Skip to content

PXE Boot help

Featured Replies

Hi

 

I am running SCCM 2007 on a Server2003, all use same server (VM)

 

All machines run in VM domain, everything is working well, I can install SCCM client fine, Advertisements work OK and apps deploy as they should.

 

I am trying to use the system to deploy an OS, WDS etc is configured..

 

When the (VM) client PXE boots it finds the DHCP server fine and loads the SCCM screen comes on so the system is booting from the boot wim ok, but after a while the client reboots and goes through the same process again (looping). This is happening on all clients

 

Thanks in advance

Keith

  • Author

Hi

 

I am trying this now, and the client boots to the SCCM screen, I dont think it gets far enough to hit F8 part..

 

As I am on a VMware domain, how do I inject a driver inot the .wim? and any idea what driver is required?

 

Keith

  • Author

Hi

 

I do have command support enabled in the boot.wim section, but I dont see a F8 option

 

I get to this screen

 

SCCM1.jpg

 

then the information box disspears, and the background is all I have, then 30 seconds to a min later the client reboots

 

Keith

  • Author

Hi

 

I have not got this problem sorted, turns out SCCM & WDS were mapped to different boot.wim files... not sure how or why

 

I now get to this point and it stops

 

SCCM2.jpg

 

I have followed the tutorial, deleted everything & followed it again, with no luck. I have put extra NIC drivers in the boot.wim also

 

Any help would be great

 

Thanks

Keith

Here's one thing to try if your winpe images won't get an F8 prompt. I came across a microsoft article that stated point blank, if you can't hit F8 to get a command prompt, it may be an incompatible driver. i.e. it's not that your nic card is failing, it's that you have an incompatible driver with that image.

 

Sure enough I was using the Lenovo 82577LM driver for our x201 laptops (win7 x86) dated 9/1/10 and as soon as I got the Intel dated 11/5/10 everything clicked... It's ALL about the nic drivers.

  • Author

Hi

 

Thanks for answer, I am using VMWARE for both server & client, I have added the VMware drivers to the boot.wim by extracting the drivers from an existing VM client (also XP) and using them.

 

I am not sure if another driver is needed other than the normal ones.

 

Keith

  • 2 weeks later...
  • 1 month later...

Hello,

 

I have this exact same problem.

When I hit F8 I get an IP address just fine, so network seems ok (I have not added a network driver though)

Through this cmd prompt I can also access the shared location where it should be looking for the Windows XP installation files without problems. So the share seems fine as well. I can ping the DP, and the domain controler for all it's worth.

 

I followed the "how can I deploy Windows XP SP3 using SCCM 2007 SP1" guide.

 

The smstslog is attached smsts1030.txt

and shows the following errors:

 

[Failed to connect to "\\SCCM-SV.SCCM.COM\SMSPKGE$\REX00005" (67)]

and

[Content location request for REX00005:2 failed. (Code 0x80040103)]

and

[Failed to resolve selected task sequence dependencies. Code(0x80040103)]

 

Now the weird thing is, there is no folder called SMSPKGE$

There IS however a folder called SMSPKGC$ (which however does not contain a folder called REX00005, but does contain other variations on this)

The log shows its looking for stuff in E:\ (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp) but there is no E:\ drive (hence there is no SMSPKGE folder)

 

We're a bit lost here. Any help would be much appreciated.

 

Thanks,

 

Paul.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.