Hyper V
going Virtual with Hyper V
50 topics in this forum
-
Introduction Update: This script was updated 2017/11/10 with several new abilities to customize most of what you can define in the Virtual Machine settings. This is an extremely quick post to help you create Hyper-V virtual machines using PowerShell. The script assumes you've already installed the Hyper-V feature in Windows. You can define a bunch of variables *highlighted in red below* such as type of Checkpoint, or Memory or CPU settings, to define how your Virtual Machines are created, The script prompts you for three inputs: Virtual Machine name Virtual Switch Name Generation type (Gen1=legacy, Gen 2=UEFI) Here's a…
-
- 2 replies
- 22.8k views
- 1 follower
-
-
Ok imagine this scenario, you run out of hdd space or get a faster hdd that you are storing your HyperV vm's on, and you decide to copy the vms from hd1 to hd2. When you attach the new hd to your computer and try to start your vm's you get an error like this: Unamed VM could not Initialize clicking on See Details reveals the following To fix it we need to restore the ICACLS that were originally set (but not copied) on the VM's. To do this we first need the VM's GUID. To get it, expand the virtual machine dir where you store your vm's, and locate the VM in question, then expand that dir until you see the Virtual Machines directory, in there yo…
-
- 0 replies
- 19.8k views
-
-
Hi Intelligent guru's, I have a question with my current scenario. I recently had to reload my windows OS that I was hosting my Hyper-V VM's on. I stored my Hard Disk Image File and AVHDX File, and also my Virtual Machines snapshots in a separate partition. Is it possible to create the new VM's with the existing snapshots? I am able to attach the HDI files, but that only takes me to the base load. When I try to attach AVHDX file, it errors. I'm just not too sure where to begin. Thanks,
-
- 7 replies
- 9.9k views
-
-
I imported some VHD's from Microsoft Virtual PC to Hyper V, and I noticed that one of my VM's had a problem, I couldn't add a second network card to it (I could add it in settings, but it would never appear as a new device on the VM or in the VM's device manager), so I checked out the device manager, there was a device with a yellow exclamation mark on it called VMBus. Double clicking on that showed me the following error After some googling I found this post and the advice in there was spot on, I had already installed my Intergration Services Setup disk and rebooted, but my problem remained, the VMBus was now called Virtual Machine Bus but still no network, so I…
-
- 2 replies
- 59.8k views
-
-
Those of you that were interested in Microsoft Ignite in Florida recently, would have probably noticed me tweeting ecstatically that I was delighted about receiving a Lenovo P1 from @Joe Parker (Principal Engineer, Manager at Lenovo). This was the culmination of conversations held via twitter and email between myself and Joe, which basically started out from a need to replace my Hyper-v Lab. A month has come and gone and I’ve been busy working, and when I have time, getting my data migrated over from the old lab to the new, and now it’s pretty much done. A quick look at my previous lab But first, a bit of a background, my previous Hyper-v lab was an agi…
-
- 2 replies
- 7.4k views
-
-
Hi All, I am following SCCM CB guides by Niall which are excellent source of SCCM LAB setup & I recommend my juniors to start with it their SCCM journey. I saw SmoothWall as router for this ( or I think PKI Lab) & I configured it. I am able to get internet access to my VMs. The only irritating part is whenever I restart the VM (after doing poweroff from cmd prompt), while loading OS, I get prompt to reconfigure NICs as they have changed. I initially suspected this because I am using Hyper-V and NIC setting for MAC address was Dynamic which is default. I changed it to static but no difference. I still get the prompt. Is any other config change neede…
-
- 5 replies
- 5.8k views
- 1 follower
-
-
With Microsoft Ignite just around the corner, Windows Server 2019 is set to get its full release and the signs look good. Very good. Unless you’re part of the Windows Server insider program - which grants you access to the latest Windows Server Preview builds - you probably haven’t had a hands-on experience yet with Windows Server 2019 but the guys over at Altaro have and are preparing to host a webinar on the 3rd of October to tell you all about it. The webinar will be held a week after Microsoft Ignite so it will cover the complete feature set included in the full release as well as a more in-depth look at the most important features in Windo…
