Jump to content


bman

Established Members
  • Content Count

    25
  • Joined

  • Last visited

Everything posted by bman

  1. That is a good idea but my problem is that they travel a lot and are intermittently online in hotels, etc. Actually I did notice that mine completed when on WiFi but in the SCCM reports shows a failure.
  2. I am trying to figure out how to update remote Windows 10 users who VPN in to feature update (1809). For users located on the LAN I have a task sequence that runs and does the update but for users connecting in with the VPN over a WAN the amount of data that is required to do the update would take too long when connecting by way of VPN. Has anyone figured out the best way to solve this?
  3. I am going to be imaging multiple hard drives off of one PC. We use SCCM 2012 and there is the issue of duplicate MAC addresses in SCCM once I image one drive. SCCM will see the MAC address of the PC and won't let me create another one off the same PC. There is a way to enter a MAC address in the registry on the SCCM server that will exclude it from being entered into the SCCM database. The MAC entered in the registry would be the dongle MAC. This article explians it better: https://blogs.technet.microsoft.com/system_center_configuration_manager_operating_system_deployment_support_blog/2015/08/27/reusing-the-same-nic-for-multiple-pxe-initiated-deployments-in-system-center-configuration-manger-osd/
  4. Hello, Has anyone been able to PXE boot EliteBook 840 series laptops with a Ethernet to USB dongle? I am using an HP branded USB to Ethernet dongle (N7P47UT). I have added the drivers to the boot image and updated the BIOS to the current version.
  5. I need to find a way to deploy Windows 10 to multiple hard drives using the same PC with SCCM 2012. Since SCCM uses the MAC address as the identifier after one drive is imaged the next can't be done since it will show the same MAC address. Does anyone have any ideas?
  6. SCCM Version 1702. Trying to set the schedule on a DP to restrict when data can be sent. I can set the availability for certain days of the week so they allow only high priority but once I apply and click OK and open the DP to look at the settings the changes I made are gone. Anyone have any ideas as to where I should look at solving this?
  7. I should be able to just create the Software Update Group (which I did) and then once created right click and choose Deploy, select the collection to deploy to along with some other questions and it normally is all set after that. No need to create a package.
  8. keilamym, When I do that it wants me to select or create a deployment package.
  9. Hello, I have SCCM 2012 and have created a Software Update group to deploy Windows 10 updates. The group is created but in the Downloaded column shows No for all but two updates. It has synced with our WSUS server and the wsyncmgr.log file shows things such as Skipped Update for Windows 10....KB number because it is up to date. How do I get the updates to show downloaded?
  10. I have a Microsoft Surface Book and a Surface. Both of course have SSD drives. I also have a HP Laptop that has a SSD drive in it and both laptops and desktops that have mechanical drives in them. I am imaging them with SCCM 2012. When I install the image everything works OK with the exception of the Surface Book and the Surface. On those everything is fine but the System Protection (system restore) is set to off where on all the other ones I image as described above have it turned on. I have an answer file that has it set to be on. Any ideas as to why it is off on the MS surfaces?
  11. So you used DISM to add the drivers for the USB 3.0 eXtensible Host Controller and the NIC along with the two KB ones? That is what I did. Added them to the custom WIM I have.
  12. So the BIOS update fixed it? Did you add the softpaqs and drivers to a custom WIM file in MDT?
  13. Has anyone had experience using MDT 2013 to image an EliteBook 840 G3 with the solid state drive with NVM Express? I am trying to install Windows 7 Enterprise 64 bit using MDT 2013. I can drop the image but when it boots back up after Windows is installed the Windows flag starts to appear and then it freezes. I have integrated these into the custom WIM file. KB2990940 and KB3087873 and also the USB 3.0 driver according to the HP document C05040446. Any suggestions that I can try?
  14. Hello, I am trying to image an HP EliteDesk 705 G2 using MDT 2013 ver 6.3.8330.1000. I am using a task sequence that defines what drivers are downloaded based on make and model. Installing Windows 7. It works for every model we image with the exception of the 705 G2. It does not download the drivers as I can see it does with all the other models. Has anyone else had this problem with this model? smsts.log
  15. Hello, I am upgrading Windows 7 that has Office 2010 installed to Windows 10 and trying to upgrade to Office 2016 in the process. I am using MDT 2013 Update 1 with the standard upgrade task sequence. Windows updates just fine but Office 2016 never gets installed and Office 2010 is still installed after the upgrade completes. I don't see anything in any of the log files pertaining to the Office task. Office 2016 gets installed while doing a clean bare metal install of Windows 10.
  16. I customized things such as the task bar, explorer, computer icon on the desktop, etc. When I say I copied the profile I set up the reference image logged in as local admin and did the customizations under that profile. Then captured it. In the answer file I had copy profile set to true in the specialize pass.
  17. LOL, thanks but how do I get the other settings that I customized in the base image if I don't use the copy profile in the answer file?
  18. Hello, I am deploying Windows 10 to a new PC with MDT 2013 Update 1. I have customized the Start Menu to only show the apps I want instead of the default ones and using powershell exported the menu settings as an XML file. In the task sequence for the deployment I have a powershell script running to import the xml file and set the start menu to the way I want. Everything works as long as I have the copy profile set to false in the answer file. If I set it to true the start menu is not as the xml file sets it. Any ideas as to what I need to do to get it working with the copy profile set to true?
  19. Hello, I am deploying WIndows 7 with SCCM 2007 and as part of the task sequence installing a language pack offline. Everything works correctly but the copy profile is not working even though I have it set to True in my unattended file. Using the same unattended file without adding the language pack works correctly and the copy profile works. Any ideas as to why this is not working?
  20. Hello, I have two partitions that get set up in my task sequence of SCCM 2007 with MDTSP1 to deploy Windows 7 along with a language pack. I get the following error that looks like it is a problem installing the language pack caused by having two partitions. The language pack install fails. I have attached the ZTIPatches.log. Thanks for any help. ZTIPatches.log
