Skip to content

Windows Deployment Services

WDS

  1. Started by DjCalvin,

    I went through these steps for capturing a Windows 2003 R2 X64 box. Deployment seems to go fine until the box reboots and begin's it's syprep. I'm getting prompted for my product key.. which was specified in the sysprep.inf What am I doing wrong? I have the sysprep inf in: D:\RemoteInstall\Images\Windows 2003 Captures\Win2k3X64R2STD\$OEM$\$1\Sysprep (where Win2k3X64R2STD.wim is the name of the capture image) The Sysprep.inf consists of (edited out key, pwd etc): ;SetupMgrTag [branding] BrandIEUsingUnattended=Yes [Components] AccessOpt=Off Appsrv_console=Off Aspnet=Off BitsServerExtensionsISAPI=Off BitsServerExtensionsManager=Of…

    • 0 replies
    • 4.4k views
  2. Started by ranjb,

    Hi Was wondering if someone can help. We have a bare bone customised image of WIndows 7 enterprise on a new WDS server we created. It runs on Server 2008 R2 so has the extra features of WDS such as driver injection but when we boot via PXE on a few laptops and choose the image, it begins the progress bar but then just says "windows is loading files" and just hangs there. It only seems to be with 2 specific laptops which have a CLEVO motherboard, other desktops and laptops seem to be fine. We have injected the proper network and chipset drivers into the boot image. There wasn't a BIOS update needed for these laptops. Whats odd when it boots up WDS it trie…

    • 2 replies
    • 16.8k views
  3. Started by eXtReMAL,

    So i have setup Win2k8 R2 Enterprise Server x64 With roles : AD DS , DNS, DHCP, WDS I have prepaired and sysprepped windows xp machine Also i made a bootable wim on a windows 7 basis and injected inf files for virtual machine network adapter.But i get something like this Can someone tell me whats wrong ?

    • 3 replies
    • 5.8k views
  4. Started by Way2New,

    Hello All, I have struggled for the last 3 weeks on imaging. Here is the story, August 10th 2010 I have 300 PC's being dropped in a remote location with ONE PC tech on the ground. The dream is, have the image (I do have a 2 PC test lab set up and the PC's are from the same build) ready to go with multicast on WDS so the PC Tech set's up the 300 PC's and presses F12. So, here is my problem ... over the last 3 weeks I have gotten the boot and install images set ... it took a while but my 'test' image is ready to be deployed. I deploy and I recieve the following error: WdsClient: An error occurred while starting networking: a matching network card driver was…

  5. Started by anmb,

    I have installed server 2008 as per the forums guide for wds, on a PC with the NIC connected to a switch and set the nic ip to 192.168.0.1 with the intention of just deploying windows images to machines plugged into the switch via pxe. I have set dns ip to the same as the nic 192.168.0.1 When I boot the client it gets as far as the mac and guid line then dhcp four dots and eventually fails saying it cant get dhcp or proxydhcp. If I ping 192.168.0.1 from the client it does not return. I have done ipconfig to check the nic address is 192.168.0.1 and I have disabled the windows firewall. What can I check to try and find where my setup is failing, or what am i do…

    • 4 replies
    • 6.6k views
  6. Started by MKANSIN,

    can you deploy windows xp using windows deployment service

    • 1 reply
    • 5.2k views
  7. Hi there, I am able to gather and deploy an Image of a Windows 7 computer using the attached answer file and a vbs script that will join the name and I can enter a computer name. I am able to gather this image using WindowsPE and ImageX, I can then deploy this image on a bare metal computer using ImageX. However, when I try to deploy this image using WDS it appears to ignore my answer file and start the OOBE. Is there a way I can tell WDS to NOT give the computer a name and join the domain and simply push the image out onto the computers. Essentially just like Symantec Ghost would do it? Your site and opinions on it have been great help so far. Would be great…

  8. Hi I am trying to install WS2008 Enterprise on a server which had a history of boot problems which I have posted previously in these forums when I was trying to deploy WS2003 using WDS: http://www.windows-noob.com/forums/index.php?showtopic=471 Each time I redeploy W2k3 using WDS onto a server, I have to run the Repair console from the CD after deployment, run FIXMBR and FIXBOOT beforeI am able to boot to the newly deployed W2k3 image. However, an installation from scratch using the CD would boot normally. This time, I ran W2k8 installation from the CD on to the same server (deleted, recreated, formatted the hard disks) and after the first phase of install…

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.