If I do a TELNET CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU 80 it works

 

Failed to connect the image capture destination \\CONFIGMGRSRV\Imaging\Captures.

The specified network password is not correct. (Error: 80070056; Source: Windows) CaptureSystemImage 5/5/2009 5:08:56 PM 1616 (0x0650)

Which account is it? I used the one I specified under "Capture the Reference Machine" when editing a TS, is it correct?

I used the account and password "Capture the Reference Machine" after the image process is done and I am able to connect...!!!

 

Or should it be the one under "Apply Windows Settings" (Enable the account and specify the local administrator password) when editing TS?

 

Or should it be the one under "Capture the Reference Machine"?

**BTW the "Capture the Reference Machine" & "Apply Network Settings" are the same for me.

 

The shares \\CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU\SMSPKGD$ or \\CONFIGMGRSRV\Imaging are shared "everyone" full control and "NTFS Users" Full Control.

The subfolder Captures is not shared but it has the same NTFS security...

 

Failed to connect to "\\CONFIGMGRSRV\Imaging\Captures" (86). Retry in 13 seconds. CaptureSystemImage 5/5/2009 5:07:48 PM 1616 (0x0650)

Should I put the FQDN for the servername \\CONFIGMGRSRV.AD.MEDCTR.UCLA.EDU\Imaging\Captures?

 

 

 

Thanks,

Dom

smsts.zip

Share this post


Link to post
Share on other sites

  • 0
to properly test DNS do a nslookup,

 

paste the results of that here

 

cheers

anyweb

Hi Any,

 

I have passed this issue after disjoining from the domain the workstation receiving the OS. For whatever reason XP & Vista don't care if the workstation is in a workgroup or a domain bit Windows Server 2008 should be ONLY workgroup... :(

...

 

So the build and capture works like a charm now I have done 3 Vista and 5 2008 to confirm... DNS, DHCP, etc... it works...

 

Now I would like to ONLY Capture the image from the reference machine after some manual update...

 

I created a TS that I advertised to a collection with the machine :

The TS steps are:

 

1)- Install Deployment Tools

Sysprep

2)- Prepare ConfigMgr Client for Capture

3)- Prepare OS

4)- Restart Computer

"The currently installed default operating system." is checked

5)- Capture Operating System Image

 

So it is still complaining that the Install Deployment Tools should be run in Full OS(from the SMSTS.log file)!!!, was it not the set "The currently installed default operating system" in the restart which should do this or there is(are) other(s) parameter(s) to set???

Is the step too late in the TS? it was the order advised to me on technet????

 

Could I use the same CD to boot from for the TS "Build & Capture" and "Capture ONLY"? Does the CD should get some different information between these two TSs?

(I am using the same so far to be sure the drivers are okay as it works for "Build & Capture")

 

The boot from CD is a step 0 before step 1 so the machine is picking the TS assigned....

Any other way to proceed... I could not get PXE... NETWORK FIGHTING

 

As I have remove the workstation from the domain to make the 'Build and Capture' TS to work

http://social.technet.microsoft.com/Forums...27-2b5eb8a11d85

http://social.technet.microsoft.com/Forums...39-521ed45ba2bc

 

should I rejoin the domain before running the capture step 0? step 1?

Thanks,

- Dom

Share this post


Link to post
Share on other sites

  • 0
to properly test DNS do a nslookup,

 

paste the results of that here

 

cheers

anyweb

hi Any,

 

Here we go

 

C:\_SMSTaskSequence\WinPE\Windows\System32\config>nslookup

Default Server: addcmco1.ad.medctr.ucla.edu

Address: 10.2.19.172

 

> exit

 

C:\_SMSTaskSequence\WinPE\Windows\System32\config>nslookup configmgrsrv

Server: addcmco1.ad.medctr.ucla.edu

Address: 10.2.19.172

 

Name: configmgrsrv.ad.medctr.ucla.edu

Address: 10.2.19.6

 

 

C:\_SMSTaskSequence\WinPE\Windows\System32\config>

Still getting error 0x00000032 ??

 

Thanks,

- Dom

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.