[SCCM OS Deployment - PXE Boot Aborted]

New day new problem:

My sccm 2012 server works correctly but with a kind of desktop computer is giving problems .... I explain my problem

when I start the deployment of the operating system I get the following error:

ALL other types of computer work only gives me this error

These however are all the checks I did:

Restarted WDS service

SCCM server restarts

no change...

checked SMSPXE.log

Checked if there is another MAC Address (does not exist)

I also changed the network card physically from the house ... but the scenery does not change!

.... everything else works great but this type of computer (hardware) should not be!

Help me!!

[Activating Windows 7 Using Kms In Osd Task]

Nothing will NOT work!

[Activating Windows 7 Using Kms In Osd Task]

try to add a 'Run Commandline' step.

 

Enter the following in the commandline box:

 

cmd /c slmgr /ato

....I did not understand ...

 

 

cmd /c cscript.exe C: \ Windows \ System32 \ slmgr.vbs / skms servername.fqdn

[Activating Windows 7 Using Kms In Osd Task]

Ok I've tried, but it does not work the same

have an idea

[Activating Windows 7 Using Kms In Osd Task]

Hi,

When using KMS you should not enter a Product key at all, the client will activate itself as well automatically when installed, you can activate it using the KMS server using the command described here:http://technet.microsoft.com/en-us/library/ff793406.aspx

The KMS server key on the volume licensing site is to be used when installing the KMS server..

 

Regards,

Jörgen

Hi Jörgen

thanks for the reply ...

so you do not have to enter the serial number but only the command register to kms:

cscript.exe C: \ Windows \ System32 \ slmgr.vbs / skms servername.fqdn

thanks

[Activating Windows 7 Using Kms In Osd Task]

HI guys....

 

I created the task sequence for deploiare windows 7 sp1 ent

and I entered the commands to activate the KMS server on windows of my workplace ...

but all this does not work .... if you look at the log command throws without problems and without giving me errors.

I am attaching pictures of everything ...

I can aiutare__ Thanks

[Uninstall OFFICE 2010 32bit]

Hello,

I explain my problem:

I have 4 computers installed Office 2010 32-bit, now I have to uninstall it and install the 64bit.

To do this, what should I do?

My work environment is as follows:

Server: SCCM 2012 RTM 64bit

Client: Windows 7 64bit

 

Thanks

[Manually Synchronize WSUS]

Hello,

I explain my problem

In my work environment I've added a new site system roles (WSUS).

I have no internet connection and so I have to download updates from a server that is not in my organization because in another place (My wsus is in Italy and the server from which I download is in Germany)

I ask you in the installation I selected the following option:

But the server name and / or IP address where I have to set it up?

YOU have to do more? Database? Log?

Thank you very much as always!

[WSUS 3.0 Install Problem]

Buongiorno!

I have the same error on my server.

I describe my work environment

• WINDOWS SERVER 2008 R2 Enterprise 64bit SP1
  
• SCCM2012 RTM
  
• WSUS 3.0 SP2 installed with the setup.exe because [they are not connected to the Internet
  
• IIS7
  

[PXE not working]

Ok guys! I solved it was just a problem to boot!

I redid the boot and published and now everything works!

Thanks for the support

[PXE not working]

Can you successfully start the image when using boot media? Try if you haven't, if it works that is good and we can go from there. If it errors pull the X:\Windows\temp\smsts\smsts.log file to see any errors that may be occurring.

 

Is your task sequence being deployed to unknown computers or to a collection that you import computers to?

 

hello

I have not yet tried the boot media (this test I will do it today) I'll bring you the news.

The strange thing is that 5 days ago everything worked!

 

 

Are you try deploy in new desktop? Do you have imported new computer in SCCM? Calm Down this error is one f**** but have solution.

 

Yes, I have to deploy Windows 7.

I imported the computer (MAC address) but nothing changes.

Today I continue to seek a solution

[PXE not working]

I'm really went into total confusion for this problem that seems to have no end!

I followed and tried all possible solutions but I do not get out of this loop.

The error is shown in the attached images.

This is my work environment:

SERVER 1: DHCP

SERVER 2: SCCM2012

CLIENT: WINDOWS 7

I disabled the PXE on DP

I have uninstalled and reinstalled WDS

I recreated the boot files

I enabled the reception of the client unknow

I cleaned SCCM from any PC previously associated with and recognized by a query (Mac Address)

I have no idea what can be

HELP ME please!

Thanks!

[using System Center 2012 Configuration Manager - Part 7. Build and Capture Windows 7 X64 SP1]

Hello everyone!

I get an error sull'SCCM 2012 RTM that is driving me crazy!

I followed all the duscussioni possible to find a solution but nothing yet.

The error is as follows:

thi is the log

[PXE-E32 TFTP open timeout]

my error is persistent, and I continued to do research!

