Jump to content


anyweb

How can I upgrade to System Center Configuration Manager Current Branch version 1902

Recommended Posts

Introduction

In a previous set of guides you used PowerShell scripts to quickly install System Center Configuration Manager (Current Branch) version 1802 and then upgraded it using Updates and Servicing to System Center Configuration Manager (Current Branch) version 1810.

Configuration Manager has a rich history that is nicely explained in the following graphic (from Twitter).

DsjxJLNUcAM0Sq3.jpg

Tip: You have rights to use System Center Configuration Manager (SCCM) to manage clients covered by the EMS license. Make sure you stay on current branch to receive benefits of Microsoft cloud, more info here.

In case you are not already aware there are two main branches (of Configuration Manager) available:

  •     System Center Configuration Manager (Current Branch)
  •     System Center Configuration Manager (Technical Preview)

System Center Configuration Manager (Current Branch) is designed for use in production environments, for managing anything from small to very large Enterprises, whereas System Center Configuration Manager (Technical Preview) is for lab testing environments only and is limited to 10 clients. The Technical Preview releases are released monthly, and contain the latest and greatest features being trialed in the product, and usually these new features are the result of feedback from uservoice. Current Branch releases on the other hand are released only a few times per year and contain stable, tested features that are mature enough to release into production environments.

New baseline release

Microsoft have released the latest Current Branch offering known as Update 1902 for Configuration Manager current branch so it's time to upgrade again. This release is the new baseline release (and will of course be uploaded to MSDN and VLSC soon). To understand what baseline releases are and why they are important see this post.

Baseline releases media are used when doing New installs or upgrades from supported versions of SCCM.

Checklist

Before starting the upgrade, please verify that you have read the checklist from Microsoft here.

Upgrading to 1902

When new Current Branch releases are made public, you have the choice of getting it immediately using a fast ring PowerShell script, or to wait a couple of weeks until it is made available to the slow ring (and then show up in the ConfigMgr console). To use the fast ring PowerShell script, download it, and run it to self-extract to C:\EnableFastRing1902. Once extracted, start a PowerShell cmd prompt in that folder and from there use the following command (where CM01 is the <SiteServer_Name | SiteServer_IP> of your CAS or standalone Primary site server).

 .\EnableFastUpdateRing1902.ps1 CM01

Tip: Some antivirus programs, particularly 3rd party (non Microsoft) antivirus programs can cause issues with the upgrade. If you have a 3rd party antivirus program installed on your site server, please disable (or temporarily uninstall) it prior to running the upgrade.

To start the upgrade open the ConfigMgr console and find the Updates and servicing node as shown here. You can see that Configuration Manager 1810 Current Branch is already installed. Click on Check for Updates in the ribbon.

And as instructed in the popup, open the DMPDownloader.log using CMTrace to monitor the process of checking for updates. Here you can see Generating state message: 6 which highlights that it’s found an applicable update.

dmpdownloader.PNG

Once it's found if you refresh the console you'll see it listed.

1902 available to download.png

In the ConfigMgr console you’ll see it’s in a state of downloading or available to download, if it's not downloading yet, right click to download.

download.PNG

Once it has completed downloading it will be listed as a state of Available. You need to click refresh in the ConfigMgr console to update the view.

Installing the Update

The state will change to Ready to Install once it has downloaded all the content.

ready to install.png

Right click on the update and choose Install Update Pack.

install update pack.PNG

when the Wizard appears, make your choice for pre-reqs and click next. Review the features included in this update pack and select those you want to use.

features.png

Note: You may also notice Pre-Release features that are greyed out, to turn them on see the steps after upgrading the console the bottom of this guide.

Continue through the wizard until completion at which point the update will be listed with a state of Installing. You can review the installation status by clicking on View Status.

Monitor the installation

At this point you can use CMTrace to open the CMUpdate.log file in <drv>\Program Files\Microsoft Configuration Manager\Logs (where drv is the drive letter you installed ConfigMgr on) to monitor the installation live. Note: The CMUpdate.log will take some time to start logging the installation of the update, so be patient if nothing appears to happen, it will. Look for a line similar to the one below to signal that the update has begun.

Detected a change to the "E:\Program Files\Microsoft Configuration Manager\inboxes\cmupdate.box" directory.

Keep monitoring the CMUpdate.log file to review details of what the update is doing.

cmupdate log for installation progress.png

Once the update is complete, you should see a hman notification in the log . Note: If you don’t see this and see an upgrade failure message then scroll up in the CMUpdate.log file to determine what the failure reason was. You can always retry an upgrade (maybe not enough available ram for example).

You can also verify the status in the monitoring node or click on Show Status in Updates and Servicing.update pack installation status.png

This status will continue to update in the 5 states listed:

  • Download
  • Replication
  • Prerequisite Check
  • Installation
  • Post Installation

You can click on any state to get details of what is happening at that time (tip: hit refresh).

nearly done post installation.png

After the update is complete, click refresh in the console and you'll be reminded to update the ConfigMgr Console via a popup. Make sure to update your console as you cannot use the new features until you do.

new console available.png

Click OK to upgrade your ConfigMgr console, and after all is done you’ll see the 1902 version listed in the console. The new version of ConfigMgr is 5.00.8790.1000.

1902 insatlled.png

After upgrading the site

Tip: If you want to gain access to the Pre-Release features, then select Sites, Hierarchy Settings, and place a checkmark in Consent to use Pre-Release features. Then go to Overview, Updates and Servicing and expand Features as shown below, you can then turn on (or off) any of the Pre-Release features you want to test in Production.

Related reading

    What's new in System Center Configuration Manager version 1902 - https://docs.microsoft.com/en-us/sccm/core/plan-design/changes/whats-new-in-version-1902
    Release Notes - https://docs.microsoft.com/en-us/sccm/core/servers/deploy/install/release-notes

Share this post


Link to post
Share on other sites


Maybe someone can help ? 

The Prerequisite check was passed, but when I try to install 1902 I get a .net Framework error.

 

sccm1902.JPG

Share this post


Link to post
Share on other sites

hi, are you doing a clean install of SCCM 1902 or are you upgrading to 1902 ?

Share this post


Link to post
Share on other sites

I'm upgrading from 1810, things i've tried

1: installed NDP47-KB3186497-x86-x64-AllOS-ENU.exe

2: installed MDAC (in some forums it is said it would help)

3: Run NetFxRepairTool.exe

4: Restarted the SQL and SCCM server twice

sccm1902a.JPG

Edited by J.Harren

Share this post


Link to post
Share on other sites

can you please attach your cmupdate.log and configmgrprereq.log

Share this post


Link to post
Share on other sites

I have found a workaround. I tried installing the update using the sccm manager on my windows 10 client and it worked !! I'm now on 1902. Thanks for your attention. 

 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...