Skip to content

Microsoft Deployment Toolkit (MDT)

Microsoft Deployment Toolkit

  1. Started by ace_ventura,

    We use SCCM and MDT at the present time, have not migrated to SCCM task sequences yet for OSD, just using MDT. (We need to deploy machines to three different domains depending on the pc and point to two different management points and i haven't figured out how to create the task sequences to do this at this time) We do deploy the SCCM client as an application in the MDT sequences so that the machines are managed in SCCM. (We currently use SCCM for patching, package and application deployments and soon bitlocker and defender. We followed the steps to implement bitlocker in SCCM from this article. https://msendpointmgr.com/2020/04/02/goodbye-mbam-bitlocker-management-in…

  2. I am seeking to know who has set this up and some dialog or docs on how to configure client setup in MDT for deployment both during OSD and POST via PDQ. I have seen a lot of different pieces but nothing end to end as this is a Air-Gap environment. We do have a Domain structure with AD. Moving to add WDS for PXE OSD. Few laptops so these will be mostly for encryption purposes not with a pin as 98% are Desktops and shared. Any ideas or direction as well working on a local lab to work this out as a POC then move to prestage testing.

  3. Started by rfdr81,

    Hello There is any way, using MDT, at the end of the deployment,automatically run sysprep, for user that will use the unit where the OS was deploy can achive OOBE. Thanks

    • 0 replies
    • 2.8k views
  4. Hello Community So, I am configuring the UDI Front End that is part of MDT SCCM integrated setup. The issue I am running into is that when trying to configure the option: "Add Software To Group Wizard". As required I created a collection and deployed the software to that collection. BUT when I go back over into the UDI designer and search for the desired application, it shows up but is grey's out. I don't understand why. Since "OK" is also grey's out, I can't move past this point. Any advice would be greatly appreciated.

  5. Using latest versions of MDT and ADK. I have created images for Server 2012 R2 and they work great. Tried capturing and deploying Server 2008 R2 SP1 and it will not successfully install. The capture works great with MDT. Get 0 errors. When i deploy the OS, it will completely apply the OS to the HDD, but then after it reboots it will just go to a Windows Boot Manager error with status: 0xc000000d. I have tried a combination of older versions of MDT as well as ADK versions. Still get the same error. I cant figure this one out. Happens for both UEFI and non UEFI. VM and physical. I even tried using the vanilla WIM from Microsoft volume license center and it gets the same err…

    • 0 replies
    • 2.7k views
  6. Hi I have a MDT deploy for both Windows 10 and Windows 7, without SCCM I have also a deployment database there is all info about like, computername and MAC address etc.. The problem is then I trying to start a deploy with PXE boot , wont the deployment database start to do a collect to the client, the deployment running without info from Database and then the deployment is finish. The error message is about access denied or database is not exist. It have works before and SQL database is running .. How will I do to troubleshooting that ? Sokoban

  7. Hi all, I have a standard MDT installation, Version: 6.3.8456.1000. I setup a test task sequence with a single command line step to launch the UDI Wizard using the default xml. The very first time the wizard launched successfully, but on subsequent attempts the wizard page appears blank with the only working button being Cancel. I've tried creating reinstalling MDT and creating a new deployment share, I've tried creating a new xml with the same name, I've tried creating a custom xml and specifying it with /definition:custom.xml in the command line. Same result. Does anyone have any fixes? Thanks!!

  8. I am trying to create a task sequence step that only runs when the first 6 characters of the computer name equal a certain string. From what I can tell, I can't use a wildcard or logic in the Task Sequence Variable Condition under the Options tab. Example: Given the following computer names, ABCDEF001, ABCDEF002, and BCDEFG001, the task sequence step should only run on ABCDEF001, and ABCDEF001. It should not run on BCDEFG001. I have tried: Task sequence variable OSDComputerName equals ABCDEF% Task sequence variable OSDComputerName equals ABCDEF* Task sequence variable OSDComputerName equals ABCDEF$ Task sequence variable #Left("%OSDComputerName%",6)# e…

  9. I recently captured a custom Windows 10 image (.wim) Added in workbench as available operating system. During the MDT Deployment Wizard, the computer name is auto populated in correct format, per the set rule in the deployment share. Once the system is done imaging, it somehow loses that correctly assigned name and is assigned the WIN-XXXXX. (XXXX) represent a random name. I am not sure where it is pulling the random name. It is not the serial number. Rule is set not to exceed 15 characters. Serial Number does not exceed that. Anyone have any suggestions? Been struggling with this for two days now.

  10. Hi all, I am looking to deploy images through a MDT laptop server locally through a switch to a pc with no internet. Is this possible?

    • 1 reply
    • 2.6k views
  11. Started by Sokoban,

    Hi I have install a MDT to a new server and I will transfer CSV files after I have Export from the old server. How will I do to do that ? I have three files, like :- Computers Roles Make and Model Please help :-) ---- S-O-K-O-B-A-N -----

  12. Hi everybody, I'm trying to install Windows 8.1 Enterprise with MDT 8456 and a WSUS Server using the Standard Client Tasksequence. After the installation of the OS the deployment stucks at the Pre-Appliction Windows Update step. No issues at all with other OSes like Windows 10, Server 2012R2, Server 2016 and 2019. Any suggestions? Greetings, Joerg

    • 1 reply
    • 2.9k views
  13. Hi Team, We are trying to deploy Windows 10 Image using MDT and currently stuck on one of unwanted display. We have selected option to install multiple application to select Office and OS Language Pack while starting the deployment. However we can also see the folders which have been created in Application Folder to select from. We do not want the highlighted folders to be visible to deployment team:  How do me make these folders hidden or remove them from deployment page. Any leads will be appreciated. Thanks, Aakash Saxena

    • 0 replies
    • 2.4k views
  14. Started by mla,

    Hi, MDT 2013 in place serving multiple pc models for W7 deployment. Installed fresh 8450 MDT for W10 deployment. W10 to capture is 1809 and the same OS imported to MDT. ADK 1809 in place. Trying to capture W10 VM fully patched. No apps installed. Just clean W10. The capture fails. Here is BDD https://1drv.ms/u/s!Av7GxVRWTkZlghEAiAFiiduHrpl8 And here is a screamshot of LiteTouch with failure report:

    • 1 reply
    • 5.3k views
  15. We have been using the guides on this site for over 2 years without issues, but for some reason I can't find a guide that helps me through this issue. We have been deploying Win 10 Enterprise 2016 without issues (Add PC and MAC to SCCM, add new computer to group, boot PC to PXE and done....) We want to deploy Win 10 v1803. Here is what I did; Added the OS to SCCM - Distributed Content Copied the OS Task Sequence for 2016, named it 2019 Edited 2019. The only change the OS to Apply to the 2019 Deployed 2019 to the same groups (Unknown Computers and Deploy Windows 10) PC booted into PXE as expected, but is ONLY presented with the 2019 T…

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.