Jump to content


Sign in to follow this  
Mishuri

Client installed but no connection to server nor SoftwareCenter

Recommended Posts

Hello,

I have the following failure. We install the SCCM-Client as Pushinstallation/manual installation, some of the installations works, but the most of them just crashs without a real error code.

While we install we get the following "red" messages in the ccmsetup.log:

Quote

Failed to receive HTTP response. (Error at WinHttpReceiveResponse: 0x80072f78)    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
WinHttpRequestReponse failed with a non-recoverable failure, 0x80072f78    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
GetDPLocations failed with error 0x80072f78    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
Failed to get DP locations as the expected version from MP 'sccm-01.domain.com'. Error 0x80072f78    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
Failed to find DP locations from MP 'sccm-01.domain.com' with error 0x80072f78, status code 200. Check next MP.    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
Only one MP sccm-01.domain.com is specified. Use it.    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)
Have already tried all MPs. Couldn't find DP locations.    ccmsetup    20.10.2017 09:38:44    2164 (0x0874)

After that the installation starts (GET 'HTTP://sccm-01.domain.com/CCM_Client/ccmsetup.cab'    ccmsetup    20.10.2017 09:38:44    2164 (0x0874))

Quote

File 'C:\WINDOWS\ccmsetup\WindowsFirewallConfigurationProvider.msi' does not exist. Discovery failed.    ccmsetup    20.10.2017 09:38:45    2164 (0x0874)

Quote

MSI: Aktion 09:39:15: SmsGenerateFailureMIF.     ccmsetup    20.10.2017 09:39:15    2164 (0x0874)

MSI: Aktion 09:39:15: GenerateScript. Skriptoperationen werden generiert für Aktion:    ccmsetup    20.10.2017 09:39:15    2164 (0x0874)
MSI: Aktion 09:39:15: SmsGenerateSuccessMIF.     ccmsetup    20.10.2017 09:39:15    2164 (0x0874)

Quote

MSI: Warnung 25702. Failed to uninstall PrepDrvr.Sys for Software Metering Agent.    ccmsetup    20.10.2017 09:39:29    2164 (0x0874)

Last information of the ccmsetup.log ->
<ClientDeploymentMessage ErrorCode="0"><Client Baseline="1" BaselineCookie="" Platform="2" Langs="LP1031"/><Packages><Package ID="{22D00A83-1685-43CF-A3E2-C3E38C3F8CF1}"/></Packages><Additional><SourceType Value="MP"/><SourceLocation Value="HTTP://sccm-01.domain.com/CCM_Client"/><DeploymentMethod Value="1"/></Additional></ClientDeploymentMessage>    ccmsetup    20.10.2017 09:40:26    2164 (0x0874)
Raised pending client deployment state message.    ccmsetup    20.10.2017 09:40:26    2164 (0x0874)
Successfully deleted the ccmsetup service    ccmsetup    20.10.2017 09:40:31    2164 (0x0874)
Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml    ccmsetup    20.10.2017 09:40:31    2000 (0x07D0)
Task 'Configuration Manager Client Upgrade Task' does not exist    ccmsetup    20.10.2017 09:40:31    2000 (0x07D0)
CcmSetup is exiting with return code 0    ccmsetup    20.10.2017 09:40:31    2000 (0x07D0)

 

The Quoted part are the red messages.
We extended our AD-Schema, the Boundarie is set, the FallBackBoundarie is set to sccm-01.domain.com.
The Client doesnt creat a shortcut under start, when I start the Configuration Manager under controll, I see a deactivated "CCM-Notifaction-Agent", the other components are installed.

I hope someone got a good advice for me..

Greets, Mishuri

 

*Edit: I probably find the error/a log entry. In ClientIDManagerStartup i get the following error:
 

Quote

[RegTask] - Client is not registered. Sending registration request for GUID:D3240632-E7C2-4C46-B165-4B99CEF3838B ...    ClientIDManagerStartup    20.10.2017 10:34:39    11420 (0x2C9C)
RegTask: Failed to send registration request message. Error: 0x87d00231    ClientIDManagerStartup    20.10.2017 10:34:39    11420 (0x2C9C)
RegTask: Failed to send registration request. Error: 0x87d00231    ClientIDManagerStartup    20.10.2017 10:34:39    11420 (0x2C9C)

To test if the firewall is blocking something, we opened the traffic between our clients and the sccm on any Ports. (Failure/Error still up:( )

Edited by Mishuri

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...