Software Update Point
updating clients from SCCM with WSUS integration
322 topics in this forum
-
So, we're deploying IE11 to several small groups in anticipation of a larger deployment site-wide. We have Win7-x64 machines with IE8 exclusively. Our environment requires KB2929437 patch for "Enterprise Mode", which we have set up and configured already. The problem we're running into is that IE11 gets installed just fine during the maintenance window, but that's it. KB2929437 is approved for install, but won't install until IE11 is present (obviously). Since the clients do an update check and install once per maintenance window, we end up with clients that have IE11 but not KB2929437. Eventually KB2929437 will install (next evening it seems), but the user has alread…
-
-
- 3 replies
- 6.8k views
- 2 followers
-
-
hi, Sorry in advance, it's a topic that gets repeated... but Is it possible to run WSUS and SUP in the same environment, if so how? We are doing a migration of services, and while the migration is taking place there is a requirement to have both SUP and WSUS in the saem environrment patching respectively. I know the problem of GPOs overriding SCCM SUP client settings, but is there a way to have both? I've read suggestions of multiple wsus servers, GPOs linke dto different OUs etc, but in the end you still have the problem of ALL machines having an SCCM client on them, but not all been patched through SUP. Has anyone worked with a similar issue? Thanks
-
- 5 replies
- 5.2k views
-
-
Hi Guys, I've been reading these forums, and got a lot of help from here, so firstly: thanks! I was hoping someone could help me troubleshoot a current issue with Software Updates. I've got an SCCM 2007 infrastructure, and a little while ago Updates just stopped reliably working, some patches would go, others wouldn't I've got nowhere troubleshooting it, so I'm at the point where I've decided to just clear everything off and try again. So I've gone in to SCCM and cleared out all of the Update Lists, Templates, Deployment Packages, etc. I've removed all the update content, too. I've then started again, small-scale, with a handful of PCs and updates. I'm still getti…
-
- 1 reply
- 5.9k views
-
-
Have been searching for a while now but i am unable find an explanation for the Windows 10 products that are available through Software Update Point (WSUS). What can i expect from those products, whats in it, when should i use them etc..? Can someone explain them to me or point to a good reference document/URL? Thanks!
-
- 1 reply
- 4.1k views
-
-
No person on the internet has encountered this. So why am i? wsyncmgr.log WCM.log
-
- 1 reply
- 4.2k views
- 1 follower
-
-
Hello, came in to the office today to the network almost completely hosed. my networking team saw all my workstations reaching out to http://wsus.ds.download.windowsupdate.comat the same time. it is patch Tuesday so i know that was a factor as well. i have had SCCM in place for over a year now and my SUP has been working fine as well. MY ADR's are set to go to Microsoft if the MP or DP is unavailable, but again, this has been place for awhile now. i have no idea why all my clients decided to reach out to Microsoft instead of my server. i assume they never did before because this is the first time my bandwidth has been completely saturated by reaching out to Microsoft…
-
- 3 replies
- 3.8k views
- 1 follower
-
-
Hello I'm a new user of sccm. I have launched system update. Now, I want to see the progress of the deployment. I looked for a report to do that but I didn't found any one. can you tell me how to do it ? thank you
-
- 0 replies
- 3.1k views
-
-
I am trying to update my Windows 10 test workstations to update 1511 through SCCM. I have both KB3105211 and KB3105213 downloaded and deployed, but my clients are only getting KB3105213 and remaining at Windows versions 10240. They are also showing compliance without KB3105211 installed. When I check the cache the update is on the workstation but it never gets installed. My SUP is only checked to sync Windows 10 and Windows 10 LTSB updates. Any ideas on what is going on? Running SCCM 2012 R2 SP1 on Windows Server 2008 R2
-
- 2 replies
- 5.7k views
-
-
Hi, in my System Center 2012 R2 SP1 environment, I have multiple ADRs to deploy updates for my clients and servers. The deployment packages are stored on multiple Distribution Points (which are defined in the ADR) in different locations. After my company got a new department, I deployed a new distribution point on site and wanted to add this new location to the ADR, so that the deployment package is distributed to the new site after the next run. Unfortunately, if I edit the ADR, I can not add an additional distribution point. Is there a way to do this without deleting the ADR,deployment package and upddate group ?
-
-
- 2 replies
- 4.7k views
- 2 followers
-
-
I had to redo WSUS and SUP on my SCCM server. It shows that my updates are downloaded even though none of them are. How do I fix this? Is there a utility I have to run?
-
- 0 replies
- 2.7k views
- 1 follower
-
-
Hi to all, I'm currently have the issue that I cant deploy Windows Updates through SCCM. I've already check if some GPO probably changed the WSUS settings, but I couldn't find anything. At the WUAHandler.log I could find suspicious entries. the WUA Managed server policy point at the wrong Server "SUP-02". I've one Site with one primary site server SUP-01(all roles) and one site system server SUP-02 (compoment server, distripution point, site system and software update point role). I created Boundaries for IP address ranges and for Active Directory Sites but the Client gets the wrong SUP and install no Updates. What can be the Problem? Its a WSUS Update Source ty…
-
- 0 replies
- 4.8k views
-
-
Simple question really. What's the difference between an update with a set bulletin ID (say MS10-xxx for a 2010 update) and no bulletin ID?
-
- 3 replies
- 10k views
- 1 follower
-
-
I'd like to preface this post by saying I've performed many SCCM/SUP installs and never had an issue like this before. We recently decided to rebuild our WSUS server and been having nothing but problems, and believe the issue may reside with IIS itself but I'm not quite sure. Our WSUS environment is not complex at all, it's a single server that connections directly to Microsoft without proxy settings. Please let me know if any other logs or information would be helpful. Any help or suggestions would be greatly appreciated! Environment Details Type: Single Primary Site Server SCCM Version: SCCM R2 SP1 CU1 (5.0.8239.1203) OS Version: Server 2012 R2 (WSUS and SCCM) Hardw…
-
- 3 replies
- 39.4k views
- 1 follower
-
-
hi guys Some of the security updates is SCCM are show as not required for a majority of computers in reports and monitoring. For Example The KB2978120 is not required for 3039 computers. these computers are deployed from the same image and usually have the same version of programs tons of other updates have the same issue and are shown as not required for computers . I want to know that does this show a problem or is it expected behavior? image is attached for more information. thanks.
-
- 0 replies
- 2.6k views
-
-
Hi, First of all i'd like to thank you for the awesome SCCM 2012 tutorial i found here. It was a great help for setting up our sccm servers. Now i have a small issue with Out of Band patches released by Microsoft outside patch tuesday. For the regular patches(released on patch tuesday) i have some ADR's which deploy the updates in 3 phases. I don't want to deploy directly to the production machines so the first two phases are like a test run to make sure we won't encounter any problems when applying patches in production. I tried to create a new ADR for any updates that may be released outside the normal patching window, but i wasn't able to filter out the …
-
- 3 replies
- 5.4k views
- 1 follower
-
