TronixS

Hello there, we have Problems with our Enviroment but bevor i tell you what the Problem is here the Configuration, we build it on 2 Servers. The First Server is our Primary Server on VMWARE with following specs: 2 x 3,5Ghz 16GB RAM Windows Server 2008 R2 Standard with SP1 50GB (10GB free) Systemdrive 150GB SCCM (130GB free) Partition for the Configmanager self 500GB SCCM (225GB free) DP Drive. The Second Server is our SQL Server 2008 R2: 2 x 3,5Ghz 16GB RAM 50GB (10GB free) Systemdrive 50GB (35GB free) SQL DB Drive (DB Size is 5,5GB) 50GB (48GB free) SQL Logs Windows Server 2008 R2 Standard with SP1 Microsoft SQL Server Management Studio 10.50.2861.0 Microsoft Analysis Services Client Tools 10.50.2861.0 Microsoft Data Access Components (MDAC) 6.1.7601.17514 Microsoft MSXML 3.0 6.0 Microsoft Internet Explorer 9.0.8112.16421 Microsoft .NET Framework 2.0.50727.5466 Operating System 6.1.7601 What have we done: All goes fine and is running but befor we Update to SP1 (CU1) we had a low CPU Usage on our SQL Server. The CPU Usage is now most Time at 80-90% and there are two Process that this doing: SQLSERVR.exe ReportingServicesService.exe I think that we had forgotten a Update or Patch for our SQL Server but the Consulting does know it and has no Idea. In the Logfiles for ReportingServiceService are now 3GB on Logfiles, the files are written any permantley and are 32MB (yeep there are 109 Files) This is what are written there: library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:50:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to ListChildrenAction(/ConfigMgr_DMS/Administrative Security, True). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS/Administrative Security, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to ListChildrenAction(/ConfigMgr_DMS/Administrative Security, True). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS/Administrative Security, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to ListChildrenAction(/ConfigMgr_DMS/Administrative Security, True). library!ReportServer_0-44!1040!04/25/2013-07:45:51:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS/Administrative Security, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to ListChildrenAction(/ConfigMgr_DMS/Administrative Security, True). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS/Administrative Security, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to ListChildrenAction(/ConfigMgr_DMS/Administrative Security, True). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS/Administrative Security, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to ListChildrenAction(/ConfigMgr_DMS/Asset Intelligence, True). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS, PathBased). library!ReportServer_0-44!1040!04/25/2013-07:45:52:: Call to GetPropertiesAction(/ConfigMgr_DMS/Asset Intelligence, PathBased). I am not a SQL Specialist but that this is not normal i can see. Has anyone an Idea what this is or what i can do, the System a little bit Laggy. greetz and thx aaj

Hello, i have a little Problem with the Component Status. Some Secondary Site Server had a Hardware Failure and crashed down, so i must install them new. I´ve deleted the old Server Entry in the Site Settings, after a few Minutes i installed the Secondary Site new with the same Site Code. The Server becames a new Name because we have a new Nameconvention. All looks fine and the new Server is still running but in my System Status i´ve got a few Errors from the new installed Server, so i think but the Errors comes from the old crashed Server. How can i now delete the old entrys or better, how can i delete the old Server from Site System Status? with best regards and thx. André

Hi, what is the detailed error message? try this: join the selv-signed Cert to Trusted Root Certification and to Trusted Publisher on the Server.

Omg, we find it out. I deploy only StartupBuild for x86 but definitivly we need both, x86 and x64, after deploying of x64 the Clients runs directly. :-)

Hi, after a crash from wimgapi i try out to start WDS but nothing go on, so i reboot Server and still wait but same, WDS doesn´t start. So i read some post in a feew forums and nothing helps me out so do the default way: Advertisment delete from Startbuilder uninstall PXE Role from Server (logs look fine) uninstall WDS Role after finish reboot delete all logs of PXE´s delete all in C:\windows\temp delete D:\remoteinstall and wait some time. after a half hour i start to install WDS Role Reboot Server when install from WDS finished i install PXE Role (i doesn´t configure out WDS) the logs looks good and show me no errors. i reboot the server again after a few minutes. the REMOTEINSTALL SMSPXEIMAGES% is created from the installer now i put the winpe in the startupbuilds, wait for deploying in shares and it´s good. i try now to install a client with a Tasksequence an my startupbuild. the Client starts but hangs on Contacting Server:172.x.x.x and will neverending to show me DOTS. What is wrong, what i´ve forget? thank you and with best regards for help. André