  21. Hello, I am having an issue with a package(wim file) on a distribution point. Originally I had deleted the package but it hung and although it does not show the distribution point anymore the files are still on the distribution point. I then created a new dist point and now the package is in a loop telling me it can't read the source files. The thing I don't undrstand is that I created a dist point on another server with no problem.Here is a copy of the distmgr.log file. The number of free K bytes 70018064 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Successfully made an accessible connection, got a NOS path, and, if requested, got the number of free bytes at this location. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Attempting to make an accessible connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSSIG$\, get its NOS path, and get its number of free bytes. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Established connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSSIG$\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Getting the NAL path's NOS equivalent. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) The NOS path is \\PA1MSDC1\SMSSIG$\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) The number of free bytes at the specified location has not been requested. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Successfully made an accessible connection, got a NOS path, and, if requested, got the number of free bytes at this location. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:00 PM 4160 (0x1040) Successfully set access security on MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\ for package DC100033 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) GetPackageSignature() called for package DC100033 with version 3. UnpackedSignature = 0 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) RDC:Binary update DP \\PA1MSDC1\SMSPKGE$\DC100033\ using DP version 2, Source version: 3, Source: C:\OSImg\W7x64ENTClean\W7x64ENTClean.wim SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) RegisterSignatureUsage() called with for Package DC100033, Version 3 with Targetpath as \\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) C:\SMSPKGSIG\DC100033.3 already exists SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) Unpacked folder for package version DC100033.3 is being used by 1 user(s) currently SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) RegisterSignatureUsage() called with for Package DC100033, Version 2 with Targetpath as \\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) C:\SMSPKGSIG\DC100033.2 already exists SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) Unpacked folder for package version DC100033.2 is being used by 2 user(s) currently SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:04 PM 4160 (0x1040) Used 1 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:10 PM 6024 (0x1788) Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 1/11/2012 1:53:10 PM 6024 (0x1788) failed to read complete data from file SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) FileReader failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) failed to read source SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) CopyContents failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) CreateRdcDelta failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) CreateRdcFileDeltaW failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) UpdateStagedFile failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) UpdateStagedFolderRdcW failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) Cannot copy package DC100033 from C:\OSImg\W7x64ENTClean\W7x64ENTClean.wim to \\PA1MSDC1\SMSPKGE$\DC100033\, Win32 Error = 0 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) Failed to copy package DC100033 from C:\OSImg\W7x64ENTClean\W7x64ENTClean.wim to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) STATMSG: ID=2328 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=DC1MS078 SITE=DC1 PID=1500 TID=4160 GMTDATE=Wed Jan 11 19:56:29.991 2012 ISTR0="DC100033" ISTR1="C:\OSImg\W7x64ENTClean\W7x64ENTClean.wim" ISTR2="MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="DC100033" AID1=404 AVAL1="["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\" SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:29 PM 4160 (0x1040) Error occurred. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4160 (0x1040) Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4160 (0x1040) DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) DP thread with thread handle 5668 and thread ID 4160 ended. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) Updating package info for package DC100033 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) Only retrying local DP update for package DC100033, no need to replicate package definition to child sites or DP info to parent site. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) StoredPkgVersion (0) of package DC100033. StoredPkgVersion in database is 0. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) SourceVersion (3) of package DC100033. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=DC1MS078 SITE=DC1 PID=1500 TID=4076 GMTDATE=Wed Jan 11 19:56:30.268 2012 ISTR0="W7x64ENTClean" ISTR1="DC100033" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="DC100033" SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) Failed to process package DC100033 after 8 retries, will retry 82 more times SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:30 PM 4076 (0x0FEC) Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 6024 (0x1788) Starting package processing thread,thread ID = 14CC SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 6024 (0x1788) Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 6024 (0x1788) STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=DC1MS078 SITE=DC1 PID=1500 TID=5324 GMTDATE=Wed Jan 11 19:56:40.438 2012 ISTR0="DC100033" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="DC100033" SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) Retrying package DC100033 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) No action specified for the package DC100033. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) Start adding package to server ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\... SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\ is NOT a Branch DP SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) No action specified for the package on server ["Display=\\DC1MS078\"]MSWNET:["SMS_SITE=DC1"]\\DC1MS078\. