theoldgoat

April 19, 2012

And I wouldn't put the file you are copying into the REMINST folder either, I created a separate share for the images (and other customisations)

April 19, 2012

Turns out I also have this problem and I worked around it by using my own administrator account. :unsure:

I've compared the permissions of my own admin account with the SCCM Network Access account and they are exactly the same, so not sure why it's not working.

April 16, 2012

Some help with this would really be appreciated!

April 16, 2012

Never mind, I just run the command in my ts and it worked fine.

April 16, 2012

We are having similar issues with CCMsetup not installing on some PC's while it installs happily on others, there seems to be some inconsistency here as we have deployed the same image on all the same spec machines. I am not sure if this is related. We have tried all the suggestions from various forums, but with very little success. Our deployment varies in that we use WDS\MDT to push out our images, we are just starting to use SCCM.

What method are you using to install the client?

April 16, 2012

- enter unc path to directory .wim file is to be written to

Are you actually giving the file a name? ie UNC path + image.wim

April 10, 2012

Sorry I should have said I edited the WIM to include this file. Should I have edited this file BEFORE I captured my image?

Thanks.

April 10, 2012

I have edited this file within my WIM image so that it does a couple of things after the Setup Windows and ConfigMgr step in my task sequence, but when I build a machine using my ts the file is never there. For example if I just include the line:

%windir%\system32\slmgr.vbs /ato

in the file, I would expect it to activate Windows for me. However when I start the machine the SetupComplete.cmd file is replaced with one that just contains this line:

%windir%\system32\osdsetuphook.exe /execute

I can't understand why this is happening, but think it has something to do with sysprep (is this done again at some point??).

If someone could explain to me why this file is being replaced I would appreciate it. Again I couldn't really find anything on searching the internet that I didn't already know.

Thanks very much.

April 10, 2012

I'm trying to remember the issues I had while doing this but can't really. I did get it to work but changed to capturing using a task sequence which I though was a better method, no discs involved.

April 10, 2012

Have you used the troubleshooting tool trace32 to look through your smsts.log file? There are detailed guides on here.

With that you should be able to identify the problem.

April 10, 2012

Hello everyone,

I still cannot get my task sequence to recognise that a drive is already encrypted with BitLocker. I have tried using anyweb's wsf to set a task sequence variable but I am not sure if this is working tbh and can't really see any way of checking this.

It is not a huge deal as currently what happens is the task sequence fails, I restart and pxeboot the machine again and then the task sequence runs the second time with no problems. I'm assuming this is because the hidden and encrypted partitions have now effectively become one again and on the second pxeboot the partition is now big enough to take the wim image. I can disable BitLocker from within Windows and then do it that way but I would prefer it the team here could just pxeboot and the ts would take care of everything.

What is the best and most reliable way to do this? I am open to all suggestions.

I have checked all the links on this site and on lots others so if someone could explain exactly what is happening here and why I would appreciate it.

January 20, 2012

Meh still not working.

In the event log for WDS there is this:

Log Name: Application

Source: WDSIMGSRV

Date: 20/01/2012 13:39:59

Event ID: 258

Task Category: (1)

Level: Error

Keywords: Classic

User: N/A

Computer: UK-EDN-V-SCCM-1.Capricornenergy.com

Description:

The description for Event ID 258 from source WDSIMGSRV cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

0xC1030104

Event Xml:

<Channel>Application</Channel>

<Computer>UK-EDN-V-SCCM-1.Capricornenergy.com</Computer>

</System>

</EventData>

</Event>

Anybody know what could be causing this?

January 20, 2012

There is no IP helper pointing to the PXE service point - because the clients are being built on a different VLAN this needs to be in place.

I just need to find the driver file now for the Dell T7500 that has this in it.

Cheers for the help!

