Jump to content


learningmode

Established Members
  • Posts

    54
  • Joined

  • Last visited

  • Days Won

    3

learningmode last won the day on May 25

learningmode had the most liked content!

learningmode's Achievements

Apprentice

Apprentice (3/14)

  • Dedicated Rare
  • First Post Rare
  • Collaborator Rare
  • Conversation Starter Rare
  • Week One Done Rare

Recent Badges

3

Reputation

  1. I wanted to update status.... I do not have a real solution to update. Although, things seems to be working now and Hybrid devices are enrolling now. The only thing that I could think of that maybe was a change, was enabling the "Microsoft Intune Enrollment" in the Mobility (MDM and MAM. I was told to just do "Microsoft Intune" and not worry about the "Microsoft Intune Enrollment" in the past. I could be wrong since it is working, either if it was because of that or other things. Thanks,
  2. The pass-through was enabled and downloaded, however didn't seem to fix the issue. Still investigating....
  3. Ah, I will check this. I do see the "Pass-through auth" is disabled. For this environment, Federation is enabled, would it matter? Would you think there would be an impact if having both federation and pass-through enabled? Also, the environment does have Okta, so, i'm not sure if that is oddly causing any problem.
  4. Continuing troubleshooting...... Double checked the Azure AD Connect to see proper synchronization of the user and device OU's. Which they are correctly checked. For kicks, Grabbed device that is not domain joined, and manually azure joined the device. It was success and the device shows up enrolled to Intune. Here is another problem: When tried to log into the device, it does not recognize the credentials. Even the same credential used to join the device. There was another device that had been AAD Joined in the past, so grabbed that device and tried logging into it..... Same thing, does not recognize the credentials. So, it leads me back to the Azure AD Connect sync??? Something is not right with the users side of the house ============ Anyone has any idea what it could be? Thanks,
  5. Hi everyone, I tried searching for this before posting, but didn't see any. So, here we go... Issue: Trying to have domain devices enroll into intune (hybrid join). What I am not seeing when I look at "dsregcmd / status" are the mdmURL's that should be displayed in there. ======================== What has been checked: Configuration side: Windows Enrollment for MDM user scope is set for "All" and MAM user scope is none. Azure AD Connect is synced to the OU with particular Devices Created GPO and enabled "enabled automatic enrollment using default Azure AD credentials" and have User Credentials set. GPO is linked to the particular OU Users are licensed with MSFT E3 Device side: Confirmed device receiving GPO Seeing error event ID 76 in the event log dsregcmd /status does show Domain joined: Yes and Azure Joined: Yes ======================== Question / statement: Am I missing anything? One thing to note, that i'm not sure makes a difference is that the environment does have SCCM / co-managed. I don't see if that makes a difference. To me, i'm leaning towards something with users... because the MDM User scope is what should bring the URL, if I am thinking correctly. Thanks,
  6. I just wanted to update that I did in fact were able to get my VM back. Enough to log in and see my data again and back up. As always... thank you @anyweb
  7. Oh wait... I might have figured it out, you just select the folder level and not select any specific file type. Ran into some errors but working through it.
  8. Ah, gotcha. So, when I go to Import > select location folder, it doesn't see the VMCX or VMGS file's. Screenshot below shows the path i took and the right window shows there are files in there.
  9. Thanks for the quick response @anyweb yeah, I tried the import option and it didn't recognize any of the files in the snapshots or virtual machine folders that I have. I'm guessing it won't see it unless you had exported the VM previously. I may have to bit the bullet and just start fresh again... ouch!
  10. Hi Intelligent guru's, I have a question with my current scenario. I recently had to reload my windows OS that I was hosting my Hyper-V VM's on. I stored my Hard Disk Image File and AVHDX File, and also my Virtual Machines snapshots in a separate partition. Is it possible to create the new VM's with the existing snapshots? I am able to attach the HDI files, but that only takes me to the base load. When I try to attach AVHDX file, it errors. I'm just not too sure where to begin. Thanks,
  11. Hey Folks, I've been pondering some time what is the best method to create a shared calendar for conference rooms. I have been utilizing the Resources > 'Rooms & Equipment' from the Admin portal. But recently, I was wanting to add the conference room calendars to the Intranet sharepoint site. It appears you can not do so from the Resource section. Versus if you create a conference room from Microsoft 365 groups, then you can use the "Group calendar" within sharepoint and choose the specific conference rooms from there. Also, you would be able to make that group a dynamic group, so it would automatically add the members to the group. I just wanted to get some of your opinions what you guys think. The big win for me is utilizing the dynamic group to add to the calendar vs always have to add / remove members to the Resources rooms manually. My take and please correct me if i'm wrong. ==================== Rooms & Equipment Negative: Can not dynamically add members to the calendar for permissions. Can not add calendar to the Sharepoint site (company intranet). Pros: Easy and fast to use ( I just wanted to put something in pro for this, but can't really think of one) ==================== Microsoft 365 Group Negative: I do not like how the group would now show under TEAMs Pros: You can create dynamic users to automatically add members for permission to calendar Can be displayed in Sharepoint 'Group Calendar' ====================
  12. **UPDATE** Okay, what worked for me was reading through this article https://timmyit.com/2018/12/17/mdm-join-an-already-azure-ad-joined-windows-10-pcs-to-intune-with-a-provisioning-package/ I already had an RMM in placed for my side of things, so, I just used the Powershell script that he had and pushed that out to all the devices. Once I did that, all the devices started to enroll into Intune. Learning Experience: Keep Note: If you started off with MSFT standard license and down the road you upgrade to a premium license. The above resolution will most likely fix your problem. I have attached zip file just in case Timmy site down the road goes offline. MDM_File.zip
  13. Not in the Device Event logs itself. But I have read some where that if the existing devices were Azure AD joined already with the standard license, then you upgrade to the intune licenses... The existing devices will not automatically join. I'm trying to look around and confirm that as we speak. That might explain why it wouldn't work and if I manually unjoin the device and rejoin them, it will then enrol
  14. Hi Everyone, I've tried to do some searches here but didn't narrow down to my solution. Story: I've updated my licenses and upgraded Standard to now Business Premium, which now I would be able to enroll and manage my devices. Issue: None of the devices that are currently Azure AD Joined are enrolling into Intune. They still show MDM none and N/A for Compliant. Now, if I would disconnect the user from the device and azure join them again, then the device will become compliant and enroll into intune. Spot checked: verified licenses for the users. verified auto-enrollment for all users enabled MDM. verified on several devices for the Device state to confirm azure AD joined and URL. verified the Device settings that all users can join devices. Checked enrollment restrictions. My Question: It is odd to me that if I Azure AD join a device now, it will work, but none of the current legacy devices before the license upgrade would auto enroll. I prefer not going to each machine and have the users unjoin and rejoin for this to work. Is there anything i'm missing or not catching? Thanks,
  15. Hi, I'm just tapping into Intune and was curious if we can manage Workgroup machines? Thanks,
×
×
  • Create New...