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) Thread Handle = 5956 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 5324 (0x14CC) Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 2712 (0x0A98) for ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\, machine account is to be used SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 2712 (0x0A98) STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=DC1MS078 SITE=DC1 PID=1500 TID=2712 GMTDATE=Wed Jan 11 19:56:40.492 2012 ISTR0="W7x64ENTClean" ISTR1="["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="DC100033" AID1=404 AVAL1="["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\" SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 2712 (0x0A98) Established connection to ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:40 PM 2712 (0x0A98) Signature share exists on distribution point path MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSSIG$\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:41 PM 2712 (0x0A98) Found the existing package path on MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:41 PM 2712 (0x0A98) for ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\, machine account is to be used SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:41 PM 2712 (0x0A98) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:42 PM 2712 (0x0A98) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:42 PM 2712 (0x0A98) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:42 PM 2712 (0x0A98) IISSSLState in the SCF is 0. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:42 PM 2712 (0x0A98) Virtual Directory SMS_DP_SMSPKGE$ for the physical path E:\SMSPKGE$ already exists. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:46 PM 2712 (0x0A98) for ["Display=\\PA1MSDC1\"]MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\, machine account is to be used SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:46 PM 2712 (0x0A98) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:47 PM 2712 (0x0A98) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:47 PM 2712 (0x0A98) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:47 PM 2712 (0x0A98) IISSSLState in the SCF is 0. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:47 PM 2712 (0x0A98) Virtual Directory SMS_DP_SMSSIG$ for the physical path E:\SMSSIG$ already exists. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Get access to the package directory and the number of free bytes at that location. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Attempting to make an accessible connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\, get its NOS path, and get its number of free bytes. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Established connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Getting the NAL path's NOS equivalent. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) The NOS path is \\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Getting the number of free bytes. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 2712 (0x0A98) Used 1 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 6024 (0x1788) Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:50 PM 6024 (0x1788) The number of free K bytes 70018056 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Successfully made an accessible connection, got a NOS path, and, if requested, got the number of free bytes at this location. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Attempting to make an accessible connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSSIG$\, get its NOS path, and get its number of free bytes. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Established connection to MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSSIG$\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Getting the NAL path's NOS equivalent. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) The NOS path is \\PA1MSDC1\SMSSIG$\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) The number of free bytes at the specified location has not been requested. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Successfully made an accessible connection, got a NOS path, and, if requested, got the number of free bytes at this location. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:51 PM 2712 (0x0A98) Successfully set access security on MSWNET:["SMS_SITE=DC1"]\\PA1MSDC1\SMSPKGE$\DC100033\ for package DC100033 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) GetPackageSignature() called for package DC100033 with version 3. UnpackedSignature = 0 SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) RDC:Binary update DP \\PA1MSDC1\SMSPKGE$\DC100033\ using DP version 2, Source version: 3, Source: C:\OSImg\W7x64ENTClean\W7x64ENTClean.wim SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) RegisterSignatureUsage() called with for Package DC100033, Version 3 with Targetpath as \\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) C:\SMSPKGSIG\DC100033.3 already exists SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) Unpacked folder for package version DC100033.3 is being used by 1 user(s) currently SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) RegisterSignatureUsage() called with for Package DC100033, Version 2 with Targetpath as \\PA1MSDC1\SMSPKGE$\DC100033\ SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) C:\SMSPKGSIG\DC100033.2 already exists SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) Unpacked folder for package version DC100033.2 is being used by 2 user(s) currently SMS_DISTRIBUTION_MANAGER 1/11/2012 1:56:55 PM 2712 (0x0A98) Used 1 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 1/11/2012 1:57:00 PM 6024 (0x1788) Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 1/11/2012 1:57:00 PM 6024 (0x1788)
  22. Hello, I am having a hard time getting the vendor drivers to be used with Windows 7 Enterprise OS deployment. I have the Apply Drivers set up to use drivers based on the WMi condition. Some correct drivers get installed and some do not. I have gone through this several times creating new driver packages and making sure I am using the correct drivers. I have even checked the inf files for the correct hardware id's. Where should I be looking to get clues as to what is going on? I have attached a picture of my task sequence. Any help would be greatly appreciated.
  23. I am deploying Windows 7 with SCCM and when I specify a driver package under Apply Drivers I get an error installing the OS that a package referenced by the task sequence is not available. When I use Auto Apply Drivers it works? Is it a permissions issue?
  24. Hello, I am sending a driver package for one model of computer to a distribution point. The drivers are in separate folders in the source directory but when I choose the distribution point to send the driver package to it copies all drivers to the distribution point not just the drivers that are in the source folder. Shouldn't it only copy the drivers for that specific package only that are contained in the source folder?
×
×
  • Create New...