[Failed to run Task Sequence 0x80004005]

I also think I found the file you were talking about.

Attaching.

 

SMSPXE.log

[Failed to run Task Sequence 0x80004005]

Thank you so much for your help.  

I found some Event ID's that I think are going to tell us more.  

The description for Event ID 9009 from source Microsoft-Windows-IIS-APPHOSTSVC cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

and

On 4/20/2021 2:52:13 PM, component SMS_MP_CONTROL_MANAGER on computer \\server\.COM reported:  MP Control Manager detected User Service is not responding to HTTP requests.  The http error is 500.

Possible cause: IIS service is not responding. 
Solution: Manually restart the W3SVC service.

and

Event ID 1284  An error occurred while trying to create the directory for the  architecture. 
 
 Error Information: 0x3 
 

 

[Failed to run Task Sequence 0x80004005]

I was able to get the attached log file from a laptop I am trying to image.  If this is a network issue do you know how to fix that?

ccmsetup.log

[Failed to run Task Sequence 0x80004005]

So I use a bootable usb drive that has the .iso on it.  I do not do PXE boot.  it will get to the Welcome to the Task Sequence Wizard but then when I hit next it gives the error 0x80004005

[Failed to run Task Sequence 0x80004005]

This log file is from the 16th.  I was able to get this file off that particular pc that I tried reimaging.

[Failed to run Task Sequence 0x80004005]

This issue happened after rebooting server 2016 that has SCCM 2012 installed on it.  I have tried to create new .iso files but that did not work

tried to capture a new image and then go through the process of adding new operating system image, and then deploying, and then the task sequence.

But I still get the same error. 

I am attaching a  smsts.log file.

would appreciate any assistance.

Thanks Cindy

smsts.log

[Failed to run Task Sequence]

Well I am back to imaging.   Can't thank you enough.

[Failed to run Task Sequence]

SCCM will create an UNKNOWN under devices every time I try.  The media I use is created with Rufus and creates a partition.  Not sure how to create new media because I use the ISO created when running the LiteTouch.vbs.  

[Failed to run Task Sequence]

After updating from 5.009040.1000 to 5.009040.1019 I am having problems imaging some endpoints.

errors I get are Failed to run Task Sequence:  0x8007000F, 0x80004005, and 0x80070490.

I also get a screen now that I never got before.  see Attached Ready to Start.  I have looked through your knowledge base but am not getting this figured out.  I am also attaching a screen shot of About Microsoft EndPoint Config Manager.  Any help would be appreciated.