Jump to content


ace_ventura

Established Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by ace_ventura

  1. oh thank you! now i can see my adr! didnt even think about searching.
  2. Yep, sure am. Thanks for confirming it! I thought it was just me as I hadn't come across much info in my googling on it.
  3. Ever since I upgraded MECM to 2204, my ADR disappeared. I recently upgraded to 2205 to see if it would come back but it didn't. If i try to create a new ADR i can run through the wizard to create it but it never shows in the console. I can create a folder but no created ADRs show. Has anyone seen this before?
  4. Issue resolved! So turns out after digging around i had a group policy set for the client health script which is for my primary site only, this was running and changing the site the test clients were assigned to!
  5. nothing in execmgr.log related to it but i did find in locationservices the following: I don't understand why it switched. I saw the line Client is not assigned to a site. Cannot get portal info. but it didnt make sense to me when it was in fact assigned to TP1 its just after a few hours decided to switch to RYK Client is not assigned to a site. Cannot get portal info. LocationServices 4/1/2022 6:31:05 PM 9280 (0x2440) Current AD forest name is home.local, domain name is home.local LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Domain joined client is in Intranet LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) The MP name retrieved is 'CM01.home.local' with version '9068' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="63"/></Capabilities>' LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) MP 'CM01.home.home.local' is compatible LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) No AAD tenants information found. LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Persisted AAD on-boarding info. LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Refreshed security settings over AD LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Attempting to retrieve lookup MP(s) from AD LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Current AD forest name is home.local, domain name is home.local LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Domain joined client is in Intranet LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Lookup Management Points from AD: LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Name: 'CM01.home.local' HTTPS: 'Y' ForestTrust: 'N' LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Retrieved lookup MP(s) from AD LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) MapNLMCostDataToCCMCost() returning Cost 0x1 LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Raising event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233106.309000+000"; HostName = "CM02.home.local"; HRESULT = "0x00000000"; ProcessID = 9976; StatusCode = 0; ThreadID = 9280; }; LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Current AD forest name is home.local, domain name is home.local LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Domain joined client is in Intranet LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Successfully stored new Site Server Signing Certificate... LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Name : Site Server LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Thumbprint : E4B0A2D7FDB9556356B9F10E2ED961DD60E7794A LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Valid From: 2018-07-09, 03:29 LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Valid To : 2118-06-16, 03:29 LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Refreshed Site Signing Certificate over AD LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Removing outgoing queues, pending jobs because the client is switching cert or re-registering due to server reset request. LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Security settings update detected, restarting CcmExec. LocationServices 4/1/2022 6:31:06 PM 9280 (0x2440) Group Policy Site Assignment key HKLM\Software\Microsoft\SMS\Mobile Client has changed, will attempt to re-assign the client. LocationServices 4/1/2022 6:31:06 PM 9732 (0x2604) Security settings update detected, restarting CcmExec. LocationServices 4/1/2022 6:31:06 PM 3452 (0x0D7C) The MP name retrieved is 'CM01.home.local' with version '9068' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="63"/></Capabilities>' LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) MP 'CM01.home.local' is compatible LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) No AAD tenants information found. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Persisted AAD on-boarding info. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Refreshed security settings over AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Attempting to retrieve lookup MP(s) from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Lookup Management Points from AD: LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Name: 'CM01.home.local' HTTPS: 'Y' ForestTrust: 'N' LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Retrieved lookup MP(s) from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.468000+000"; HostName = "CM02.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Status Agent hasn't been initialized yet. Attempting to create pending event. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising pending event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.468000+000"; HostName = "CM02.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) No security settings update detected. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Attempting to retrieve lookup MP(s) from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Lookup Management Points from AD: LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Name: 'CM01.home.local' HTTPS: 'Y' ForestTrust: 'N' LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Retrieved lookup MP(s) from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Attempting to retrieve default management points from lookup MP(s) via HTTPS LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Current AD site of machine is Home.local LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) CcmGetLocationOverride LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) LocationOverride flags detected on Client LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Refreshing the Management Point List for site RYK LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Retrieved management point encryption info from AD. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.671000+000"; HostName = "CM01.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Status Agent hasn't been initialized yet. Attempting to create pending event. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising pending event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.671000+000"; HostName = "CM01.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Refreshing trusted key information LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Refreshed Root Site Code from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Attempting to refresh TRK from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Refreshed TRK from AD LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.733000+000"; HostName = "CM01.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Status Agent hasn't been initialized yet. Attempting to create pending event. LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Raising pending event: instance of CCM_CcmHttp_Status { ClientID = "GUID:CC0EB89D-C05B-43C3-9157-0B07C5C035B1"; DateTime = "20220401233115.733000+000"; HostName = "CM01.home.local"; HRESULT = "0x00000000"; ProcessID = 2444; StatusCode = 0; ThreadID = 864; }; LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Persisting the management point authentication information in WMI LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) Persisted Management Point Authentication Information locally LocationServices 4/1/2022 6:31:15 PM 864 (0x0360) ConfigMgr is no longer managing WindowsDO GPO. Set to default values. Mode = LAN. GroupID = empty LocationServices 4/1/2022 6:31:15 PM 864 (0x0360)
  6. it does not, there doesnt appear to be anything in that log regarding a site change at all.
  7. looking through the ccmsetup log no where in it does it reference my main primary site server cm01 with a site code of ryk, it does reference the correct site cm02
  8. the clients install just fine with no issues, its when i install the clients on a test vm using the tp1 sccm console after a while they switch their site from tp1 to my main site ryk
  9. I am trying to setup a test sccm server running the tech preview with a site code of TP1 in the same domain as my main lab sccm server with a site code of RYK. When I install the client on a windows 10 pc from the TP1 sccm console after a while it will be assigned to the RYK site. My boundaries for site RYK are setup as such: 10.0.0.2-10.0.0.99 (clients) 10.10.0.20-10.10.0.24 (servers a) 10.10.0.26-10.10.0.99 (servers b) so here i am excluding the IP of 10.10.0.25 which is the TP1 site server. My boundary group for my main RYK site is called production and it contains the three boundaries listed above. I do have another boundary which is my AD site but there are no site systems in it and its not a member of any boundary groups, My boundaries for site TP1 are setup as such: 10.0.0.200-10.0.0.210 (test clients) 10.10.0.25-10.10.0.25 (cm02 TP1 server) this site server also has a boundary which is my AD site the same as above and it also does not contain any members or is a member of any boundary groups VM-PC08 has an manual ip of 10.0.0.201 and is joined to the home.local domain, both site servers RYK (10.10.0.24) and TP1 (10.10.0.25) are members of the home.local domain as well. How can i run a production version of sccm along side a test tech preview version of sccm and have my clients assigned to the correct site. when I installed the client on vm-pc08 initially it was assigned to TP1 but after a while it moved to RYK. As you can see my boundaries and groups don't overlap so in theory that shouldn't be an issue but what am i missing? Client push is disabled on both sites. My clients get installed via a OSD TS on the RYK site and manually from the console in TP1
  10. Ok, I was confused since there was no preprovision step in MDT like there is in an SCCM TS, i followed your guide put the reg key for the XTS step before the first bitlocker step in the MDT TS and then again later in the TS and it appears to be working! I cant get it to escrow the key in AD even though i told MDT to do so, it just puts a txt file at the root of C.
  11. We use SCCM and MDT at the present time, have not migrated to SCCM task sequences yet for OSD, just using MDT. (We need to deploy machines to three different domains depending on the pc and point to two different management points and i haven't figured out how to create the task sequences to do this at this time) We do deploy the SCCM client as an application in the MDT sequences so that the machines are managed in SCCM. (We currently use SCCM for patching, package and application deployments and soon bitlocker and defender. We followed the steps to implement bitlocker in SCCM from this article. https://msendpointmgr.com/2020/04/02/goodbye-mbam-bitlocker-management-in-configuration-manager-part-3/. It explains how to set this up in an SCCM task sequence but im having a hard time getting it working in an MDT sequence. The MDT sequence doesnt have a pre-provision bitlocker step. Does anyone know how to do the bitlocker sccm setup stuff from that article in an MDT task sequence?
