Skip to content

SCCM 2012 R2 Wake on lan Proxy

Featured Replies

I am trying to set up a Windows 20012 Core server as Client running the WOL Proxy I have got it working on a different subnet using three Windows 7 computers and it works but when I install the Client on the server it loads the WOL proxy and it stays installed for about 2 hours then SCCM uninstalls it. Sample logs below any ideas why it would uninstall the Wol Proxy

 

Sleep agent log

============ Start wakeup proxy service ============= SleepAgent 3/27/2014 2:45:31 PM 6 (0x0006)
Initialize wakeup proxy service SleepAgent 3/27/2014 2:45:31 PM 6 (0x0006)
Start to initialize all services SleepAgent 3/27/2014 2:45:41 PM 6 (0x0006)
Processor Monitor INITIALIZED SleepAgent 3/27/2014 2:45:48 PM 6 (0x0006)
Ping Service INITIALIZED SleepAgent 3/27/2014 2:45:48 PM 6 (0x0006)
WOL Check: NeedWolTesting=False, WolSuspect=False SleepAgent 3/27/2014 2:45:48 PM 6 (0x0006)
Create local machine instance SleepAgent 3/27/2014 2:45:48 PM 6 (0x0006)
Detect and fill active IP/MAC addresses SleepAgent 3/27/2014 2:45:48 PM 6 (0x0006)
SetWakeOnMagicPacketOnly: Setting Wake on Magic Packet only for all interfaces. SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
SetWakeOnMagicPacketOnly: Configuring adapter PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\FF5650000E57A6FE00_0 SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
EnableWakeOnMagicPacketOnly already true, no need to reconfigure SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Starting to determine the primary network adapter SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
.NET API reported "2" network interfaces. SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Examine adapter "Ethernet 3" SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
vmxnet3 Ethernet Adapter SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
DisableARPandNDOffload: PMARPOffload before: 0 SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
DisableARPandNDOffload: PMNDOffload before: 0 SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Examine adapter "Loopback Pseudo-Interface 1" SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Normal card in non Hyper-V environment: "Ethernet 3" SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
IP address is "205.121.139.9" SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Found a suitable network card at initialization SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
PowerPlatformRole: PlatformRoleDesktop SleepAgent 3/27/2014 2:45:49 PM 6 (0x0006)
Scheduling roll call in 83650 seconds SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
State Manager INITIALIZED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Starting on UDP port 25536 SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Bind to local address "205.121.139.9" for message channel. SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Udp Service INITIALIZED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Register sleep event handler SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Registered for sleep events SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
WMI Event Prcessor INITIALIZED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Proxy Service INITIALIZED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Probe Manager INITIALIZED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Completed initialization SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Register network change handler SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Run the service SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Start all services SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Processor Monitor STARTED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Ping Service STARTED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Becoming a guardian ... SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Create Power Request: Your machine is currently acting as a network guardian SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Set Power Request SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
LastRollCallStart day: 1 (expected: 86) SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Cleared our list of machines. Reason: Missed roll call SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
State Manager STARTED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
Udp Service STARTED SleepAgent 3/27/2014 2:45:50 PM 6 (0x0006)
WMI Event Prcessor STARTED SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
Start binding to a ssnps adapter. SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
#ParserCallback: StatusCode = 2197848070, Description = sparser.npb:001.000 Successfully unserialized NPL parser 'C:\Windows\CCM\NetMonParsers\Profiles\2D37DAAD-2AE1-42CF-B7CB-A4313A43F845\sparser.npb., MsgType = Information. SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
#Loaded Npl sets. SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
ssnps reported 2 adapters. SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
Successfully bound to a ssnps adapter 0 with the name "Ethernet 3" SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
End binding to a ssnps adapter. SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
Proxy Service STARTED SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
Probe Manager STARTED SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
All services STARTED SleepAgent 3/27/2014 2:45:51 PM 6 (0x0006)
Stop requested SleepAgent 3/27/2014 2:48:43 PM 13 (0x000D)

 

CCMExec.log

Check and install Wakeup Proxy hotfix CcmExec 3/27/2014 3:15:46 PM 3872 (0x0F20)
Retry Wakeup Proxy install/uninstall #1 CcmExec 3/27/2014 3:15:46 PM 3872 (0x0F20)
Wakeup Proxy disabled, service installed -> Remove service CcmExec 3/27/2014 3:15:46 PM 3872 (0x0F20)
CFirewallManager: Successfully deleted wake-up proxy firewall rule 'ConfigMgr Wake-up Proxy' CcmExec 3/27/2014 3:15:47 PM 3872 (0x0F20)
Wakeup proxy service stopped successfully
CcmExec 3/27/2014 3:16:02 PM 3872 (0x0F20)
Uninstall wakeup proxy service "msiexec.exe /L* "C:\Windows\CCM\Logs\wakeprxy-uninstall.log" /quiet /uninstall {80E2D04F-30CE-47B7-8413-1EB00351B848}" CcmExec 3/27/2014 3:16:02 PM 3872 (0x0F20)
Run command "C:\Windows\system32\msiexec.exe /L* "C:\Windows\CCM\Logs\wakeprxy-uninstall.log" /quiet /uninstall {80E2D04F-30CE-47B7-8413-1EB00351B848}" CcmExec 3/27/2014 3:16:02 PM 3872 (0x0F20)
"C:\Windows\system32\msiexec.exe /L* "C:\Windows\CCM\Logs\wakeprxy-uninstall.log" /quiet /uninstall {80E2D04F-30CE-47B7-8413-1EB00351B848}" completed successfully CcmExec 3/27/2014 3:16:26 PM 3872 (0x0F20)
Sending State Message with topic type = 2100, state id = 1, run state = 0, and error code = 0x00000000 CcmExec 3/27/2014 3:16:26 PM 3872 (0x0F20)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.