Jump to content


jonrowe81

Established Members
  • Content Count

    29
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jonrowe81

  • Rank
    Member

Recent Profile Visitors

630 profile views
  1. Hey everyone, I'm working on a way to create a more mobile OSD task sequence, and for my environment..I have it working exactly how I need it to...but I'm wanting to tweak it a bit. I need some help though. I work in education, and we have 2-3000 laptops throughout our district. I have a task sequence that runs 100% wireless from a USB stick. What I would LOVE to be able to do is the following: Step one of the task sequence : Wipe all partition data on hard drive Step two of the task sequence : Create a "xGB" sized partition that will house the entire task sequence data/packages. The rest of the task sequence will reference this drive, as well as provide all the files required for the task sequence. Step three : it lays down the rest of the task sequence just as it does now off of a USB drive, except the "USB Drive" is replaced by the partition / data listed in the second step. Thoughts? I know this is probably possible, I just do not have the proper terminology / process down. Any help on this would be greatly appreciated. Thank you!
  2. Everyone, I've been on a mission to get a wireless task sequence working off of a USB jump drive/Stand-alone media OSD scenario, and i'm 99% there. I still have some long-term tweaks, but I am pretty pleased with it so far. The only thing I cannot get going is the computer rename script I have that works FLAWLESSLY over the wire, but since i'm having to join the wireless profile at the end of the task sequence I have to put the Gather/rename script there as well since it pulls our computer-name prefix based on gateway/site IP. This is all done through a custom customsettings.ini file on the gather / process rules step. The task sequence ends successfully, but the computer is not renamed. I look at the smsts.log in windows\ccm\logs and it shows where it goes through my gather phase and computes the OSDComputerName correctly, but it doesn't rename it. It then seems to finish the gather step and move on to my domain join step and eventual reboot/task sequence being completed, successfully. Here's the end of the log: Using COMMAND LINE ARG: Ini file = MPS-Rename.ini InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Finished determining the INI file to use. InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Added new custom property MYLOCATION InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Added new custom property MYSERIAL InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Using from [settings]: Rule Priority = MODEL,SERIAL,DEFAULT InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) ------ Processing the [20DL0079US] section ------ InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) ------ Processing the [sERIAL] section ------ InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Property MYSERIAL is now = MP1368SR InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) Using from [sERIAL]: MYSERIAL = MP1368SR InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) ------ Processing the [DEFAULT] section ------ InstallSoftware 1/31/2017 4:07:02 PM 3820 (0x0EEC) ------ Processing the [10.80.16.1] section ------ InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Property MYLOCATION is now = MPHS InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Using from [10.80.16.1]: MYLOCATION = MPHS InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Process completed with exit code 0 InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Property OSDCOMPUTERNAME is now = MPHS-MP1368SR InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Using from [DEFAULT]: OSDCOMPUTERNAME = MPHS-MP1368SR InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) ------ Done processing MPS-Rename.ini ------ InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Remapping variables. InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Property TaskSequenceID is now = InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Property DeploymentType is now = NEWCOMPUTER InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Finished remapping variables. InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) ZTIGather processing completed successfully. InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Command line cscript.exe "C:\_SMSTaskSequence\WDPackage\Scripts\ZTIGather.wsf" returned 0 InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) ReleaseSource() for D:\SMS\PKG\MPS00131. InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) The user tries to release a source directory D:\SMS\PKG\MPS00131 that is either already released or we have not connected to it. InstallSoftware 1/31/2017 4:07:03 PM 3820 (0x0EEC) Process completed with exit code 0 TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) !--------------------------------------------------------------------------------------------! TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Successfully completed the action (Gather) with the exit win32 code 0 TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Do not send status message in full media case TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Clear local default environment TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) Updated security on object C:\_SMSTaskSequence. TSManager 1/31/2017 4:07:03 PM 2828 (0x0B0C) I know this is something i'm missing, something very logical I should get about the placement but alas I do not. Can anyone help me on how I can get this last step going? TIA!
