ludi2014

Did you download all sccm hotfikse and install . This error basically says that the machine can't obtain an IP address. Possible reasons for this include Your DHCP server isn't working If you use DHCP reservations you may have made a mistake entering the MAC address of this machine You don't have a DHCP pool set up for this subnet, or the pool has no free addresses Your DHCP server is on a different subnet and you haven't set up an IP forwader or DHCP Relay agent The network cable or port is broken kind regards sg www.learnmesccm.com

What about bios setting in machine. try to use another machine. kr sg

There is best use powershell ,think on package,drivers,tasksequnce remove connection to dp you will remove. Www.learnmesccm.com

Here is posible solution. kind regards sg www.learnmesccm.com

hello boys Can you confirm that your setup with collections looks like this. Kind regards SG www.learnmesccm.com

Try this 1.Manually copy boot image x86 wim file to remoteinstall\SMSTempBootFiles Folder. After done you might need to restart WDS Services(Windows Deployment Services) if needed. 2.Or make new winpe boot images and try to boot with new winpe boot images. kind regards sg www.learnmesccm.com

Are you shure your wds service not fail with any error. tray to restart. I think if you have teamview i can fiks this for you. ssake2010@gmail.com www.learnmesccm.com LinkedIn Profil:http://dk.linkedin.com/pub/safet-grahic/a0/842/b21

Just add "OSDPreserveDriveLetter=False" before the Apply OS step, which allows the task sequence to auto-correct the issue. kind regards www.leanmesccm.com

Jeli ti hardisk drev je formatovan kao E: provjeri . www.learnmesccm.com

Okey now you can start tasksequence and you got error 0x80070002. 1.which step in task sequence you get this error. 2.From the F8 prompt can you ping the MP/DP. 0x80070002 = "File not found". This is often seen when the DP can't be reached. 3. askTsequence of events is logged in SMSTS.log Task Sequence Stage WinPE - Before HD Format WinPE - After HD Format Windows - No Client Installed Windows x86 - Client Installed Windows x64 - Client Installed Task Sequence Completed x86 Task Sequence Completed x64 Log Location x:\windows\temp\smstslog\smsts.log x:\smstslog\smsts.log c:\_SMSTaskSequence\Logs\Smstslog\smsts.log c:\windows\system32\ccm\logs\Smstslog\smsts.log c:\windows\sysWOW64\ccm\logs\Smstslog\smsts.log c:\windows\system32\ccm\logs\smsts.log c:\windows\sysWOW64\ccm\logs\smsts.log kind regards sg www.learnmesccm.com

Please take some screenshot.....

0x80070002 Network accounnt on distribution point not assiggend

¨Hello Did you looked for error in the SMSPXE.log try this command on wds server wdsutil /initialize-server /reminst:<path to RemoteInstall folder> eksample: wdsutil /initialize-server /reminst:E:\RemoteInstall wdsutil /initialize-server /reminst:c:\RemoteInstall C:\Windows\system32>wdsutil /get-server /show:config restart wds wait 10 minuts try to find winpe boot images is copied to RemoteInstall\SMSImages folder

0 Check the WDS Services make sure is started. if not start , you might need to restart the services. 1.Enable On dsitribution point PXE 2.Before you update boot image to Distribution point. Make Sure Deploy this boot image from the PXE service point for both boot image is checked (Very important) Make Sure Both of the Boot image is updated to Distribution point .(win_x64 boot images and win_x86_boot images.) try to find winpe boot images is copied to RemoteInstall\SMSImages folder Check now the WDS Services is started. if not start , you might need to restart the services. kind regards sg www.learnmesccm.com https://www.linkedin.com/pub/safet-grahic/a0/842/b21

Can you please take some picture of your setup with role in sccm. I think this kan help you with 'Import Computer Information' http://blogs.technet.com/b/inside_osd/archive/2012/04/30/custom-role-based-administration-for-importing-computers.aspx kind regard sg http://www.learnmesccm.com/ https://www.linkedin.com/pub/safet-grahic/a0/842/b21

Take look to this: http://anoopcnair.com/2014/07/07/sccm-mp-internal-server-error-iss-call-httpsendrequestsync-failed-port-80-status-code-500/ Sg Www.learnmesccm.com

Try use this install parameters SITECODE= SMSCACHEFLAGS=PERCENTDISKSPACE;NTFSONLY SMSCACHESIZE=5 SMSMP=FQDN-MP FSP=FQDN-FSP

Thank to Peter and Jorgen I am glad for the comments about Workflows. I know both of you have good knowledge about SCCM. If you observe a few more little mistakes or suggestion always are welcome. Kind regards sg www.learnmesccm.com

It look like you are using push client deployments. http://technet.microsoft.com/en-us/library/gg681980.aspx The computer has an ADMIN$ share and able to connect from the SCCM server with the account used for Client push installation (You can check if you can access \\<Clientname>\ADMIN$ from the sccm server) In case this fails make sure that ADMIN$ is enabled in the client From the server to the client there are no DNS issue Firewall is not blocking the SMB traffic Account Specified for client push is correct and have permission to connect to the share The WMI connection also should be possible from the SCCM server to the client with the account used for Client push installation (You can use WbemTest and try connecting to \\<Clientname>\root\cimv2 and make sure you are able to remotely connect to client WMI) Make sure that there are no DNS issues Check the properties of the WMI and make sure remote connectivity is allowed Make sure the RPC port 135 and the Dynamic port range is opened in any firewall between the client and the server including the windows firewall. Kind Regards sg www.learnmesccm.com

Hi IT geeks I would like to hear about is anyone here who can understand my workflows. I would like any input from you .( ) http://www.learnmesccm.com/windows/sccmcollections.html kind regards sg

Once again thanks for the help . I'm technician I am not a teacher. It will be fun to get help from someone who has much experience as you. I have changed a bit what do you think now . You are welcome to get visio file and show me how I will do this . Kind Regards SG www.learnmesccm.com

Hello Niall Thank you for your comments . It's great that you looked at my website. There is no sense that I explain things step by step . I do not want the default blog . Many thanks for your input . I will listen to your comments and I'll try to formulate me beter and hope my message will be understood . Kind regards SG www.learnmesccm.com

Hello Design Guiden for SCCM 2012 with workflows. www.learnmesccm.com I hope you will liked

Well deserved, congratulations Good work - www.learnmesccm.com

hi guys, I found this site www.learnmesccm.com and you can download some workflows about SCCM and SCOM. Kind regards Ludi