Skip to content

SCCM Client Active=No

Featured Replies

Hi All,

 

I'm having an issue with the SCCM client. Our environment is SCCM 2007 r3, Clients are Windows 7 Enterprise 32-bit.

 

I run a task sequence which installs an existing image package. The task restarts the client in PE, partitions the drive, installs the WIM, applies drivers, adds to the Domain, installs the SCCM Client and configures the client machine.

 

Once the Task has completed for some reason the Client and SCCM server don't communicate. After a little time, I update the update Collection Membership and the client show's Active=NO. At which point I can't apply advertisements.

 

Any help would be greatly appreciated.

Hi All,

 

I'm having an issue with the SCCM client. Our environment is SCCM 2007 r3, Clients are Windows 7 Enterprise 32-bit.

 

I run a task sequence which installs an existing image package. The task restarts the client in PE, partitions the drive, installs the WIM, applies drivers, adds to the Domain, installs the SCCM Client and configures the client machine.

 

Once the Task has completed for some reason the Client and SCCM server don't communicate. After a little time, I update the update Collection Membership and the client show's Active=NO. At which point I can't apply advertisements.

 

Any help would be greatly appreciated.

 

 

What have you been done on this (basic Troubleshootings steps) ? You will have to check ccmsetup.log for scucessful installation of Client if it is okay .Check clientlocation.log and locationservices.log as well for other info .

 

Check this link for basic steps to check. http://eskonr.com/2010/11/smssccm-clients-installation-troubleshooting-check-list/

  • Author

What have you been done on this (basic Troubleshootings steps) ? You will have to check ccmsetup.log for scucessful installation of Client if it is okay .Check clientlocation.log and locationservices.log as well for other info .

 

Check this link for basic steps to check. http://eskonr.com/2010/11/smssccm-clients-installation-troubleshooting-check-list/

 

Hi Eswar,

 

Thanks for the reply.

 

Ok I have checked the logs.

 

CCMsetup.log - Installation Succeeded.

clientlocation.log - No failures or Errors

locationservices.log - Had warnings and failuers. See bellow........

 

Failed to resolve 'SMS_SLP' to IP address from WINS LocationServices 18/12/2010 2:28:46 PM 3172 (0x0C64)

LSGetSLP : Failed to resolve SLP from WINS, is it published LocationServices 18/12/2010 2:28:46 PM 3172 (0x0C64)

LSGetManagementPointForSiteFromSLP : Unable to get the list of SLPs LocationServices 18/12/2010 2:28:46 PM 3172 (0x0C64)

Failed to retrieve Default Management Point from SLP LocationServices 18/12/2010 2:28:46 PM 3172 (0x0C64)

Failed to resolve 'NLB_TSS' to IP address from WINS LocationServices 18/12/2010 2:29:23 PM 3172 (0x0C64)

Failed to resolve 'MP_TSS' to IP address from WINS LocationServices 18/12/2010 2:29:56 PM 3172 (0x0C64)

Failed to retrieve default MP through WINS. LocationServices 18/12/2010 2:29:56 PM 3172 (0x0C64)

Failed to resolve 'SMS_SLP' to IP address from WINS LocationServices 18/12/2010 2:31:33 PM 1412 (0x0584)

LSGetSLP : Failed to resolve SLP from WINS, is it published LocationServices 18/12/2010 2:31:33 PM 1412 (0x0584)

LSGetManagementPointForSiteFromSLP : Unable to get the list of SLPs LocationServices 18/12/2010 2:31:33 PM 1412 (0x0584)

Failed to retrieve Default Management Point from SLP LocationServices 18/12/2010 2:31:33 PM 1412 (0x0584)

Failed to resolve 'NLB_TSS' to IP address from WINS LocationServices 18/12/2010 2:32:06 PM 1412 (0x0584)

Failed to resolve 'MP_TSS' to IP address from WINS LocationServices 18/12/2010 2:32:45 PM 1412 (0x0584)

Failed to retrieve default MP through WINS. LocationServices 18/12/2010 2:32:45 PM 1412 (0x0584)

Unknown task LSProxyMPModificationTask in non-quarantine - ignoring. LocationServices 18/12/2010 2:32:45 PM 2412 (0x096C)

Failed to open to WMI namespace '\\.\root\ccm' (8007045b) LocationServices 18/12/2010 2:33:34 PM 1412 (0x0584)

Failed to open to WMI namespace '\\.\root\ccm\LocationServices' (8007045b) LocationServices 18/12/2010 2:33:34 PM 1412 (0x0584)

Failed to open to WMI namespace '\\.\root\ccm\policy\machine' (8007045b) LocationServices 18/12/2010 2:33:34 PM 808 (0x0328)

 

Might be also worth noting that the clients end up with a 169 APIPA address. Then once I reboot the clients they obtian a DHCP lease and I then update the ALL SYSTEMS collection and the same client appears twice. One which is active and one which is not.

 

Thanks for you help with this.

  • Author

I have posted the same question on Technet. If anyone is interest I have some answers here.

 

Thanks.

 

Answer

  • 5 months later...

On the Clients - Control Panel , CM (32) , Actions TAB, Discovery Data Collection Cycle , highlight by clicking, Initiate Action

 

Then depending on the Heartbeat Discovery Period , it should appear.

 

I only noticed this today also that all except for the SCCM server are showing as NO, doing the above steps should that work is not a solution when you cant be going around each client workstation do to it.

 

Note: I have previously disabled Windows Fireall via GPO on workstations, so it cant be firewall, even the Kaspersky Client on the workstations shouldnt be able to interfer IMO.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.