  3. Thanks so much, I appreciate the input/explainaion For the purposes of this deployment, would it be possible to do this as an offline install via USB, but somehow adding the final steps of joining our wireless profile, then adding it to our domain only over wireless? I only ask this bc I know we eventually will have to do a mass upgrade/osd task sequence and taking USB adapters around to 200+ devices will take forever quickly. I can't help but hope somethings coming down the pipe for wireless osd, since the number of Ethernet wired devices is decreasing Not trying to be stubborn, just curious Thanks!
  4. Checking back in here... Anyone out there have any clue how to make a task sequence work wirelessly? I am fine with jumping it off by USB jump drive. We have a lot of these S1 Yoga 12 devices, and it'd be a lot easier if we could get them imaging over wireless, rather than being plugged with a Lenovo USB Ethernet Adapter. Thanks!
  5. Revisiting this, I was curious if there was anyone out there that could help? Long story short i'm trying to get a task sequence together that will allow me to reimage a tablet/laptop device, which does not have an ethernet port...wireless only, and do the full task sequence...including joining the wifi profile (which we do already in our existing task sequence) and then joining the domain once connected to wifi. It seems simple, but it's just not working here. Any suggestions?
  6. I am having issues getting my standard way of reference imaging working, since this computer does not have an ethernet adapter. I may be overlooking something very simple, but I don't have a Lenovo Ethernet adapter so I am unable to pxe. If i'm not going the route of complete image / almost exactly like duplicating the harddrive, I need help getting a full offline image working (USB Adapter) where it will successfully lay down the image, software, drivers, but then join wireless network so it can join the domain and install sccm client/etc. Is there a straight out of the box option using MDT?
  7. Is there a way to take a full complete image for an offline kit that grabs all drivers/programs/everything where I could boot off a USB jump drive and copy the reference image byte for byte over to another identical machine? Example, we just bought 200 Lenovo Yoga 12 Tablets, all wireless (no ethernet) and I need to make a reference image to copy. It shouldn't be this hard, but i'm running into a lot of issues. If you can recommend a way to make a full reference image, i'm all ears. I know i'm making this harder than it should be. Thanks!
  8. I am trying to implement USMT into my task sequence, and it's failing on the capture state stage. My server is running the most recent version of SCCM as well as ADK 10.1.10586.0 It will connect to the state migration point, it creates the 74795756929954750638DAED58C11F01F72E71B19054B42163676F06DB0B31A0 share and then pops up the following error message: The task sequence execution engine failed executing the action (Capture User Files) in the group (Capture Files and Settings) with the error code 2147942436 Action output: ... SLog\scanstateprogress.log" /i:"D:\_SMSTaskSequence\Packages\MPS001C0\amd64\ExamView.xml" Command line for extension .exe is "%1" %* Set command line: "D:\_SMSTaskSequence\Packages\MPS001C0\amd64\scanstate.exe" "\\MPS-SCCM.magnoliaschools.net\SMPSTOREF_4D12FF22$\74795756929954750638DAED58C11F01F72E71B19054B42163676F06DB0B31A0" /o /localonly /encrypt /keyfile:*** /efs:copyraw /v:5 /c /l:"X:\WINDOWS\TEMP\SMSTSLog\scanstate.log" /progress:"X:\WINDOWS\TEMP\SMSTSLog\scanstateprogress.log" /i:"D:\_SMSTakSequence\Packages\MPS001C0\amd64\ExamView.xml" Connection request for "\\MPS-SCCM.magnoliaschools.net\SMPSTOREF_4D12FF22$\74795756929954750638DAED58C11F01F72E71B19054B42163676F06DB0B31A0" No credentials available for connecting to "\\MPS-SCCM.magnoliaschools.net\SMPSTOREF_4D12FF22$\74795756929954750638DAED58C11F01F72E71B19054B42163676F06DB0B31A0". See whether the share has already been connected. PreLonghorn USMT returned error (0x00000024). Look USMT log file scanstate.log for detail error message.. The operating system reported error 2147942436: Too many files opened for sharing. also The task sequence execution engine failed execution of a task sequence. The operating system reported error 2147942436: Too many files opened for sharing. when I take a look at the scanstate.log file, it gives the following: 2016-06-28 16:17:17, Info [0x000000] SCANSTATE.EXE Version 10.0.10586.0[gle=0x000000b7] 2016-06-28 16:17:17, Info [0x000000] USMT Started at 2016/06/28:16:17:17.458 2016-06-28 16:17:17, Info [0x000000] Command line: D:\_SMSTaskSequence\Packages\MPS001C0\amd64\scanstate.exe \\MPS-SCCM.magnoliaschools.net\SMPSTOREF_4D12FF22$\74795756929954750638DAED58C11F01F72E71B19054B42163676F06DB0B31A0 /o /localonly /encrypt /keyfile:**** /efs:copyraw /c /l:X:\WINDOWS\TEMP\SMSTSLog\scanstate.log /progress:X:\WINDOWS\TEMP\SMSTSLog\scanstateprogress.log /i:D:\_SMSTaskSequence\Packages\MPS001C0\amd64\ExamView.xml 2016-06-28 16:17:17, Info [0x000000] Failed.