Jump to content


MikeSavasta

Established Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by MikeSavasta

  1. Hi BJohn, I'm experiencing the same issue as you with Checkpoint. I'm using Systems Center 2012 SP1 with MDT 2012 update 1 integrated to do a ZTI Refresh deployment. I"m doing XP to Windows 7. I was able to get the Checkpoint filter drivers inject into my boot media so everything in the ZTI runs fine up until it reboots after doing the "Setup Windows and Config Mgr . It goes to start booting but then BSOD's with Error 0x0000ED. I believe the problem is because the drive is not getting formatted it's still holding it's encryption so when the new Windows 7 image starts to boot up it fails because the drive is encrypted and it can't read the disk. Does anyone have a way to format the hard drive during a refresh scenario? I have been searching the internet and blogs for a few days and have not found any resolution yet. I do not want to break this down into two task sequence. I simply need my Default Client Task Sequence to Format and Partition the disk during a Refresh scenario that is launched from within Windows by the end user. Any help would be appreciated. Thanks
  2. Go it figured out. Had to change my Unattend.xml Variables around and all the settings are applying now. Thanks
  3. Here are the log files and the Unattend.xml that I "Think" is being used. Why I said I think it's the one being used is because it's in the Toolkit Settings package, but I do not know where or if this file get's copied down during the Deployment at some point. smsts.log smsts-20120818-062942.log unattend.xml
  4. Hi, Currently I have MDT 2012 Integrated with Systems Center 2012 and am trying to configure the UDIWizard Language screen to work correctly. I followed your post here and went through the troubleshooting logs just to get to the point I'm at. I'm having two issues to be specific. The first one is the screen shot below. The Language pack installs offline, but during the imaging process it throws this selection wizard box which halts the imaging process. I figured this should have been selected automatically. Not sure what I could have missed on that one. The second issue I am seeing is that After I choose the Language in the screen shot below the image will continue and finish with success, but none of my Regional Settings (Country, Currency, Keyboard) are applied. The language pack will be installed and the Time zone is correct, but none of the other regional settings are applying the keyboard. I didn't see this screen on any of your screen shots, but it's most likely because I don't have something configured correctly. Any help is appreciated.
  5. I'm running into some issues and could use a little help if possible. Currently I have Systems Center 2012 and MDT 2012 Integrated. I'm having issues getting the language and regional settings to apply. I've followed this post exactly and a few others on troubleshooting, but can't seem to figure out why it doesn't work. When I change all the drop downs on the regional settings menu to a language that I have setup with a language pack in the Task sequence. The only thing that changes is the Time Zone. The Language pack I choose I can see it trying to run the install during imaging, but after image completion nothing is applied except the Time and the Language pack didn't get installed. Any help would be appreciated. Thanks Also how can I get that Deployment Complete pop up window to come up in my Task Sequence? ZTIPatches.LOG Microsoft Deployment Toolkit version: 6.0.2223.0 ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) ZTIPatches Entered PREINSTALL state. Deployment Method = SCCM ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Operating system being deployed requires x86 updates. ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Pre-Install setup installation state. ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Load XML.... ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Packages.xml not found. Creating Packages.xml ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Creating new Package: C:\_SMSTaskSequence\packages.xml ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) About to run command: expand "C:\_SMSTaskSequence\Packages\DEV000DF\fr-fr\lp.cab" -F:update.mum "C:\_SMSTaskSequence\ZTIPatches.tmp" ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Command has been started (process ID 1644) ZTIPatches 8/15/2012 1:11:27 PM 0 (0x0000) Return code from command = 0 ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Create Package Item : Microsoft-Windows-Client-Refresh-LanguagePack-Package ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Unable to find the Packages.xml file, assuming there are no packages to inject. ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Adding non-language pack entries to unattend.xml ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Open Control File: Packages ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Adding language pack entries to unattend.xml ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Nothing to save, exit. ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Language pack entries added to unattend.xml successfully ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) About to run command: dism.exe /Image:C:\ /Apply-Unattend:"C:\WINDOWS\panther\unattend\unattend.xml" /ScratchDir:C:\_SMSTaskSequence\Scratch /LogPath:X:\windows\TEMP\SMSTSLog\ZTIPatches_DISM.log ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Command has been started (process ID 1416) ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Console > Deployment Image Servicing and Management tool ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Console > Version: 6.1.7600.16385 ZTIPatches 8/15/2012 1:11:28 PM 0 (0x0000) Console > Image Version: 6.1.7601.17514 ZTIPatches 8/15/2012 1:11:30 PM 0 (0x0000) Console > The operation completed successfully. ZTIPatches 8/15/2012 1:11:30 PM 0 (0x0000) Return code from command = 0 ZTIPatches 8/15/2012 1:11:30 PM 0 (0x0000) Remove Folder: C:\_SMSTaskSequence\Scratch ZTIPatches 8/15/2012 1:11:30 PM 0 (0x0000) ZTIPatches processing completed successfully. ZTIPatches 8/15/2012 1:11:30 PM 0 (0x0000)
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.