Skip to content

Error code 0x80070490

Featured Replies

Hi all

I am new to this forum.

 

I have this problem with a Lenovo Thinkpad T410s. When trying to reinstall it through SCCM 2007, it gives the task sequence error 0x80070490. I searched Google and found that it could be something with a partition. However I have wiped all partitions on the harddrive and I still get it. I tried looking in the logs, but doesn't seem ti find anything.

Other computers work just fine to reinstall (through same cable n' everything)

 

Last thing I did was to delete the computer from the SCCM and imported in again, but I still get the exact same error. It comes directly in the beginning after putting in my password and choosing task sequence.

Also tried full format of drive from a linux live CD, but no :(

 

My skills in SCCM aren't that deep, but I have access to everything in it.

 

I hope any of you can help me

 

cheers!

/MadJax

  • Author

Found this on the advertisement:

 

The task sequence execution engine failed executing the action (Format and Partition Disk) in the group (New Computer Only) with the error code 2147943568

Action output: ==============================[ OSDDiskPart.exe ]==============================

Command line: "osddiskpart.exe"

Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'

FALSE, HRESULT=80070490 (e:\nts_sms_fre\sms\framework\tscore\diskutils.cpp,1386)

CDisk::GetDiskSize(oDisk.getIndex(), cbDiskSize), HRESULT=80070490 (e:\nts_sms_fre\sms\client\osdeployment\osddiskpart\main.cpp,691)

LoadDiskConfiguration(oDisk), HRESULT=80070490 (e:\nts_sms_fre\sms\client\osdeployment\osddiskpart\main.cpp,1412)

Invalid disk number specified: 0

Invalid configuration specified. Please ensure that the task sequence is properly configured.

OSDDiskPart.exe failed: 0x80070490. The operating system reported error 2147943568: Element not found.

  • Author

Seems to have solved this myself

 

I enabled command line on boot image so I could access diskpart.exe. From there I saw that no disk was found.

I put SATA in BIOS in compability mode and tried again and now it works :)

  • Author

I take that back. The installation stops and I get a BSOD screen that loops with reboots. Back to square one

  • Author

I tried this as next step:

When first reboot came (after drivers were applied n' all) I went into BIOS and switched back to AHCI on SATA settings. It looks like it goes further now :)

  • Author

Main reason for this was a bad harddrive. I switched it and it worked all the way with AHCI

  • 3 weeks later...

The problem i think is that you need to add the SATA drivers to your WINPE img here for that model, That is why you got it to work when you are using "compatability mode" in bios instead of AHCI.

  • 1 year later...

Thanks for documenting all your steps in working through this MadJax. You helped me with the SCSI mode setting!

  • 2 months later...

I often have that kind off problem with computers that use network card that is not integrated in boot image (after booting to SCCM PXE and selecting task sequence....computer automaticaly restarts). All you have to do is insert LAN drivers for network card of this computer in boot image.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.