Jump to content


Jeff K

Internet Management Point setup and errors

Recommended Posts

Hi

 

i am trying to setup a Internet MP for just users that never see an office. i have follwed this post to set it up but running into issues that i cant figure out. i am hoping that someone can assist me in getting this fixed.

 

http://www.systemcenterdudes.com/internet-based-client-management/

 

 

I went and did all the client certs before installing. made sure IIS had the cert installed before SCCM was installed. made sure site and site systems were set for internet and intranet access. imported DP cert in the dp section. installed SCCM and got no errors.

 

Here is from the mpcontrol.log

 

Machine name is 'NWICCM01.nwtraders.msft'. 1/7/2015 2:12:49 PM
Begin validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Completed validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Skipping this certificate which is not valid for ConfigMgr usage. 1/7/2015 2:12:49 PM
There are no certificate(s) that meet the criteria. 1/7/2015 2:12:49 PM
Performing machine FQDN to SAN2 search. 1/7/2015 2:12:49 PM
Begin validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Completed validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Using custom selection criteria based on the machine NetBIOS name. 1/7/2015 2:12:49 PM
Machine name is 'NWICCM01'. 1/7/2015 2:12:49 PM
Begin validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Completed validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft' 1/7/2015 2:12:49 PM
Skipping this certificate which is not valid for ConfigMgr usage. 1/7/2015 2:12:49 PM
Begin validation of Certificate [Thumbprint 341f426c7a86ea084ff324ede6450fa173498f4c] issued to 'sccmlab.domain.com' 1/7/2015 2:12:49 PM
Certificate doesn't have "SSL Client Authentication" capabilities. 1/7/2015 2:12:49 PM
Completed validation of Certificate [Thumbprint 341f426c7a86ea084ff324ede6450fa173498f4c] issued to 'sccmlab.domain.com' 1/7/2015 2:12:49 PM
Skipping this certificate which is not valid for ConfigMgr usage. 1/7/2015 2:12:49 PM
There are no certificate(s) that meet the criteria. 1/7/2015 2:12:49 PM
Failed to retrieve client certificate. Error -2147467259 1/7/2015 2:12:49 PM
Call to HttpSendRequestSync failed for port 443 with -2147467259 error code. 1/7/2015 2:12:49 PM
Sent summary record of SMS Management Point on ["Display=\\NWICCM01.NWTRADERS.MSFT\"]MSWNET:["SMS_SITE=IMP"]\\NWICCM01.NWTRADERS.MSFT\ to \\NWICCM01.nwtraders.msft\SMS_IMP\inboxes\sitestat.box\haj0o219.SUM, Availability 1, 52425724 KB total disk space , 42883468 KB free disk space, installation state 0. 1/7/2015 2:12:49 PM
Http test request failed, error code is -2147467259. 1/7/2015 2:12:49 PM
Successfully performed Management Point availability check against local computer. 1/7/2015 2:12:49 PM
i can telnet to the open 443 over the web and no issues there long with port 80.
in the line that says Begin validation of Certificate [Thumbprint 341f426c7a86ea084ff324ede6450fa173498f4c] issued to 'sccmlab.domain.com' i have followed that document and am sure it does have ssl capabilities. am i missing a step in IIS????

 

Share this post


Link to post
Share on other sites


Well the MP finally settled down and was successful. b ut now the client I am trying from doesn't want to install. the first line is the install with switches from a batch file.

 

 

 

 

cmd /c c:\windows\ccmsetup\ccmsetup.exe /mp:SCCMLAB.domain.com /usePKICert /NoCRLCheck FSP=SCCMLAB.domain.com CCMALWAYSINF=1 CCMHOSTNAME=sccmlab.domain.com SMSSITECODE=IMP RESETKEYINFORMATION=TRUE CCMLOGMAXHISTORY=0 CCMLOGMAXSIZE=300000 CMALLOWSILENTREBOOT=0

