Jump to content


mdoupe

Distribution Point failure - Cannot OSD anything

Recommended Posts

Hi all,

 

A while ago we had to shut down WDS on all of our DP's due to a task being sent out to the wrong machines. When we started WDS up again, one of our DP's would not start the WDS service. I ended up removing the role and content from the DP and the DP's site server from SCCM and starting from scratch.

 

Now when I try to OSD a machine in that building it fails with the following error:

Windows Boot Manager

Windows failed to start. <bla bla bla>

    File: \Boot\BCD

    Status 0xc000000f

    Info: An error occurred while attemptint to read the boot configuration data.

If I take the machine to another building, it images fine. Imaging also worked fine before restarting WDS.

 

When I look at the SMSPXE.log of the DP during a netboot, I see the following (I have attached the full log as well):

[010.013.010.001:4011] Recv From:[010.013.130.191:68] Len:283 1635e70
MAC=08:2E:5F:22:7D:F1 SMBIOS GUID=97035800-4440-11E1-0000-082E5F227DF1 > Received DHCP Request
Set media certificate in transport
Set authenticator in transport
Set authenticator in transport
failed to receive response with winhttp; 80072ee2
Failed to get information for MP: http://CM.mydomain.com. 80072ee2.
PXE::DB_InitializeTransport failed; 0x80004005
PXE::DB_LookupDevice failed; 0x80004005
Set media certificate in transport
Set authenticator in transport
Set authenticator in transport
failed to receive response with winhttp; 80072ee2
Will retry in 5 second(s)
Retrying...
failed to receive response with winhttp; 80072ee2

<snip>

End of retries
failed to send the request
Failed to send status message (80072ee2)
Failed to send the status message
PXE::DB_ReportStatus failed; 0x80072ee2
PXE Provider failed to process message. 
Unspecified error (Error: 80004005; Source: Windows)
failed to receive response with winhttp; 80072efe
End of retries
failed to send the request
PXE::DB_LookupDevice failed; 0x80072efe

Also possibly related but when I check the content library with ContentLibraryExplorer.exe all of the regular content checks out except for MSC00001 and MSC00002 (The configuration manager client package) which show as "(PENDING)"

 

Thanks in advance for any help you can give!

 

 

Edit: This is SCCM2012, no SP1, no R2.

SMSPXE-error.log

Share this post


Link to post
Share on other sites

distmgr.log shows "Failed to start DP health monitoring task for package 'XY100001'. Error code: -1"

Configuration Manager Client Package is still in progress.
but I can't find a file called 'Microsoft' or 'Program'.
Problem has started after installing CU3 for SCCM 2012 SP1.

Share this post


Link to post
Share on other sites

Okay, i found the file which cause the problem. It was called System. After renaming to System.old I was able to update the distribution point again and everything was fine.

 

So if you've this problem too, follow the above posted link and search for a file named 'Microsoft', 'Program' or 'System' and rename it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.