Jump to content


  • 0
jcvnstdn

Exchange 2013 Resources?

Question

I setup and configured EXCH2013, but for the life of me I can't add rooms, or resources.

 

the + add sign isn't shown on my EAC.

Please help

Share this post


Link to post
Share on other sites

Recommended Posts

  • 0

Hi,

 

Even if I sent you a respond on your message, I'll post it here as well if anyone might run into the same issue.

 

Can you create normal mailboxes?

If that is the case you can change mailbox type after you've been creating the mailboxes by using

set-mailbox -id roommailbox01 -type room

 

I hope this will help you

 

Ps. Are you using CU1?

  • Like 1

Share this post


Link to post
Share on other sites

  • 0

Great help! works 100%

 

Another question I have regarding Exchange 2013 is the following.

Only when my users send meeting requests i get the following error.

 

 

Delivery has failed to these recipients or groups:

 

user@domain.com
The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.

 

 

Diagnostic information for administrators:

 

Generating server: server.senderdomain.local

 

user@domain.com

#550 4.4.7 QUEUE.Expired; message expired ##

 

 

Original message headers:

 

Received: from server.senderdomain.local (10.1.0.232) by
server.senderdomain.local

(10.1.0.232) with Microsoft SMTP

Server (TLS) id 15.0.516.32; Thu, 9 May 2013 09:10:23 +0200
Received: from
server.senderdomain.local
([fe80::b564:f079:a8f2:11fb]) by server.senderdomain.local
([fe80::b564:f079:a8f2:11fb%12]) with mapi id 15.00.0516.029; Thu, 9 May 2013
09:10:22 +0200
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Sender <
sender@senderdomain.com>
To:
user@domain.com
Subject: Client Com
Thread-Topic: Client
Thread-Index: Ac5Mg+uFKY+vahzlQMKbjJnShFOBugAAFgww
Disposition-Notification-To: Sender
<
sender@senderdomain.com>
Date: Thu, 9 May 2013 09:10:21 +0200
Message-ID: <064c70fe233a45f29642462c8284a405@
server.senderdomain.local>
Accept-Language: en-ZA, en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <064c70fe233a45f29642462c8284a405@server.senderdomain.local>
MIME-Version: 1.0
X-Originating-IP: [10.1.0.57]
Return-Path: sender@senderdomain.com
X-EsetResult: clean, is OK
X-EsetId: 1961053D22C734334C2C5A

Share this post


Link to post
Share on other sites

  • 0

I would start with enabling the verbose logging for the connector and check the log files for errors

If you want, post the smtp session in the thread or even better, create a new thread and set this to solved since its a new incident

 

Cheers

Share this post


Link to post
Share on other sites

  • 0

Ok here is what i did, I enabled logging in the send connector,

 

 

Logging - Off
On

as well as

 

 

Message tracking log
Enable message tracking log
Message tracking log path:

Connectivity log
Enable connectivity log
Connectivity log path:

Protocol log
Send protocol log path:
Receive protocol log path:

Enabled the above settings.

 

where do i find the log you speak of?

 

THNX!

Share this post


Link to post
Share on other sites

  • 0

what type of error am i looking for? here is a list of all i get.

 

 

220 Starting TLS,

451 unable to verify user,

354 Start mail data, end with CRLF.CRLF",

221 Service closing transmission channel,

250 OK Sender ok,

451 Greylisted, please try again in 123 seconds",

221 Service closing transmission channel,

Share this post


Link to post
Share on other sites

  • 0

2013-03-22T11:57:09.912Z,,08CFF4F8BFFFE046,0,10.1.0.232:25,168.142.192.38:21933,+,,

2013-03-22T11:57:09.912Z,,08CFF4F8BFFFE046,1,10.1.0.232:25,168.142.192.38:21933,>,421 4.3.2 Service not available,

2013-03-22T11:57:09.912Z,,08CFF4F8BFFFE046,2,10.1.0.232:25,168.142.192.38:21933,-,,Local

Share this post


Link to post
Share on other sites

  • 0

Are you using Forefront Protection or any other 3rd part product for preventing spam?

Also verify the transport services are started, both the frontend transport and the regular transport service

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.