Skip to content

MDT Task Sequence Fails

Featured Replies

After finally getting a client computer to pxe boot I set up a task sequence in MDT 2010. After booting, the pc gets no connection at all to MDT. I get a screen that reads, "Microsoft Accelerators", then the screen disappears and the pc attempts a normal boot. I have followed the Lite Touch Install guide and have checked to make sure I had left nothing out.

I am attempting to capture an image of an XP machine. We are running Server 2008 r2. Any suggestions would be appreciated.

  • 3 months later...

After finally getting a client computer to pxe boot I set up a task sequence in MDT 2010. After booting, the pc gets no connection at all to MDT. I get a screen that reads, "Microsoft Accelerators", then the screen disappears and the pc attempts a normal boot. I have followed the Lite Touch Install guide and have checked to make sure I had left nothing out.

I am attempting to capture an image of an XP machine. We are running Server 2008 r2. Any suggestions would be appreciated.

 

When you are at the Microsoft Accelerators" screen, please press F8 to open a command prompt. If you type Trace32, you should be able to open the log viewer. From there, you can look for any logs that might help you track down the problem.

I think that you don't have any network drivers for that computer model loaded in the MDT. But I can't be sure unless you find some logs.

  • 2 months later...

I agree with thadkew. I had this same issue and it's almost always been the fact that I didn't have the right NIC drivers for the hardware. Try that using DISM and see if it helps.

  • 7 months later...

sounds like a network driver issue to me, winpe runs startnet.cmd and fails? so reboots.

Also, daft as it sounds, not having the machine patched into the network produces the same results if the NIC state is down!

 

Aaron

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.