[Printers Serials]

Cannot discover printer serial numbers??

 

How can i force SCCM to get printers serial and create a report for that

 

thank you

 

[Your computer is about to restart]

Yes, ZeZe

why ??

any one have ideas?

[Your computer is about to restart]

Your computer is about to restart. xx:xx:xx remaining before your computer restarts automatically. Your computer must restart to complete the installation of applications and software updates.

 

 

 

i want change it to manually restart (admin responsibility), can I???

 

 

 

 

 

[require client check passed active]

require client check passed active error with any required deployment ???

what is that?

[SCCM 2012 R2 SP1-CU2 _ WDS error]

Solution:

Repair this SVCHOST.EXE

i think it happed because of update or something like that so i need to Re-Register Windows Update DLLs

 

• Click on Start, Run, and type CMD and click ok
• In the black command window type the following command and press Enter
  
  REGSVR32 WUAPI.DLL
• Wait until you receive the "DllRegisterServer in WUAPI.DLL succeeded" message and click OK
• Repeat the last two steps above for each of the following commands:
  
  REGSVR32 WUAUENG.DLL
  REGSVR32 WUAUENG1.DLL
  REGSVR32 ATL.DLL
  REGSVR32 WUCLTUI.DLL
  REGSVR32 WUPS.DLL
  REGSVR32 WUPS2.DLL
  REGSVR32 WUWEB.DLL

[SCCM 2012 R2 SP1-CU2 _ WDS error]

SCCM 2012 R2 SP1-CU2

"event 1000"
Faulting application name: svchost.exe_WDSServer, version: 6.3.9600.17415, time stamp: 0x54504177
Faulting module name: ntdll.dll, version: 6.3.9600.18146, time stamp: 0x5650b9bb
Exception code: 0xc0000374
Fault offset: 0x00000000000f12e0
Faulting process id: 0x2254
Faulting application start time: 0x01d147ac751f914d
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: c798faaf-b39f-11e5-80d2-001e68da601d
Faulting package full name:


==============================

- uncheck PXE
- delete all content
- restart
- delete remoteinstall folder
- remove DP
-restart
- install DP
-enable pxe
-distribute boot.wim again

Service WDS still restarting with the same error

 

=================================


found the issue but i don't know how to solve it

=="enable unknown computer support"==

when i check these feature the error is appear

i don't know why ???

 

[Task Sequence On Old machine]

i want to create TS :

- doesn't format any volume except C drive

- activate OS

[Task Sequence On Old machine]

Task sequence

noob.zip

[Task Sequence On Old machine]

no

i do not

[Task Sequence On Old machine]

i deploy OS on pc in my company network

each time system reserved take drive letter

???

 

[Task Sequence On Old machine]

no way

i test many tim, remove system reserve letter and deploy TS but it takes letter after TS completed

 

the only way that i delete system reserve beore Deployment start

????

any idea

[Task Sequence On Old machine]

win 7 ENt

c drivr

[Task Sequence On Old machine]

ok

may i try to use the default image with OSDPreserveDriveLetter

[Task Sequence On Old machine]

No

I use a capture Image not install.wim

should i use the default install.wim???

[Task Sequence On Old machine]

Hi all

 

I want to deploy WIn7 OS on my Old machines without partitioning or format other volumes whatever number of these volumes

So i delete format disk from task sequence

 

But each time the system reserve take letter

And if the number of volumes was more than 2 the letters changed to gather

I want to deploy WIn7 OS on my Old machines without partitioning or format other volumes whatever number of these volumes

So i delete format disk from task sequence

 

But each time the system reserve take letter

And if the number of volumes was more than 2 the letters changed to gather

 

 

 

 

[How can I dynamically deploy multiple operating systems with System Center 2012 R2 Configuration Manager ?]

as i said in the first i was not able to run TS

i create new TS and copy and past your TS.Zip task sequence and then deploy it <<< OK

 

 

Enable HTA support to the boot wim and re distribute

 

it is Run and gather info and then restart with the error boot failure. Reboot and select proper boot device or insert boot media in selected boot device

[How can I dynamically deploy multiple operating systems with System Center 2012 R2 Configuration Manager ?]

make work around and run task sequence

and the get these error boot failure. Reboot and select proper boot device or insert boot media in selected boot device

[How can I dynamically deploy multiple operating systems with System Center 2012 R2 Configuration Manager ?]

boot failure. Reboot and select proper boot device or insert boot media in selected boot device

[Configuration Manager Client Issues]

solveeeeeeeeeeeeeeeeeeeeeed

 

 

i removed MP and restart and re add it again

every thig is working goooood

 

thanks again for your time

[Configuration Manager Client Issues]

i found error

 

[Configuration Manager Client Issues]

thank you Grath for your time

i have only one subnet (192.168.100.0/24)

and the client and SCCM machine on same range

 

I delete old boundary and create a new one using IP range

and make a test, delete client from machine and re install it again with the same issue

[Configuration Manager Client Issues]

I have only one boundary configured as active directory site and the client assigned to the same site

 

[Configuration Manager Client Issues]

Hi every one

SCCM 2012 R2 with CU2

i face a problem in Config Mgr Client as you see in attachments

 

 

no policy in action and notification agent is disabled >???

Any idea >>>

thx

[Error 0X80004005]

SMSTS.log

errors:

 

Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property


Error getting system isolation info. Code 8027000C

Failed to delete directory 'C:\_SMSTaskSequence'

SetObjectOwner() failed. 0x80070005

RemoveFile() failed for C:\_SMSTaskSequence\TSEnv.dat. 0x80070005

RemoveDirectoryW failed (0x80070091) for C:\_SMSTaskSequence

Failed to delete registry value HKLM\Software\Microsoft\SMS\Task Sequence\Package. Error code 0x80070002

ReleaseRequest failed with error code 0x8000400

smsts.log

[Error 0X80004005]

i have error on SCCM 2012 SP1 CU4

task sequence manager could not release active TS request code 80004005

i installed sccm 2012 with sp1 and then install the CU4 and distribute the cumulative update on the DP

 

is there any modification should i need to do after that ???