Jump to content


Scottpowers82

Established Members
  • Content Count

    23
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Scottpowers82

  • Rank
    Member

Recent Profile Visitors

810 profile views
  1. Skissinger, Thanks for the app recommendation as I had never heard of those ones before! I'll give them a shot and report back what I can find out... Thanks!
  2. So a couple updates / notes:- I went ahead and tried removing all GPO settings I had related to updates, did a GPUPdate /force on my test VM and re-ran both Software Updates Deployment Evaluation Cycle and Software Updates Scan Cycle...no luck- In addition to the Windows Malicious Software Removal Tool being installed correctly, I have also noticed that Windows Defender updates are installing normally even though I'm not actually pushing out those via SCCM, so I assume those are coming directly from Microsoft- I reimaged my test VM just to make sure it wasn't something in my VM as well as chec
  3. Hello, Apologies if this is a repeat thread, but I haven't been able to find the correct info I'm looking for here or anywhere else on the web. Have been using SCCM for quite some time, but only recently started using the SUP portion of it. I have created a Software Update Group with 119 updates contained in it (Essentially all Windows 10 Updates) as a base line to push out to my machines to make sure that they are as up to date as possible. However, the only thing that appears in the Software Center is the Windows Malicious Software Removal Tool. I have a few Windows 7 machines still
  4. So looks like I didn't need the script after all. Never realized that SCCM does in fact with ADM files so you can use them for your GPOs to assign a management point. They are located in the Tools folder under your install path of SCCM. I just my setting in place, so we'll see if that fixes the issue, but thought I'd post this in case in is usefull for anyone else looking for them...
  5. So, it looks like my clients that are pointing to the old system won't automatically pick up the new one from wha tI have seen so far on a machine I am testing. In fact, when I got into "Site" tab on my test machine that didn't even have an entry for the "currently assigned site code", I tried hitting the Find Site button and it didn't seem to find my site automatically. Once I manually typed in my site code though and applied the settings, the correct information populated in the General tab. At least now it is pointing to the right site code and I can get access to the machine from within
  6. Thanks everyone for your help! I just deleted all of the entries in my System Management container that refered to the old site code and then gave full permissions over the container to my new server. We'll see if that does the trick. On the same note though, a quick question to anyone out there...if I have installations out there of the client that are looking for the old Site code and, therefore the old server, do you think they will now automatically pick up the new site code? Or would they also need a reinstall of the client? I'm hoping for the former, but I can work with the la
  7. SMoRZ3, I think you may be onto something here... I didn't find the registry entry you mentioned. However, when looking at ADSI in the System Management container, I am seeing references to the old server. I've used ADSI in the past, but not too often...am I ok to probably just delete all of the references to the old server and old site code in there? If I remember correctly when I first setup SCCM (several years ago), I had to give ownership I think to this container somehow. Do you know the steps for that? Or is it just a matter of giving the comptuer name of my new server ful
  8. Hello, Ok, I am trying to figure out a somewhat wierd issue that I've been having for sometime now that I think I finally have a handle on as to what is causing my issues. I'll try to be breif... Several months ago, we moved from SCCM 2012 to current branch (on 1710 now). During that move, I was also asked to migrate the server from one host to another with a new server name (old one was just "SCCM", new one is "WCSSCCMS01") along with a new IP address. I did a fresh install of Windows Server 2016 along with the CB of SCCM and migrated the data over from the old server using the M
  9. OK, so not sure why, but the original error I was getting seems to have gone away on it's own (yay!). However, a new one seems to have popped up in it's place. When running the same command now against my old SCCM server, I now get the following message: Analyzing local files, 100.00 % complete... Loading package data from provider... Loading local package data... Loading distributed packages from provider... System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ConfigurationManager.ContentLibraryCleanup.CLContentLibrary.LoadOrphanData(Boole
  10. Hi all! So I am working to migrate my old SCCM 2012 R2 install to a new server while also upgrading to the 1702 version on a new Server 2016 install. I have the new server setup and upgraded to 1702. I also upgraded my old system to the 1606 version. Before I actually migrate my data, I am trying to do some cleanup on the old server so I don't bring over all the extra "fluff" that I don't need from the old system. So, thankfully, I am trying the new ContentLibraryCleanup tool in 1702 and running it against my "old" 1606 install. The tool seems to run fine, but I am getting the follow
  11. Hi all! So I am working to migrate my old SCCM 2012 R2 install to a new server while also upgrading to the 1702 version on a new Server 2016 install. I have the new server setup and upgraded to 1702. I also upgraded my old system to the 1606 version. Before I actually migrate my data, I am trying to do some cleanup on the old server so I don't bring over all the extra "fluff" that I don't need from the old system. So, thankfully, I am trying the new ContentLibraryCleanup tool in 1702 and running it against my "old" 1606 install. The tool seems to run fine, but I am getting the follow
  12. Thanks for the suggestion thadkew, but it was a no go. Even after making sure BIOS was correct, still wouldn't quite work for me. Think I'm just gonna have to call Acer and see if they'll send me a replacement unit. The laptop works fine otherwise, just can't seem to image it. Should be an interesting phone call...
  13. Hello, I'm running into an issue I just can't seem to get past. We are starting a 1:1 computer program here at my school and we just received roughly 500 laptops (Acer TravelMate B117-MP). Since they have no ethernet ports, I decided to just go ahead and image them with flash drives and then just join them to domain via wireless once they finish taking the image. We've gone through over a 100 machines so far and most have not have not had issues. However, I am running into a handful that just won't image. They boot up from the flash drive and then, once they get into the WinPE enironment, the
  14. Hello All! I hope someone out there can help me with the current issue I am facing as I have been unable to find a solution and need some help. In creating our Windows 10 image, I removed most of the built-in provisioned apps, including the Windows Store, as it was always more of a nuisance in Windows 8/8.1 than anything else and nobody used it and we officially didn't have a reason to use it. So, I removed the Apps (and Store), sysprepped the image, captured it and have been deploying it (rather smoothly I might add) since then. However, now that we are on Windows 10 and the schoo
  15. Hello all! I've been trying to figure something out and I just can't seem to find the info I need, so was hoping someone here might have the answer. I currently have a Windows 8.1 image that has been deployed to both students and staff. While Office 2013 ProPlus is included in the image, we didn't realize that Windows 8.1 also comes with it's own personal version of the OneNote app (not making the same mistake in my Windows 10 image), which doesn't seem to work with our business version of Office 365. Therefore, I'm trying to figure out a way to set the desktop version of OneNote 2013 as the
×
×
  • Create New...