The events in the server sccm2012:

DOWNLOAD FTFP: SMSBoot\x86\wdsnbp.com

DOWNLOAD FTFP: SMSBoot\x86\pxeboot.com

DOWNLOAD FTFP: SMSBoot\x86\bootmgr.exe

SMSPxe.log:

Begin validation of Certificate [Thumbprint 4AA7108DF638F7C3ADDCAF8BB6010CEE46143F94] issued to (3751ACF3-23CC-4723-ADF9-143785BF533F)

Complete validation of certificate [Thumbprint 4AA7108DF638F7C3ADDCAF8BB6010CEE46143F94] issued to (3751ACF3-23CC-4723-ADF9-143785BF533F)

PXE: CNotify TImer:Int

PXE: CNotify TImer:CancelTimer

PXE: CNotify TImer:RegisterTimeout

Set media certificate in trasport

Set authentichation in trasport

Set authentichation in trasport

Client lookup reply: <ClientIDReply><Identification Unknow="0" ItemKey="0" ServerName=""ServerRemoteName="><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>

Set authentichation in trasport

Set authentichation in trasport

[SCCM 2012 WSUS Sync Error]

I was wondering if anybody had any potential solutions to an issue that came up yesterday. Prior to yesterday, our WSUS server and SCCM server were synced and operating properly. As of today, we are getting a WSUS sync error reading:

compnent SMS_WSUS_MANAGER on coputer (server) reported: WSUS Synchronization failed. Message: Could not load file or assembly or one of its dependencies. Strong name validation failed (Exception from HRESULT: 0x8013141A)

Source: wsyncact.

The operating system reported error 2148722978:

 

 

Any ideas...

i found this:

 

http://www.petenetlive.com/KB/Article/0000313.htm

[PXE-E32 TFTP open timeout]

Explain how to you solve the first error, this help another people.

 

What's the new error?

 

Ok i'm sorry!! I explain you the solution:

 

 

On SCCM2012 Server:

 

opened on firewall the port 69 UDP

 

On DHCP Server:

 

delete 060 PXEClient

add 067 Bootfile Name "SMSBoot\x64\wdsnbp.com"

 

 

 

After this change the client start and capture the ip address but at moment of starting the boot i have this new error:

 

 

I tryed to deleting the two boot present into SCCM and recreated with adk but the view doesn't change!

[PXE-E32 TFTP open timeout]

thank you newadmsccm,

 

i fix my error but now after boot this is the new error

 

 

and the solution explained on this post not have successfull

http://heineborn.com/tech/sccm-2012-troubleshooting-pxe/

[PXE-E32 TFTP open timeout]

Hello guys!

I need you!

VI decrivo my work environment first of all:

Windows Server 2008 R2 with SCCM 2012 RTM installed

Serevr Windows 2008 R2 Domain Controller and DHCP role

Well ... I have come at the time of deployment Windows 7 in my work environment, after setting everything on the client I get the following error:

"PXE-E32: TFTP Open Timeout"

I've done several searches without finding a fix right, there is a lot of confusion!

I ask you where I could go wrong?

THANK YOU and I look forward to the support

[Client SCCM]

Good morning!

I open this topic to ask you a strange thing is happening with my server SCCM2007.

In the collection I have 600 clients, and for two days I noticed in the column client exits the words NO.

This means that the sccm client is not installed, but after a thorough inspection this is not true because I've seen physically on the workstation that the configuration manager is installed.

you have solutions

Thank you all for the support

[Failed Advertisment]

Hello,

I have some problems with my SCCM 2007 server and I wanted your help!

 

I created an advertisement for the Java RuntimeEnviroment and this is the error

 

 

Description:

The program for advertisment "N0120078 has not yet started because the content fo the package "N010005C" - "Java RuntimeEnvironment 1.6.35 ENG" (version 1) has not been acquired.

Possible cause: The content for this program must be downloaded into the computer's cache, or the content could not be located.

Solution: If the program is being dowloaded, no action is required. The program will start once the downloaded has been successfully completed. etc..etc...

 

 

thanks

[Problem with advertisment]

Check the execmgr.log for more information.

 

Hi

 

I checked the log but does not give me any error for that advertisment!!!

[Problem with advertisment]

HI,

 

i have a problem with my SCCM 2007.

 

 

I created an installation package Flash Player and after I created a advertisments.

The problem is that the machines receive the task but not part of the installation and waits and creates this event:

 

Advertisement "n34304309" was received from site "Z01"

The client passes any supported platform requirements and the SMS will add the advertisement's program to the list That Will Be Displayed to users and / or run via assignment. If an advertisement is received but not displayed on a client, verufy That the current time on the client is between the advertisement start and expiration times, And that the program specified in the advertisment is enabled.

 

 

Thanks for those who help me

 

hello

[Duplicate workstation]

Hi!!!

 

I have one big question for you

 

In my company of about 600 customers have installed and configured a server SCCM2007 sp2.

I proceeded to installing the client ccm, but today I realized that I have duplicate workstation-

The strange thing is that almost all of the servers.

 

 

The boundaries are configured in Active Directory

 

Thanks for the help and sorry for my english

[Configuring Software Update Point within SCCM]

Hi,

I have a problem with my server SCCM2007.

in particular I can not run the software update.

 

I installed WSUS and I have not configured anything, I proceeded to configure the sccm.

When I sync I get the following error:

 

On 11/10/11 14:13:58, component SMS_WSUS_SYNC_MANAGER on computer SERVERNAME reported: SMS WSUS Synchronization failed.

Message: WSUS server not configured.

Source: CWSyncMgr: DoSync.

The operating system reported error 2147500037: Unspecified error

 

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp

 

I do not download updates from Microsoft Update, but from another server of our company.

 

Thank you for your help.

[New server sccm]

good morning

 

I have a question for you. SCCM2007 I have a server in my company but these days I have many problems.

I ask if I format the server and get one again, I will have problems with the distribution of agents?

 

Do you have a procedure to first uninstall all the agents from the clients?

 

thanks