Skip to content

Windows Server General

Post your Windows Server questions here

  1. Hello, I was curious if anyone is using MBAM and also storing the Bit Locker recovery keys in active directory? We are starting to Bit Locker all of our workstations, and we are currently storing the recovery keys in active directory. I was thinking about implementing MBAM also, but management wants the keys to be in active directory. Can you store the keys in a MBAM database as well as in active directory? My searches have given me conflicting information. Any help is much appreciated Ron

    • 6 replies
    • 12.4k views
  2. Started by SCCMNoobster,

    Hi I am running VMWare 5.1 and have recently had an issue with a Virtual Server. It said that it needed consolidating and I deleted all the snapshots through snapshot manager and then told it too consolidate but it came up wih the following error “This virtual machine has more than 100 redo logs in a single branch of its snapshot tree. Deleting some of the snapshots or consolidating the redo logs will improve performance. The maximum number of redo logs supported is 255.” I followed this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2053489 and once all the files where moved over and I tried to run m…

  3. Started by OliAdams,

    I am trying to install and configure MBAM 2.0. I have installed all of the components on two separate servers. Server 1 has sccm 2012 integration and gpo policy templates. Server two has the rest. When I load Group Policy Management the templates do not appear. I have manually extracted and copied the templates in the local policy definitions and still nothing. Any ideas?

    • 0 replies
    • 3.1k views
  4. Hi, I have Server 2012 R2 on my workstation. I want to use this to Build & Capture new VM's, and also have fast nic speed for general usage. I work a lot with VHD's/ISO's/Backups etc....so speed is important. I have a Cisco 2960S - 10Gb link to Core, and 10Gb link to main Fileserver and Hyper-V Host. I have purchased an Intel ET Dual port gigabit network card....and was hoping to increase my transfers from approx 100Mb/s to near 200Mb/s. I have teamed in Server 2012 R2 GUI, mainly trying Switch Dependent + Dynamic I have also used powershell, and changed the LBA mode to all options available. I cannot seem to get throughput above 100Mb/s even…

  5. Hi, I have done a search on this matter to seek help but couldn't really find anything What I am looking for is help to set up a fully functioning server with a reliable group policy that could be implemented in a school I know the very basic of setting up the AD, DNS, DHCP. I have got this far and added a user that can successfully log in. What I would now want to know is what are the best practices to set up group policies etc Could someone put together a basic step by step of what to do. I'm not really asking for details otherwise people will be here all day and night. Just a simple AD, DNS, DHCP, Group Policies, etc and so forth Not really sure w…

    • 0 replies
    • 3.5k views
  6. Started by larson,

    Hei, im running a wns2008 r2 with hyper-v as host. Im installing WDS and MTD on a wns2012 gust os. In the host OS i have made a share called "Deploymentshare", and created a folder inside called "RemoteInstall". Sat the permissions to admin and everyone. (read/write) Mounted the share as a network drive in the guest OS (no problem everyting worksfine). Looks like this " Z:\Deploymentshare". I have stumbled over 2 problems: WDS configuration: I cant set the remote install folder under the deployments server configurations (early), I'm trying to change it from C:\RemoteInstall to Z:\Deploymentshare\RemoteInstall I get the error: "The filename, direct…

  7. Started by icehac,

    Hello all, I am having an issue with my first SCCM setup. I am trying to do PXE boots over the network, and it is successful to an extent...however, after the winpe.wim files loads on the pxe client, I am greeted with a command line that says "wpeinit". I have the proper drivers loaded for this machine and the operating systen I am trying to deploy (Windows 7). If someone could shed some light on some suggestions I would greatly appreciate it! Thanks.

    • 0 replies
    • 3.7k views
  8. Just wondering if anyone had a recommended best practice for page file size and settings for Windows Server 2012. Does the old 1.5 X installed memory rule still apply? A quick Google found this: http://social.technet.microsoft.com/wiki/contents/articles/13383.best-practices-for-page-file-and-minimum-drive-size-for-os-partition-on-windows-servers.aspx What is everyone out there using for their page file settings? Thanks!

  9. Good morning people, I'm having a problem in my test environment. I've got three physical machines running Windows Server 2012 R2. One being a domain controller and the file server (I've got a bunch of disks in there, one for every Hyper-V host to store the VM's on) and two Hyper-V hosts which are not clustered. I've got a virtual network of 16 servers running without any problems whatsoever, the only problem that I'm facing is that I cannot move virtual machines from one host to another. Due my limited hardware capabilities I'm forced to move some VM's around so the CPU doesn't have to be at 70%+ most of the time. I've got two virtual Windows 8 desktop machines w…

    • 0 replies
    • 4.1k views
  10. Hello All, After upgrading my physical host to Windows Server 2012 R2, I noticed something different with Hyper-V. When you create a Virtual Machine (VM), you can choose to specify the Startup RAM, and also to enable Dynamic Memory. This is not something new. However, I have noticed that if you use 512 MB for the Startup RAM (which I usually do), you encounter an issue. NOTE: The lowest amount of RAM that you can specify for ‘Minimum RAM’ is 32 MB, and the highest amount of RAM (at least in my case, as I am not sure if it is based on the physical RAM available) is 1048576 MB (or 1024 GB, aka. 1 TB). When you use less than 1024 MB (aka 1 GB) of RAM for…

    • 2 replies
    • 10k views
  11. Started by Balthier,

    I'm trying to upgrade Server 2008R2 from standard to Enterprise, I run the following command dism /online /set-edition:ServerEnterprise /productkey:489j6-vhdmp-x63pk-3k798-cpx3y /norestart Everything goes fine until "Starting to apply edition-specific settings..." Then I receive the following error, Error:0x80220001 An error occured while applying target edition component settings. Has anyone experienced this issue before?

  12. Hello all, Can anyone able to tell me, how to have a dictionary of common words and passwords and restrict users from using them for their domain passwords. words like these need to be banned: Lucky lucky Password Password123 password 123 1234 12345 etc

  13. Hi everybody, I would like to ask help with the role "Remote Desktop Services" under windows server 2012. The main objetive is provide pools of virtual machines for users who need one because his notebook is too old for install windows 7/8. People then will works with their personal dektop integrated in AD with all domain resources available. Current Status: I have installed 3 machines called "vs-dc" (domain controller), "vs-test04" (windows server 2012) and "vs-test05" (windows server 2012). In each machine I have done: * VS-DC: I have not change nothing in AD (including schemas). * VS-TEST04: I have installed remote desktop services. In this server is runnin…

  14. Started by jepoytengco,

    Hi, just discovered our company's 2 DC (DC1 and DC2) have both same ObjectSID. I'm not 100% sure if this is the cause to some of the problems in our domain like i.e 1. When a computer name is disjoined in our domain, the next time that you joined a system with the same computer name, it will proceed in joining the domain but during the first time that a user will login using his/her credentials, Trust relationship will happen. The only time this user can login is when he/she unplugs the cable. The only remedy we have at this point is to change the computer name. I've experienced disjoining a computer system on a domain that doesnt have any issues but as soon as I…

  15. Started by support-info,

    Hi, As part of a project to reduce the size of daily backups I need a solution to automatically move older files and nobody uses a storage does not save him. (the users should not see a change). I have found the DiskXtender software that does this. Do you have a similar solution to DiskXtender? best regards, Support-info

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.