Jump to content


rsrushi

Established Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by rsrushi

  1. Hi Lucid, Thanks for your reply. I am not using any commands. I have created task sequence for the OSD & using it through pxe. Task sequence doesn't have a task for "Format & Partition Disk" I have set the targate for restore image on Disk 0, Partition 1 in the "Apply Opereting System Image" task. Thats it. As I have set Disk 0, Partition 1 I assume that its wiping out the 100 MB partition & starting to restore image on it (Which I dont aspect), & TS getting failed with no space error. My aceptetion is that it should detect the primary (active/boot) partition & restore the image on it.
  2. Hello All, I am creating a task sequence that will only format C drive & install OS. I followed forum http://www.windows-noob.com/forums/index.php?/topic/2736-how-to-retain-old-hdd-structure/ . Now everything is going fine till wipe out C Drive, when it start to apply image step, the task sequence gets failed & gives error code 0x80070070. I assume that it’s considering system partition (100 MB system partition which is automatically created while we install OS using CD) as C drive & trying to wipe it and apply OS on it. If my guess is correct then off-course the TS will be failed with the space issue. Please help me how can I clear my doubt & resolve this issue….. Thanks!
  3. Hi All, Recently I have installed SCCM 2007 R3 & configured Asset Intelligence. Configuration is as below- Enabled Asset Intelligence Enabled following classes – SMS_installedsoftwares, SMS_InstalledSoftwareMS, SMS_InstalledExecutables, SoftwareLicensingService, SoftwareLicensingProduct. Installed Asset Intelligence synchronization point & downloaded catalogue. I have not done any changes to SMS_Def.mof assuming that it will automatically get updated as we enable the classes while enabling the Asset Intelligence I have modified configuration.mof file as below – CALCollectionType = 3; //0-Disabled, 1-User CAL, 2-Device CAL, 3-All CALCollectionFrequencyDays = 0;CALCollectionFrequencyMinutes = 60; CALCollectionTimeWindow = 90; CALCollectionSupportedWindowsVersions = "5.0,5.2,6.0"; My problem is when I run report license 14A Microsoft Volume Licensing Reconciliation Report, it shows me all the information correctly, but only the Inventory count column is showing value 0 (zero) for all the products. Thanks in advance ! Rushikesh
  4. HI, Thanks for the link, If I enable the CCM_CALTRACKING in .mof file how can I find information related to this inventory? Thanks Rushikesh
  5. Hi all, I just want to know can SCCM 2007 R3 support License management. Like how many licences are available, how many used & activated If yes can anyone please share the link from where I can get the documentation for it...? Thanks in advanced… Rushikesh
  6. Dear friends, I am implementing new SCCM site server. I just want to know that how can I set source location for client installation in client push installation properties. I searched on forums & i found multiple properties like defaultmp:, sitecode:, etc. When we install client manually with ccmsetup.exe then we can use option "/source:<location of client.msi>" I just want to set the same thing in CLIENT tab of client push installation properties settings.... Can somebody help me in this........ Thanks in advanced....!!! Rushikesh
  7. Hi all, Can anyone please provide the information on below points. 1) If software inventory or hardware inventory feature is enabled in SCCM then how much network bandwidth will be utilized in this process? 2) Can we use software licence management in SCCM, like how much total licences are available, how much is used & how much are free. Thanks in advance Rushikesh
  8. Hi Eswar, Thanks..! Sorry Actually for some reason i will not be able to check this for some days....I will check it soon & update the status here..... Bye .....
  9. Hi Trevor, Thanks for the reply...! OK, but the client is not getting installed on the machine, can you please suggest how can i troubleshoot this issue. The ccmsetup.exe is constantly showing in the task manager.....
  10. Hi, I am new on SCCM. I am installing SCCM in lab environment for testing. I have configured basic setting as below…. 1) Ip address range boundary 2) Client push installation is enabled 3) Client push account is a member of domain admin, enterprise admin, schema admin & also member of local admin on client system. I am trying client push installation, the ccmsetup.exe is constantly showing in task manager on client system & client is not gatting installed. Client system is Windows Xp Sp2. I cjecked log file at C:\windows\system32\ccmsetup\ccmsetup.log, its showing as “Client OS is not a supported Windows Embedded Platform”. Can you please help me out to resolve this issue…… Log file is as below…. ******************************************************************************************************************************************************************** ==========[ ccmsetup started in process 408 ]========== ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Version: 4.0.6487.2000 ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) CCMHTTPPORT: 80 ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) CCMHTTPSPORT: 443 ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) CCMHTTPSSTATE: 0 ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) CCMHTTPSCERTNAME: ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) FSP: