Skip to content

Windows Server General

Post your Windows Server questions here

  1. I have a situation that doesn,t allow me to add the DHCP servers to the DNSupdateProxy group for Dynamic Update to work correcly in DNS. We have credentials set in the DHCP IP settings and have option 81 setup with out the option for Name protection. The DNS records are getting updated somehow with the user account that we are using but it isn't quick and there have been complaints. Can DHCP still update DNS Dynamically with out the DHCP servers being in the DNSUpdateProxy Group? If not, How is the user account owning the record and updaing the account without the help of DHCP? We have a ton of DNS update failures in the DHCP log and the only ones that are succes…

  2. I have a question regarding setting up a heartbeat between two nodes on a cluster (In this case Windows Server 2012) when the nodes are on separate physical sites connected over a WAN. When the public NIC's can ping each other and theheartbeat cannot, what usually is the issue? When I run the cluster validation test I get the following result: Network interfaces SERVER01 - Heartbeat and SERVER02 - Heartbeat are on the same cluster network, yet address 10.0.36.20 is not reachable from 10.0.36.15 using UDP on port 3343. I've checked the firewall on each server and port 3343 is open. I've asked the netadmin who oversees the Cisco router configurations whether port 3…

      • Like
    • 3 replies
    • 15.9k views
  3. Started by klez0011,

    hi i got below error while i click on prepare Active Directory in first step of install lync note:i joined my lync server to AD and both of them has ping each other please help i have try and spent lot of time to reach to this step

    • 0 replies
    • 2.8k views
  4. Started by klez0011,

    hi i use Server 2008 R2 Enterprise and i can't find RTC Group in AD user and computer? what should i do? i put picture below as i said

    • 0 replies
    • 3.1k views
  5. Hello I am setting up trust between two test domains both running in VMwhere on two diffrent boxes 1. called ThomasNetwork.local = DC is DCCORE ip address 192.168.0.222 2 called Newcompany.com DC is MynewDC ip address 192.168.0.240 I have set up continal forwading on both DNS and have set up the trusts on both DCs - eveything seems to be working I can validate the trust But when I try to add a user, I see my new domain but I cant find any users I talking some screen shots of my setup (done the same on both DCs)

  6. Hi, Here's a dilemma, the DHCP server on 2012 R2 is displaying APIPA 169.254.174.75. It is authorized, and, the static IP or FQDN is also authorized. I can't authorise the 169.254.174.75 from the DHCP server a it gives error "Parameter is incorrect". Using netsh command seem to do the trick, though. What I tried: - Removed DHCP and promote it again, successfully but it still shows 169.x.x.x. - Removed it from Active Directory Site and Services (CN=Configuration). - Tweaked the registry. - Disabled all other unused NICs. - RPC service is running. When I ping the server I get: reply from fe80::e543:83da etc... The funny thing is, that, it is leasing …

    • 1 reply
    • 6.6k views
  7. Started by hhancock,

    I can't seem to get the WDSClientUnattend.xml file to work properly. I am trying to deploy a Windows 8.1 image. I've create a unattend answer file with Windows System Image Manager. The answer file validates. I've added this answer file to the WDS server properties client tab under the proper architecture (x64). I am still prompted to input locale and credentials even though my answer file has this information already in it. On the client, the setupact.log file says, "There is no unattend file available on the server." I am confused because I see the file and I am able to browse to it from another computer on the network. I've created another post on TechNet. <?x…

    • 0 replies
    • 3.7k views
  8. I have been able to create a successful capture of a core server 2012 instance, but am having issues deploying it via task sequence. The target machine sees the advertisement in software center, but no smsts log is being created and the task sequence never actually kicks off. It starts to run, downloads, and gets stuck on "Installing". No progress bar ever appears. CCMExec log has no errors to speak of. Anyone every try this?

  9. Started by alim_long,

    How to setup a IPV6 PXE server using windows server 2012 or windows server 2012R2? Any document about this?

    • 2 replies
    • 10.2k views
  10. I have linksys router and his ip 192.168.1.1 and it is gateway and i have server windows server 2003 and ip is 192.168.1.10 and installing routing and remote access in it and it is enabled and every thing is working good before 10 days i disable routing and remote access after i disabled i cannot get wireless over router when i open mobile or laptop to take wireless it come as default ip 192.168.1.10 and also wireless not come how to cancel wireless ip 192.168.1.10 from coming and take ip 192.168.1.1 as default please help me

    • 0 replies
    • 2.9k views
  11. Started by iced,

    Hi guys, Did a search on secondary wds servers guide's but i did not get any hits, Is there a Guide on Secondary Sites? I'm familiar with setting up primary sites but i'm not sure how to set up secondary sites. Thanks guys.

    • 1 reply
    • 3.4k views
  12. Started by AlRlms,

    Student Account How can I make a GPO for students to make an examination with everything is closed even the interet and usb and only WordPad to work. what do i need to close to make it as safe as possible. Best regards

    • 0 replies
    • 2.6k views
  13. I am trying to figure out a simple way to add machines to our "Wireless Devices" Security Group in AD in my OSD task sequence. I have looked into several powershell scripts and VB scripts online, but can't seem to find one or modify one that will work. My machines are all deployed and added to their respective Site OU's during deployment which seems to be part of my issue. I don't want to create a script for each Site OU just to add these machines to the same security group. My technicians don't have access to add users to groups which is why I am trying to come up with an alternative "fix" that can be used during deployment. Any advice? Thanks, -Joe

  14. Hey Everyone, I'm testing out using Pooled Desktops and publishing Office 2013 via RDSH RemoteApp. Specifically Outlook. The trouble I'm running into is that when you run one of the applications via RemoteApp in a pooled VDI, "This Computer" is the RDSH and not the VDI, Which can cause problems because we are going to use UPD on the Pooled Collection. Given that UPDs are collection specific, is there a way to get Office 2013 running on RemoteApp to register the VDIs user directory instead of the RDSH's User directory? Sorry if this does not make much sense. Also, I could be missing something very simple that I just wasn't able to find in a search or it may not be po…

  15. Hello All, I just wanted to share this post I just wrote on some of the changes in the Windows Server 2012 R2 update. Read the post here: http://adinermie.wordpress.com/2014/04/06/windows-server-2012-r2-update-1/

    • 0 replies
    • 3.8k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.