Everything posted by dj3094
-
Clients incapable of Https communication report
Hello Experts, I ran the report "Clients incapable of Https communication", I have seceral clients that are incapable, when I check the cert they are not expired. ALso the report is missing lot of machines. Is there any cycle or something I can run on a machine to change last report date? Any suggestions to make my clients capable Thanks in advance DJ
-
SMS_MP_CONTROL_MANAGER STATUS CRITICAL
there are no error messages, but I see many warningsMP has discarded a report when processing the relay: corruption or invalid user definitionPossible cause
-
SMS_MP_CONTROL_MANAGER STATUS CRITICAL
hello all,under component status, I see SMS_MP_CONTROL_MANAGER STATUS CRITICAL. what steps do i need to perform to clear this?RegardsDJ
-
TPM fails to activate(dell)
Thanks for the reply. I was not doing that, but will give it a try
-
TPM fails to activate(dell)
Hello experts, We are trying to enable bitlocker and we have everything setup and it work fine with TPM 2.0. But with TPM 1.2 it fails to activate. We created TS to deploy these using dell command and configure utility all the TS is doing below commands 1) Install HaPIdrivers 2) set bios password 3) enable tpm 4)activate tpm 5)install MBAM client 6)trigger 7)restart it works on TPM 2.0 and fails on 1.2. ALso I tried to activate manually on TPM 1.2 and it fails too below message. Error in Setting the Value.Note: To set TPM - 1. Admin Password must be set , 2. TPM must not be owned and 3. TPM must be deactivated. Anys uggestions? Regards
-
Guide for Adobe Reader DC 2017 and SCCM?
Hi where should we provide license key
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
I added the variable after install on login screen I saw polish language and was happy. but as soon as I tried to login, everything is in english. Any suggestions please
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
Thanks I will try adding set task sequence variable an give it a try
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
thanks so just add set task sequence variable at start of the TS? and remove the unattend.xml? Also i declared variable in TS and to run if Region value and Launguage value matches. How can I overcome that
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
Thanks for the reply, How can I hardcode them in unattendxml? just replace osduilanguage to pl-PL <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-International-Core" processorArchitecture="wow64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <InputLocale>%OSDInputLocale%</InputLocale> <SystemLocale>%OSDSystemLocale%</SystemLocale> <UILanguage>%OSDUILanguage%</UILanguage> <UILanguageFallback>%OSDUILanguageFallback%</UILanguageFallback> <UserLocale>%OSDUserLocale%</UserLocale> </component> </settings> <cpi:offlineImage cpi:source="wim:c:/install.wim#Windows 10 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" /> </unattend> Thanks
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
Hello Nail, I created task sequence according the post. I am deploying on baremetal. I dont have any HTA. Is there any way i can provide region value and language value. I am deploying only in polish and english. SO i have added only polish. any suggestions? Regards
-
How can I install Windows 10 language packs offline with an MDT Integrated Task Sequence in System Center Configuration Manager (Current Branch)
Thanks Nail, Is there any frontend i can use just to intput Launguage value and regional value? Thanks
-
How can I display custom messages in a task sequence using PowerShell in System Center Configuration Manager (Current Branch)
the below script seems to be working, I will confirm after testing $TSProgressUI = new-object -comobject Microsoft.SMS.TSProgressUI $TSProgressUI.CloseProgressDialog() #connect to Task Sequence environment $tsenv = New-Object -COMObject Microsoft.SMS.TSEnvironment # read variables set in the task sequence $title = $tsenv.Value("title") $message = $tsenv.Value("message") $returncode = $tsenv.Value("returncode") $messagebox = new-object -comobject wscript.shell write-output $messagebox.popup("$title ",100," $message ",0) $returncode thanks
-
How can I display custom messages in a task sequence using PowerShell in System Center Configuration Manager (Current Branch)
Thanks, how can I adjust the timeout. When I select the timeout(display custom message step) its throwing error
-
How can I display custom messages in a task sequence using PowerShell in System Center Configuration Manager (Current Branch)
May be i am wrong, I am deploying couple applications in custom TS. When the user run from software center it pops up message to close some applications. but what happens if I deploy it as required, does to run and popup message and wait to press ok or it continues?
-
How can I display custom messages in a task sequence using PowerShell in System Center Configuration Manager (Current Branch)
Great post, I am using this in my TS on it worked good all time. But is there any way we can show message for x amount of time and after that time TS continues? Any suggestions? Regards Anche
-
TS wont continue after upgrade (Stand alone media)
hello experts,I created upgrade TS and it has some post tasks. TS works well if I deploy to collection. I created standalone media(USB) for the same TS and when I launch launchmedia.cmd it launches TS and completed the upgrade and wont continue. i see the screen working on updates and when it reaches 100% it comes to lock screen but wont do the post tasks. Any suggestions please.RegardsDJ
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
thanks, I have added registry change to change setupcomplete.cmd it seems to be working. I will posts the results.
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
Thanks alot, I read the post and added the drivers, i will deploy this and post back results. this looks good?
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
I see some errors in setuperr.log Thanks do i have to concern setuperr.log
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
thanks I will create driver package and will apply before TS. it was all working good before. I deployed a TS to update bios and drivers and it all started.
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
No i have not applied any drivers
-
How can I use the Upgrade Task Sequence in System Center Configuration Manager (current branch) ?
thanks for the reply. I followed the guide form the link below, i created rhe upgrade package and TS. I deployed it on my test machine and it completed the upgrade and do some post tasks and then machine stuck in restart loop. it pops up dell logo and restart again. Thanks
