No Image Found 0 Posted August 18, 2017 Report post Posted August 18, 2017 Hello, My organization is running on Windows 7. Windows 10 is not an option at this time. I can image computers with a traditional HDD. Anytime I try to apply our Windows 7 image to a M2 drive it absolutely fails, will not even attempt to image. Anytime I attempt to image a SSD the imaging process goes through until the computer reboots to finish the installation process. It goes into a reboot loop. The drives are fine because I am able to image Windows 10 to HDD, SSD, and M2. I found turning RAID off and turning AHCI on in the BIOS and allowing for legacy boot worked in the past to allow me to image SSDs. However, I have a Dell Precision M 4700 that I installed a SSD in and Windows 7 will not image even with the BIOS settings I've used in the past. I just installed Windows 7 to this SSD with a DVD and it worked fine. Any idea as to what I'm missing? Quote Share this post Link to post Share on other sites
gavin1973 0 Posted August 18, 2017 Report post Posted August 18, 2017 Hi, It is a bit of strange one but I have noticed the following link which may help to trouble shoot your problem. http://www.dell.com/support/article/uk/en/ukbsdt1/sln300689/requirements-to-install-windows-7-on-m2-drives-in-non-volatile-memory-express--nvme--storage-environments?lang=en Quote Share this post Link to post Share on other sites
No Image Found 0 Posted August 21, 2017 Report post Posted August 21, 2017 Thanks, this seems to be what I have been experiencing. Quote Share this post Link to post Share on other sites