January 20, 2012

Some more information on further tests this morning:

When I select "Update Distribution Points" the x86 image updates with no problems, but if I try this for either of the x64 images I get these errors:

  Error: Boot image to update:
Microsoft Windows PE (x64)
  Error: Actions to perform:
Add ConfigMgr binaries
Enable Windows PE command line support
Add drivers
  Success: Drivers that will be included:
Intel(R) Display Audio
ST Micro Accelerometer
Intel(R) Management Engine Interface
Bluetooth Hands-free Audio
Bluetooth L2CAP Interface
Bluetooth Remote Control
Dell Wireless 375 Bluetooth Module
Intel(R) Centrino(R) Advanced-N 6230
Intel(R) 82579LM Gigabit Network Connection
O2Micro Integrated MMC/SD controller
O2Micro Integrated MS/MSPRO/xD Controller
Dell ControlVault
Intel(R) ESB2 SATA AHCI Controller
Intel(R) HD Graphics Family
Intel(R) 82579LM Gigabit Network Connection
Intel(R) Active Management Technology - SOL
Intel(R) ESB2 SATA AHCI Controller
Intel(R) HD Graphics Family
Intel(R) Management Engine Interface
Intel(R) ESB2 SATA AHCI Controller
3Com Dual Port 1000-SX PCI-X Server NIC
NVIDIA Quadro FX 5600
DELL PERC 5/E Adapter RAID Controller
3Com Dual Port 1000-SX PCI-X Server NIC
NVIDIA High Definition Audio

  Error: Failed to import the following drivers:
LSI Adapter, SAS 3000 series, 4-port with 1064 - Failed to inject a ConfigMgr driver into the mounted WIM file

  Error: The wizard detected the following problems when updating the boot image.
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
The ConfigMgr Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
{
 Description = "Failed to insert OSD binaries into the WIM file";
 ErrorCode = 2152205056;
 File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
 Line = 4262;
 ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
 Operation = "ExecMethod";
 ParameterInfo = "SMS_BootImagePackage.PackageID=\"EDN00007\"";
 ProviderName = "WinMgmt";
 StatusCode = 2147749889;
};

Is there a problem with the LSI Adapter, SAS 3000 series, 4-port with 1064 driver with the x64 images

I have tried with a different PC this morning as well to see if I got a more meaningful error message from PXE boot and I got this:

PXE-T04 - Access Violation

PXE-E36 - Error receiving from TFTP server

PXE-M0F - Exiting Intel boot agent

Thanks

January 20, 2012

Thanks anyweb.

1. DHCP is on the DC, so elsewhere. This is a production environment. Unfortunately the guy who configured it all has left and I've taken over from him. The infrastructure was configured for an old SMS server I think and as far as I know the only change that has been made was Options 66 and 67 in DHCP being changed. Would the IP helper need to be changed as well - it would have to point to the new PXE server wouldn't it - I will need to check with comms that this has been done.

2. I will check this.

3. This was something I was concerned about. The two standard boot images are present (x64 and x86) but there is also a secondary custom x64 boot image with added NIC support. Is it ok for this to be there or should I delete one of the x64 boot images? All three have been distributed to the DP....

January 19, 2012

Some more information that I think may be useful:

The SCCM server is virtual, the clients are physical.

IP helpers are in place.

The server is running SCCM 2007 R3.

January 19, 2012

Hello,

Great forum, although I haven't been able to find the answer to my problem yet, although I'm sure it's here somewhere.

Whenever I try to pxeboot new clients I get an IP etc but move on to this error:

"Selected boot device failed.

Press any key to reboot."

I've done a SMSTrace on smspxe.log and whenever I attempt a network boot nothing is appended to the log which suggests that the server is not seeing the requests?

I currently have DHCP option 66 set to the SCCM server and option 67 set to reminst\smsboot\x64\pxeboot.com

I have tried this as wdsnbp.com instead, and also as x86.

Can somebody please help me troubleshoot this issue? Cheers

Sign In

theoldgoat

Posts

Joined

Last visited

Content Type

Profiles

Forums

Posts posted by theoldgoat

misleading error - 0x800704cf

misleading error - 0x800704cf

BitLocker in a refresh scenario

SetupComplete.cmd

WDS taking over? SCCM not doing anything?

misleading error - 0x800704cf

SetupComplete.cmd

SetupComplete.cmd

misleading error - 0x800704cf

misleading error - 0x800704cf

BitLocker in a refresh scenario

PXE boot problems

PXE boot problems

PXE boot problems

PXE boot problems

PXE boot problems

PXE boot problems

Browse

Activity

Important Information