Unable to retrieve AD forest + domain membership
Domain joined client is in Internet
DHCP entry points already initialized.
Begin checking Alternate Network Configuration
Finished checking Alternate Network Configuration
Adapter {3E0F2CE1-C40D-467A-AAC3-1F7DE3F71DF8} is DHCP enabled. Checking quarantine status.
Adapter {6571246B-7970-4A9A-AD2E-06EC53BA77BF} is DHCP enabled. Checking quarantine status.
Adapter {86B668FD-7A29-4002-A477-5C25995E6D8C} is DHCP enabled. Checking quarantine status.
Adapter {C4D7AB6F-B931-4B14-9F3D-5E86EB4FA106} is DHCP enabled. Checking quarantine status.
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="IMP"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="1">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name=""/>
<Domain Name=""/>
<IPAddresses>
<IPAddress SubnetAddress="192.168.0.0" Address="192.168.0.2"/>
<IPAddress SubnetAddress="2001:0000:9D38:90D7" Address="2001:0000:9D38:90D7:10D5:273C:3F57:FFFD"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
'
Sending message header '<Msg SchemaVersion="1.1"><ID>{FB003907-9553-4236-9076-B0B740BB90BF}</ID><SourceHost>L00729</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:L00729:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCMLAB.domain.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-01-13T20:56:01Z</SentTime><Body Type="ByteRange" Offset="0" Length="1276"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
CCM_POST 'HTTP://SCCMLAB.domain.com/ccm_system/request'
Failed to receive ccm message response. Status code = 403
GetDPLocations failed with error 0x80004005
Failed to get DP locations as the expected version from MP 'SCCMLAB.domain.com'. Error 0x80004005
Failed to find DP locations from MP 'SCCMLAB.domain.com' with error 0x80004005, status code 403. Check next MP.
Only one MP SCCMLAB.domain.com is specified. Use it.
Have already tried all MPs. Couldn't find DP locations.
GET 'HTTP://SCCMLAB.domain.com/CCM_Client/ccmsetup.cab'
Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)
DownloadFileByWinHTTP failed with error 0x80004005
Sending Fallback Status Point message to 'SCCMLAB.domain.com', STATEID='308'.
Failed to get client version for sending messages to FSP. Error 0x8004100e
Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Url HTTP://SCCMLAB.domain.com/CCM_Client/ccmsetup.cab'
Request failed: 404 Not Found

'Configuration Manager Client Retry Task' is scheduled to run at 01/13/2015 08:56:04 PM (local) 01/14/2015 01:56:04 AM (UTC) time with arguments ' "/mp:SCCMLAB.domain.com" "/usePKICert" "/NoCRLCheck" "FSP=SCCMLAB.domain.com" "CCMALWAYSINF=1" "CCMHOSTNAME=sccmlab.domain.com" "SMSSITECODE=IMP" "RESETKEYINFORMATION=TRUE" "CCMLOGMAXHISTORY=0" "CCMLOGMAXSIZE=300000" "CMALLOWSILENTREBOOT=0" /RetryWinTask:1'.
CcmSetup failed with error code 0x80004005

Share this post


Link to post
Share on other sites

i can resolve the name, and can telnet to port 443 without issues. when I go to the MP website i get access denied. not sure if its some permissions that require setting???

 

post-5927-0-35808800-1421264514_thumb.jpg

Share this post


Link to post
Share on other sites

now I copied all of the items in the client folder to the machine and it is starting to install, whether or not the client will connect is a different story but I stopped IIS and WWW service on the MP cleared the WWW logs before I started then rebooted the MP and checked and the MP is good. so I started on the client and it didn't work but again if I copy the client files to the machine then it starts the install. I don't want to do this on 40 machines or 400. here is the log from IIS, nothing connects.

 

#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2015-01-16 13:14:51
#Fields: date s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status sc-bytes time-taken
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 2454
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 38
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 37
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 52
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 29
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 41
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 35
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 107
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 36
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 103
2015-01-16 ::1 GET /SMS_MP/.sms_aut MPLIST 443 - ::1 SMS_MP_CONTROL_MANAGER - 200 0 0 602 93

Share this post


Link to post
Share on other sites

I looked in the logs and some stuff isn't making sense. I am trying to figure out why it can send back FSP messages.

 

Sending Fallback Status Point message, STATEID='500'.
Failed to send status 500 to the FSP (87D0027E)
Processing pending site assignment.
Assigning to site 'IMP'
LSIsSiteCompatible : Verifying Site Compatibility for <IMP>
Using INF MP sccmlab.domain.com as lookup MP.
Attempting to retrieve site information from lookup MP(s) via HTTPS
Refreshing the Management Point List for site IMP
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141245.516000+000";
HostName = "sccmlab.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Refreshing trusted key information
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141245.828000+000";
HostName = "sccmlab.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

LSRefreshTrustedKeyInfo: Client is always on Internet. Skipping refresh from AD.
Persisting the management point authentication information in WMI
Persisted Management Point Authentication Information locally
Refreshing Certifcate Information over HTTP
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141246.249000+000";
HostName = "SCCMLAB.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Refreshed Certificate Information over HTTP
LSGetSiteInformationFromManagementPoint('IMP'): Assignment Site Code [iMP], Version [5.00.7958.1000], Capabilities [<Capabilities SchemaVersion="1.0"/>], Client Operational Settings [<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>480</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=nwtraders-NWDC02-CA-1; DC=nwtraders; DC=msft</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration></ClientOperationalSettings>].
LSIsSiteVersionCompatible : Site Version '5.00.7958.1000' is compatible.
LSIsSiteCompatible : Site <IMP> Version '5.00.7958.1000' is compatible.
LSVerifySiteAssignment : Client can be assigned to site <IMP>.
Client is on the internet. Verifying the existence of an internet facing MP prior to reassigning to the new site
Current AD site of machine is Default-First-Site-Name
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141246.966000+000";
HostName = "SCCMLAB.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Successfully reached INF MP at 'SCCMLAB.domain.com'. Client is able to reassign to new site
Client is not assigned to a site. Cannot get portal info.
LSRefreshSecuritySettings: Client is always on Internet - skipping security settings refresh.
Using INF MP sccmlab.domain.com as lookup MP.
Attempting to retrieve site information from lookup MP(s) via HTTPS
Refreshing the Management Point List for site IMP
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141247.653000+000";
HostName = "sccmlab.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Refreshing trusted key information
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141248.012000+000";
HostName = "sccmlab.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Persisting the management point authentication information in WMI
Persisted Management Point Authentication Information locally
Refreshing Certifcate Information over HTTP
Raising event:

instance of CCM_CcmHttp_Status
{
DateTime = "20150116141248.339000+000";
HostName = "SCCMLAB.domain.com";
HRESULT = "0x00000000";
ProcessID = 3900;
StatusCode = 0;
ThreadID = 4984;
};

Refreshed Certificate Information over HTTP
LSGetSiteInformationFromManagementPoint('IMP'): Assignment Site Code [iMP], Version [5.00.7958.1000], Capabilities [<Capabilities SchemaVersion="1.0"/>], Client Operational Settings [<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>480</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=nwtraders-NWDC02-CA-1; DC=nwtraders; DC=msft</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration></ClientOperationalSettings>].
Refreshed security settings over MP

 

 

here is the FSPstatemessage.log

 

Failed to send location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=448, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Failed to send location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
[CCMHTTP] ERROR: URL=HTTP://SCCMLAB.domain.com/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.

 

here is out of the clientidstartup

 

[----- STARTUP -----]
Machine: L00729
OS Version: 6.1 Service Pack 1
SCCM Client Version: 5.00.7958.1000
'RDV' Identity store does not support backup.
CCM Identity is in sync with Identity stores
Client is set to use HTTPS when available. The current state is 480.
Begin searching client certificates based on Certificate Issuers
Certificate Issuer 1 [CN=nwtraders-NWDC02-CA-1; DC=nwtraders; DC=msft]
Based on Certificate Issuer 'nwtraders-NWDC02-CA-1' found Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
Begin validation of Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
Completed validation of Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
Completed searching client certificates based on Certificate Issuers
Begin to select client certificate
Begin validation of Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
Completed validation of Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
>>> Client selected the PKI Certificate [Thumbprint 4D8D7531458995076E3C7D2F35D846FDBD175C3F] issued to 'L00729.company.local'
Raising event:

instance of CCM_ServiceHost_CertRetrieval_Status
{
DateTime = "20150116141301.802000+000";
HRESULT = "0x00000000";
ProcessID = 1420;
ThreadID = 3040;
};

Failed to submit event to the Status Agent. Attempting to create pending event.
Raising pending event:

instance of CCM_ServiceHost_CertRetrieval_Status
{
DateTime = "20150116141301.802000+000";
HRESULT = "0x00000000";
ProcessID = 1420;
ThreadID = 3040;
};

Client PKI cert is available.
Initializing registration renewal for potential PKI issued certificate changes.
Succesfully intialized registration renewal.
[RegTask] - Executing registration task synchronously.
Read SMBIOS (encoded): 5200390045003200580039004B00
Evaluated SMBIOS (encoded): 5200390045003200580039004B00
No SMBIOS Changed
SMBIOS unchanged
SID unchanged
HWID unchanged
Windows To Go requires a minimum operating system of Windows 8
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Windows To Go requires a minimum operating system of Windows 8
Computed HardwareID=2:22BA17F582848D457E3D2F5435AE75E8C8C9AD0E
Win32_SystemEnclosure.SerialNumber=R9E2X9K
Win32_SystemEnclosure.SMBIOSAssetTag=No Asset Information
Win32_BaseBoard.SerialNumber=1ZK3R16213L
Win32_BIOS.SerialNumber=R9E2X9K
Win32_NetworkAdapterConfiguration.MACAddress=<Not used on laptop>
[RegTask] - Client is not registered. Sending registration request for GUID:660a9ab9-9a2d-46b7-8142-68e5cdd5d6ef ...
RegTask: Failed to send registration request message. Error: 0x87d00231
RegTask: Failed to send registration request. Error: 0x87d00231
[RegTask] - Sleeping for 60 seconds ...
[RegTask] - Client is not registered. Sending registration request for GUID:660a9ab9-9a2d-46b7-8142-68e5cdd5d6ef ...

 

Share this post


Link to post
Share on other sites

Thanks, Peter, I am just trying to get all the help I can. for some reason this Internet MP is not working or there is something else wrong some where.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...