[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] Use /offline to run gather on this platform[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] USMT Completed at 2016/06/28:16:17:17.474[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] * USMT error code 36: [gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] | Use /offline to run gather on this platform[gle=0x00000006] 2016-06-28 16:17:17, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x00000006] The scanstateprogress.log file does not exist. I'm lost, any ideas? Thanks!
  9. Good morning, I have been working on getting an offline OSD task sequence working for some Lenovo Yoga 12 tablets we just purchased, and I do not want to go the route of doing them via ethernet dongle. I've got it to where it will go through the entire task sequence, but something weird is happening that I'm sure will be obvious to someone out there that can help. It goes through the entire task sequence, and when it gets to the end it has added the wireless profile and is connected, but the following has failed: 1) For some reason the local administrator account has a blank password, AND is disabled. The task sequence is set to set our specific administrator password. Not sure why this fails? 2) The last step before a restart is to join the domain, which fails for some reason. When it finishes the task sequence, it does not show any errors. It shows up at the login screen, which no logins will work. It does show that it's connected to our wifi at the bottom, which has connectivity to our domain controllers. Here's a pic of our task sequence order: Do i have something out of order, or just done completely wrong? Any input is greatly appreciated, thank you!
  10. I'm using FEP, I had a feeling of this. It's not affecting any other packages..very frustrating. I'm trying to find where to change it strictly on my server, will get these added. Thank you!
  11. Good afternoon everyone, I'm trying to create USB media to run a Windows 10 Task Sequence and i'm running into issues which the CreateTsMedia.log file point to my x64 drivers package. I'm getting the following error messages Hash could not be matched for the downloded content. Original ContentHash = 007C868454CA86DC799A80760F56183101B3DBD32F10B213A68A00843B794BC2, Downloaded ContentHash = B4AD83B57AD0F5C6C7D46C493F9C46DE72D4B68502DAED7641D82E45834C8AA6 Failed to stage package MPS000B6 (0x80091007) Error executing state StagePackage Error executing single pass when computing layout Failed to create media (0x80091007) CreateTsMedia failed with error 0x80091007, details='MPS000B6' CreateMedia.exe finished with error code 80091007 One thing I found online was this: https://sevenitblog.com/2014/05/26/sccm2012-antivirus-exclusions-common-0x80004005-error-hash-mismatch-or-content-mismatch/ Does this seem like it would be the culprit, and if so is there an updated antimalware policy template for 1602? I imported the one listed on the servers \adminconsole\XmlStorage\EPTemplates directory (there were only 4), it was named "SCEP_Default_CfgMgr", but it did not have all the things listed in the link above. Before I go adding all that mess, I was hoping there's a downloadable template somewhere. I would think the processes of Configuration Manager would automatically be blocked from an antivirus that it manages, but I guess i'm wrong Any input is greatly appreciated, thank you!
  12. Everyone, I have an SCCM Server that is currently running in VMware, but we're moving all our environment over to Hyper-V. We have moved everything over by using the Microsoft Virtual Machine Converter Tool, and so far have had 0 issues. It scares me to mess with my SCCM server, but we're going to have to get it over to Hyper-V one way or another. My question to you all, do we convert and move or back-up and rebuild? My environment is very basic. Single site, and one server (the one being moved) that houses all roles (site server/database/reporting/management point/etc). This is a school district, and we have 4 remote campuses throughout our town, and we have distribution points setup. That's the extent of our SCCM Infrastructure. I have a feeling the best route would be to back-up and rebuild the server from scratch. If that's the case, can someone point me in the right direction for best practices for that process? I'm open to any suggestion(s) for this. I appreciate any and all input, thank you!
  13. YPCC : do you happen to have a task sequence like this already you could possibly share the steps? That usually helps me a lot if possible, so I can put a logical order to it. Thanks!
×
×
  • Create New...