  12. I removed them and restarted the service. Now I get unable to connect to the remote server for the /Reports URL and I still get page cannot be displayed for the /ReportServer URL
  13. Here is the Report Manager URL. I didn't setup this particular server or install SQL.
  14. No, it doesn't host any other websites. I setup SSRS from within SCCM. Sorry for the late response. I'm not getting my notifications that someone replied to this post even though follow this topic is checked.
  15. No, I haven't solved this yet. It looks to me like its configured to use both http and https at least from what I can tell in the reporting services config manager. Where should I be looking?
  16. I installed the Reporting Services Point role on my sql2012 site system server. sccm is installed on my sccm primary site server. I set my network username under the reporting services point properties. My account is a full administrator on both servers. When I click on reports under reporting on the monitoring tab it waits for a while and comes back with no reports. I checked the smsadminui.log and get the following. [7, PID:4532][11/21/2014 08:23:44] :[ReportProxy] - User-specified default Reporting Point [sCCM.legislature.intranet] could not be found, [sql2014-SCCM.legislature.intranet] is now the default Reporting Point. [10, PID:4532][11/21/2014 08:23:45] :[ReportProxy] - User-specified default Reporting Point [sCCM.legislature.intranet] could not be found, [sql2014-SCCM.legislature.intranet] is now the default Reporting Point. [6, PID:4532][11/21/2014 08:23:45] :[ReportProxy] - User-specified default Reporting Point [sCCM.legislature.intranet] could not be found, [sql2014-SCCM.legislature.intranet] is now the default Reporting Point. [6, PID:4532][11/21/2014 08:24:07] :[sCCM.legislature.intranet] : Unable to connect to the remote server [7, PID:4532][11/21/2014 08:24:28] :[sCCM.legislature.intranet] : Unable to connect to the remote server [10, PID:4532][11/21/2014 08:24:49] :[sCCM.legislature.intranet] : Unable to connect to the remote server [6, PID:4532][11/21/2014 08:25:10] :[sCCM.legislature.intranet] : Unable to connect to the remote server [24, PID:4532][11/21/2014 08:37:26] :[sCCM.legislature.intranet] : Unable to connect to the remote server [24, PID:4532][11/21/2014 08:37:47] :[sCCM.legislature.intranet] : Unable to connect to the remote server [37, PID:4532][11/21/2014 08:39:58] :[sCCM.legislature.intranet] : Unable to connect to the remote server [37, PID:4532][11/21/2014 08:40:19] :[sCCM.legislature.intranet] : Unable to connect to the remote server When I right click reports and choose report options and select my sql2012 server I get the below error: --------------------------- Configuration Manager --------------------------- There is a problem connectiong to the specified reporting server. Please check the connection and make sure SQL reporting service is running on the specified server. --------------------------- OK --------------------------- Now if i login to my sql server and open the reporting services configuration manager and go to the report manager url section there are two urls: http://sql2012-sccm:80/Reports https://sql2012-sccm.legislature.intranet:443/Reports Clicking on the http link I get your standard there is a problem with the cert click continue to this website in IE. When I click continue I get the webpage cannot be found. If i click on the https link I get a windows security login box. I login with my user creds and it appears to work, I can get to the SQL server reporting services home page. If i try to go to either of these pages when Im logged onto my sccm server I get page cannot be displayed. Anyone have any ideas? Thanks!
  17. Im having an issue where under site system roles the distribution point role is installed and there is a boundary group set for it but when i go to the distribution points nothing shows up therefore when i follow the guide for OS deployment there are no distribution points to choose from when i right click the boot images or any image for that matter and choose distribute content. Do you have any idea what I am missing?
×
×
  • Create New...