Skip to content

Active Directory

active directory related material..

Subforums

  1. want to make a domain wide change ? try a Group Policy !

    • 107 posts
  1. Started by wash,

    How can I extend the Active Directory schema in Windows Server 2003?

  2. Started by TomF,

    Hey everyone, I had a quick question about a situation that I think would cause AD and/or SCCM issues but couldn't really find much to back it up or prove otherwise. I work for a school division and we occasionally have the odd computer hardware issue. We then take the hd and place it in a working machine and put the new computer back in the classroom to get them back up and running faster while we work on the defective machine. My question is, does a simple remove from domain/re-add to domain completely resolve any AD issues? Or does the machine have to be re-imaged through SCCM to make sure everything is fine? I'm also curious if SCCM would have any issues wi…

  3. Started by Finamore,

    Hi Folks, I’m working on this problem for the last 2 months, and so far I couldn’t found a good solution for it. Our infrastructure is composed of two sites: Our Office and a Datacenter service we hired. These two sites talk to each other through an IPSEC VPN. On our site we use subnet and IP addresses we defined, but in the Datacenter the IPs and subnets are provided by the vendor. Here is where the problem lies: Our server can see everything just fine on the DC side, but the server on the DC cannot see the server on office side. The way they work is that you need to make one NAT translation for each server, and use this IP provided on the NAT to access. Usi…

  4. Well the title says it all. I used the instructions on this site to setup all the above. (Thanks to all for that) Now my boss wants me to deploy this test machine to our clients just to show that it works. We are thinking of using it as a ADC at our clients premises. Unfortunately, in our test environment, we created a domain with the same name as our clients current domain. I am confused if I can add an ADC with the same domain name or do I have to change the name to something else before I add it as ADC. Complete noob here. Cheers

  5. Started by hyd.aslam,

    Hello everyone, i need the information about windows server 2003 services and their dependencies in detail. please suggest me a good website for this. Thanking you byee

  6. Started by wash,

    How can I create the System Management Container in Active Directory? (Windows 2k3)

  7. Started by anujsharma,

    can any one tell me what is the default size of ndts.dit in server 2008

  8. Hello to all, I have a domain controller, then I added a second one (additional DC); I'm just wandering what's the correct configuration for the primary DNS server and alternative DNS server; I mean witch ip should be first one for the additional dc, the loopback address or the ip address of the first dc? Right now I changed the order of ip's on the additional dc; I've put the localhost address to be the primary then the ip of the first dc to be alternative, so that the additional dc will not forward traffic to the firs one. Thanks

  9. Started by kmercer6,

    I was wondering if anyone has found a good guide ADMT 3.2 guide versus the 263 page document that Microsoft puts out?

    • 0 replies
    • 4.5k views
  10. Started by kmercer6,

    I have created 2 different AD Forest/Domains each has its own DNS server. I have these on 2 different Virtualbox VMs and would like to setup a trust between the 2 to test ADMT 3.2. First Forest/Domain is contoso.com Host Name: Server01 Primary Dns Suffix: contoso.com IP:10.0.0.11 Subnet:255.255.255.0 Gateway:10.0.0.1 DNS Server: 127.0.0.1 Second Forest/Domain is bimfirm.com Host Name: Server01 Primary Dns Suffix: bimfirm.com IP:10.0.0.50 Subnet:255.255.255.0 Gateway:10.0.0.1 DNS Server: 127.0.0.1 I have turned off both firewalls on each of the VM's. Both are set to internal network in Virtualbox and I can ping back and forth between the VM'…

    • 3 replies
    • 6.1k views
  11. Hello there, My issue is that I need to know if renaming a computer on a domain can be restricted / permitted via AD. My boss will not allow me to be a memeber of a particular group and wants me to find out which perameter I need to be able to rename computers I build. At the moment I use my admin account and receive an access denied message for computers already on our domain. Any suggestons?

    • 3 replies
    • 14.5k views
  12. Started by Dwilson,

    First off I would like to say that this site is great. I have been a member here for a short time and have found myself coming back to reference material more and more.Two thumbs up!!!!!! Now on to my issue. I have setup a few Security Groups in AD for SCCM application deployements. Everything has been tested and works great. Today I received a spreadsheet with the list of users our business needs the application deployed to. There are over 800 users needing the deployment (yikes). I would like to find a way to automate this process based off of the spreadsheet I have been given. I know that some of you have probably been down this road before and would like to hear…

  13. Started by crunch,

    We have a separate forest and a separate domain from our primary domain. We're unable to resolve DNS names to this other domain. We can only get to these machines with IP Addresses. Where in DNS, do I map the IP to DNS Names for this other domain? Thank you

    • 1 reply
    • 4.2k views
  14. Hi, I have deployed Win7 Enterprise x64 using MDT 2010(On Server 2008 R2). The OS gets deployed successfully. I want to encrypt the drives using BitLocker which i have configured in the Task Sequence. After installing the OS, drives get BitLocker encrypted. However, the recovery keys are not uploading on the AD. The keys are there on the Client system in the encrypted drive. How do i get them on the AD for easy recovery at a later stage? I have run the Add-TPMSelfWriteACE.vbs as specified here: http://technet.microsoft.com/en-us/library/cc766015(WS.10).aspx. Also i have enabled the Group Policies to upload the TPM and BitLocker keys on AD. Can anyone t…

  15. How can I install SCCM 2007 client on workgroup machines? And how can I manage these machines?

    • 1 reply
    • 6.9k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.