-
- 0 replies
- 3.2k views
-
-
Make sure you check out Altaro's contest where they'll be giving away Amazon eGift Cards to the first 100 eligible entries and 1 Grand Prize for 1 lucky winner. They have some fantastic options for the grand prize including a Playstation 4 Pro, a Microsoft Xbox One X, a 3-year membership of Amazon Prime and more, but it will be up to the Grand Prize winner to choose his/her Grand Prize. So in total, there will be 101 winners (if all are eligible entries). You can enter the contest by clicking here cheers niall
-
- 0 replies
- 3.3k views
-
-
Hi Everyone, I need help to compare my hyper v virtual machine state either its running or off. Please help me out in this. $status = (get-vm -ComputerName server1 -name "testmachine1" | select-object state) if ($status -eq "Running") {"equal"} else {"nequal"} i am new to powershell and done the above script, which is not working. Regards Ali
-
- 0 replies
- 2.9k views
-
-
Think containers are just for developers? Think again. Containers have recently gained massive industry adoption and many IT pros are now being asked to support this new disruptive technology. Are you in the know? Join us on April 24th for a very special webinar with the co-creator of Hyper-V, Microsoft’s very own Ben Armstrong. Andy Syrewicze from Altaro will be moderating this AMA-styled webinar with Ben to answer all your burning questions about containers in the Microsoft ecosystem. The discussion will include: Industry adoption of containers Container and micro-services examples Best practices for deployment The fu…
-
- 0 replies
- 3.1k views
-
-
Altaro just released a new version of their popular Altaro VM Backup and below is a list of what's new. Continuous Data Protection (CDP) With Altaro VM Backup 7.6, users can switch from running daily backups to a continuous data protection model yielding an improved Recovery Point Objective (RPO) of up to 5 minutes. When CDP is enabled, VMs can be backed up as frequently as every 5 minutes or the maximum frequency permitted by the backup location and environment. This ensures that in a data loss scenario only a few minutes of data would be lost. This dramatically reduces the Recovery Point Objective (RPO). RPO is the…
-
- 0 replies
- 3.8k views
-
-
Hello SysAdmins! You make sure all systems are working and go to great length of wizardry to keep everything running smoothly. Regular backups also help you to recover when disaster strikes! We're hosting a fun contest to show our appreciation. Download Altaro VM Backup and get a chance to WIN a Nintendo Switch! http://www.altaro.com/sysadmin-day/
-
- 0 replies
- 2.8k views
-
-
I wanting to start building a home lab using Windows 10 & Hyper-V, but I don't want to have to rebuild my lab every 180/90 days. Does Microsoft not Offer free/cheap licenses for Home Labs? I am not a student, but am a Tech looking to further my skills. What do you all do about licensing and such? I do have a MSDN Subscription through my employer but did not know about usage of those downloads/keys?
-
- 1 reply
- 5.3k views
- 1 follower
-
-
My present company is small size organization we have a decent configuration server of 72 GB RAM which at present acting as (OS:Windows Server 2008 R2) AD integrated DNS and print server, can we install hyper-v and host SCCM server under it????is it advisable to do so??? Kindly suggest!!!
-
-
- 3 replies
- 5.5k views
- 2 followers
-
-
Hi Every one, In this article I'll show you how to install ,configure and install your first virtual machine in the New Technology driven by Microsoft Hyper-V. Prerequisites: You will need windows server 2008 64bit which means your processor must support 64 bit operating system "Intel XD bit or AMD NX bit and supports data execution protection". Most of us has dual core processor and doesn't know that it can easily support 64 bit but the most important thing when talking about virtualization is does your processor supports virtualization or unfortunately not to . You need to test your processor for virtualization support before you can star…
-
- 11 replies
- 19.3k views
- 1 follower
-