SCCMSRV01.MYPROJECT.COM ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) CCMFIRSTCERT: 0 ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Config file: C:\WINDOWS\system32\ccmsetup\MobileClient.tcf ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Retry time: 10 minute(s) ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) MSI log file: ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) MSI properties: INSTALL="ALL" SMSSITECODE="PUN" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="SCCMSRV01.MYPROJECT.COM" CCMFIRSTCERT="0" ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Source List: ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) \\SCCMSRV01.MYPROJECT.COM\SMSClient ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) \\SCCMSRV01\SMSClient ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) MPs: ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) SCCMSRV01.MYPROJECT.COM ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) Sending Fallback Status Point message, STATEID='100'. ccmsetup 11/22/2011 7:53:09 PM 1912 (0x0778) MSXML 6.0 not available, failing over to lower version. FSPStateMessage 11/22/2011 7:53:09 PM 1912 (0x0778) MSXML 6.0 not available, failing over to lower version. FSPStateMessage 11/22/2011 7:53:09 PM 1912 (0x0778) State message with TopicType 800 and TopicId {D32439F4-6D84-40AE-A4F7-6BCB43FEA8E5} has been sent to the FSP FSPStateMessage 11/22/2011 7:53:09 PM 1912 (0x0778) Running as user "SYSTEM" ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Detected 18442 MB free disk space on system drive. ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) DetectWindowsEmbeddedFBWF() Detecting OS Version ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Client OS Version is 5.1, Service Pack Version 2 ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Client OS is not a supported Windows Embedded Platform ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Deleted file C:\WINDOWS\system32\ccmsetup\client.msi ccmsetup 11/22/2011 7:53:09 PM 1160 (0x0488) Successfully ran BITS check. ccmsetup 11/22/2011 7:53:11 PM 1160 (0x0488) IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\ccmsetup.cab' is MS signed. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Successfully extracted manifest file C:\WINDOWS\system32\ccmsetup\ccmsetup.xml from file C:\WINDOWS\system32\ccmsetup\ccmsetup.cab. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) MSXML 6.0 not available, failing over to lower version. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Loading manifest file: C:\WINDOWS\system32\ccmsetup\ccmsetup.xml ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Successfully loaded ccmsetup manifest file. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Couldn't get directory list for directory 'http://SCCMSRV01.MYPROJECT.COM/CCM_Client/ClientPatch'. This directory may not exist. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Adding file 'http://SCCMSRV01.MYPROJECT.COM:80/CCM_Client/i386/msxml6.msi' to BITS job, saving as 'C:\WINDOWS\system32\ccmsetup\msxml6.msi'. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Adding file 'http://SCCMSRV01.MYPROJECT.COM:80/CCM_Client/i386/msrdcoob_x86.exe' to BITS job, saving as 'C:\WINDOWS\system32\ccmsetup\msrdcoob_x86.exe'. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Adding file 'http://SCCMSRV01.MYPROJECT.COM:80/CCM_Client/i386/wimgapi.msi' to BITS job, saving as 'C:\WINDOWS\system32\ccmsetup\wimgapi.msi'. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Adding file 'http://SCCMSRV01.MYPROJECT.COM:80/CCM_Client/i386/client.msi' to BITS job, saving as 'C:\WINDOWS\system32\ccmsetup\client.msi'. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Couldn't get directory list for directory 'http://SCCMSRV01.MYPROJECT.COM/CCM_Client/i386/00000409'. This directory may not exist. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Starting BITS download for client deployment files. ccmsetup 11/22/2011 7:53:41 PM 1160 (0x0488) Download Update: 2852168 out of 20699464 bytes transferred. ccmsetup 11/22/2011 7:53:43 PM 1160 (0x0488) Successfully completed BITS download for client deployment files. ccmsetup 11/22/2011 7:53:53 PM 1160 (0x0488) Successfully downloaded client files via BITS. ccmsetup 11/22/2011 7:53:53 PM 1160 (0x0488) Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 11/22/2011 7:53:53 PM 1160 (0x0488) ccmsetup is shutting down ccmsetup 11/22/2011 7:54:11 PM 1912 (0x0778) ****************************************************************************************************************************************************************************** Thanks in advanced !!!!! Rushikesh.. :) :)
  11. Hi, I am new on Sccm. I am installing sccm in lab environment for testing. i have installed & configured all basic settings as below 1) Ip Address range boundary 2) Client push Installation is enabled. 3) Client push installation account is a member of domain admin & member of local administrator on client system. I am trying client push installation, the ccmsetup.exe is constantly showing in task manager on client machine & client is not getting installed. i checked log file at C:\windows\system32\ccmsetup\ccmsetup.log its showing as "Client OS is not a supported Windows Embedded Platform". Can you please help me out to resolve this issue......... Log file is attached for your reference....... Thanks in advanced !!!!!!!!!!!! Rushikesh.. :) :)
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.