offrock

Hi everybody!! I have a big problem, one of my VM can't start, I restored the VM but I think the problem is the physical server which is saturated with memory (30GB used on 32gb) but i can't restart because the others vm are installed on the same server. I put here my capture screen. If you know a way to find out the problem without restart you'd save my life Thank for helping guys !!!

Yes, i did the deployment via windows, before the task sequence wasn t present in software center! I don t know why, i did nothing special but after 30 minutes, the task sequence appeared and now it s ok, sometimes i ve to be patient but it s weird sometimes sccm lol Thanks for your time Anyweb Regards

Hi everybody, Hope you can help me, I m working with server 2012 r2 et sccm 2012 r2 sp1, I want to deploy a tak sequence to migrate windows 7 sp1 ultimate to windows 8.1 but nothing happens, nothing in logs, SMSTS not present, absolutely nothing, for sure i made a mistake but where? I can distribute software without problems however. Thanks for helping Julian

Perfect!! thanks a lot

Hi!! Just a little question, what's the app-v detection method used by sccm when we deploy an appv package? (register?Folder?) we don't have the choice. Thanks a lot bye

Hi everybody, Here my problem: I can deploy virtual application on WS 2012 R2 without streaming the applications. But when i change the package to stream i have this error: "the application failed to launch, This may be due to a network failure" Apparently, the path is not good but if it's the case where can i change the path, i don't remember i have to change the path but just change in package properties "Stream content from DP" FYI: I have sccm 2012 sp1 cu3 The app-v client is the 5.0 rds sp2 Thanks a lot for your help regards

Hi everybody, I saw a lot of subjects about this error but i didn't find the answer. I did a manual capture with windows 7. I've no drivers installed and no configmgr client too. I put wim image on the distribution point witch is not the management point. I put network drivers in the boot image and put in the DP too. When i saw this error, i installed the network driver to see the difference but nothing change, still the same. I boot on the usb media (try stand alone and bootable media) I have no logs because it's a new pc so i'm blind and i need your help! thank you

Hi !! I mean app-v streaming, i found a few documentations finally but the installation appv_client_setup.exe SHAREDCONTENTSTOREMODE=1 /q doesn't work so i install manually and i change the registry after. When i push the app-v package i have a local cache all the same. Thank you for your helping

Hi everybody, i'd like to test the Streaming delivery method with sccm 2012 sp1 and i'm looking for documentations about it but i did'nt find the way to achieve. Do you have any suggestions about this subject? Thanks for your helping !!! Julian

Hello, Here my problem! I remove a distribution point on content location in an application, i try to redistribute the content on this distribution point and nothing happens, nothing in monitoring. Has Somebody had this problem before? I'm on sccm 2012 sp1 Thanks you for your help regards

Hi everybody, I need to create an ip range query to a collection, i saw a lot of explanations: I create this query for the ip range 10.201.0.50 10.201.0.254 select * from SMS_R_System where IPAddresses like "10.201.0.[5-9][0-9]" or IPAddresses like "10.201.0.1[0-9][0-9]" or IPAddresses like "10.201.0.2[0-5][0-4]" But nothing machines display In the general tab it's empty, is it normal? thanks guys !!

i hope you can help me, here my problem, i'm working on sccm 2012 sp1 i installed scep to do some tests, everythings are fine but i do the definition update on clients with windows update because when i create an automatic depoyment rule, it doesn' find any definition update do you have an idea? it's enabled in software update point, my rights on my folder is good i don't understand Thanks to you

ho sorry, no this link is not a mistake sorry again

hi ! here my problem, i'm working on sccm 2012 sp1 i installed scep to do some tests, everythings are fine but i do the definition update on clients with windows update because when i create an automatic depoyment rule, it doesn' find any definition update, i find this link http://www.niallbrady.com/2013/02/22/how-can-i-deploy-system-center-2012-endpoint-protection-definition-updates-from-a-unc-file-shares/ but for me it's not a solution (it works only the first time but it's not automatic update) Someone has an idea? Thanks guys!!

Hi ! Yes and it works ! One question more, what's the price for scep if we decide to use it? i read that the client licence is 22$ but the server? We have already a licence key, is it integrate in the price? thanks

Hi !! We have this problem with Kaspersky security, it doesn't compatible with direct access, we cant' administrate the console (we called support). After it's just to inform myself about possibility to use DA with a AV.

Hi everybody, A lot of Anti-virus are not compatible with direct access (cause ipv6), is endpoint protection compatible? Direct access with sccm 2012 sp1 works fine !! thanks for your answer !!

Hi !! it's my idea too so i think you answered to my questions, i'll come back to you if i've an others questions !!! bye and thank you

Hi GarthMJ !! I agree with you, i'm sorry but it's a request of my boss and yes the tech doesn't need to know about dp information. The tech only deploy the package. I suppose this information is important for the delivery of a new package (what dp to choose compared with a computer collection). I hope you understand my english !!

hi !! if there is a package to send to a computer, i'd like that the computer technician find quickly at what distribution point he has to send it (there are 80 DP and a lot of subnet). I know it's possible to find but i'd like to do it faster (thanks to a report in my case).

So is it really impossible? because it's boring when you have 80 DP and 14 000 clients to search the good one !!! it's not cool

Hi! In fact i'd like to create a report via report builder to know the licence key information installed on client machine! but it doesn't matter now. My real goal is to create a report to know how build a report with when i type a computer name, the result give me his distribution point. Do you have an idea? Thanks

Hi everybody, i'd like to know if it's possible to find the windows product key information in sccm 2012 sp1? Thanks for your help

hi everybody! do you know if it's possible to see product keys microsoft (workstations and servers) on sccm 2012 sp1, do i create a new report? thanks for your help !!

It was an error, i wasn't admin on server sorry !!