Hi, we create with build and capture own Images from Windows 7 and deploy them to Desktop PC and all looks fine and greate there, published Apps would be automaticly install. Now my Problem: I deploy the same Image on LAPTOP´s and first all looks great, the Tasksquenze install all what is defined but if all ready nothing go one. Windows 7 is installed, a feew apps from the tasksequenz and thats it. But the config Manager Client say that the sitemode is UNKNOWN, this problem is only an Laptops and nothing go on. If i uninstall with "ccmsetup.exe /uninstall" and reinstall with "ccmsetup.exe" (no parameters) and wait a feew second all looks great, the Sitecode is automaticly as mixed mode. Really, i do this all with the same IMAGE. can anyone help me?? thx and with best regards. André

Hello, i would like to use SCUP for SCCM 2007 (r2) but i have a little Problem with the Installation. I read the technet but i don´t really know where i can install it? Is there a better manual or how to? Can i install SCUP himself on a workstation and then deploy third-party updates from there to the Server or would the clients take the updates for TP from the client self? thank you for help and with best regards. André

Hi, last weekend we had a Problem with our Server, from 4 HD´s crashed 2 and this is fatal for a RAID 5. Our OS is installed on a seperated Disk wo is is running with Raid 1. The OS is on C: (RAID 1) and the Shares on D: (RAID 5) I insert 2 new HDs and change from RAID 5 to RAID 10. I uninstall all from SCCM 2007, clean the Registry and delete all fragments of SCCM. After reboot now i installed SCCM 2007 new with SP2 and R2 then i restore our Backup form the SQL and all looks like fine (so i thinking) but my DP build is going halfway. Some Package are now copied but 1 Package is copying for 24hours and i don´t now why. what can i do? thank you.

omg, this was my fault, after installing the first package the folder would be created. sorry for post.

Hello, i must install 7 Secondary Site and my first and second Servers are running fine an booth DP syncronized with the Parent. Now i have a Problem and can not find out what is going on because my logs are looking good, for me. On my HD i missing two Folders SMSSIG$ and SMSPKGD$ and in IIS at default Website i am missing too SMDS_DP_xxxxx and SMDS_DP_SMSSIG$. What is my fault? I checked all trusts with the first booth server an looking the same and the Server is reachable from the Parent with no error logs. thank you very well. greetz andré

Hi, i´ve try out the SCCM Guide for USMT but i have no Idea how i can exclude (scanstate) User older 90 Days or to disable to backup the local Admin. i would like to disable a few Folders on Drive C: to backup but i don´t know how to? with loadstate i have a Problem too, the Log show me up that i have not enough Storage. Error Code is 8007000e. Can anyone help me. thank you well and with best regards. André

thank you well for the great information rofl. really i love it.

Hello, we must change the IP Adress from our SCCM2007 Server because we are redesign our Networkinfrastructur. we would change from 172.16.x.x to 172.26.x.x and correct them in our DNS but are there any other Problems with our Client or DP Server out on the wild?! Thank for information. Number 5 said: I need more Input, i am too

Okay, thanks for comment but how? is there a little tutorial where i can looking for?! i have tried you said but it doesn´t run and i don´t find my error. let me explain how i will it do in the theorie i deploy one W7 X86 and insert there variables (but how they must set??) and have 3 Domains: TEST1 TEST2 TEST3 after installation i moved the first PC to TEST and now he should be insert in the Domain or is there a easier or better way to do this?!

Hi, can anyone tell me how i can install Machines with W7 for different Domains. the idea is that i not insert the Credentials in the Deployment Pack for W7, i would try to do this for more as one Collection with the own Domain. i hope anyone understand what i will do .