Skip to content

Pxe boot Issues...

Featured Replies

Hi All,

 

This topic may have been covered before but i couldn't find anything whilst searchinbg the site, so please bare with me.

 

I currently have WDS 2010 configured on a 2008 R2 server. I have also go MDT installed on the same server, for which i have used to create my Lite touch WindowsPE boot.wim file.

 

For testing purposes i have pxe booted a Virtual Machine with windows 7 from my WDS server which worked perfectly. I then loaded the Lite touch WindowsPE boot.wim file onto a bootable usb which aslo perfectly installed Windows 7 from my WDS server.

 

Now the issue i have comes when i try and pxe boot directly from the on-board NIC on a HP ProBook 6460b. Pxe just sits there churning away and not picking up a dhcp address.

 

I have checked that pxe is enabled in the bios, i have configured the dhcp option 67 in my DHCP scope, i have also configured the following settings (See attachment)

 

Any help would be greatly appreciated as i'm really stuck at the moment.

 

Thanks

Jason

post-15697-0-28523800-1334834453_thumb.png

  • 3 weeks later...
  • Author

problem solved after much head ache!

 

I configured an 'IP helper address' for my wds server on the data Vlan of my switches.

I also configured dhcp options 66 and 67.

 

It works a treat now.

 

 

*Can a moderator close this post*

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.